Your search resulted in 149 documents. Displaying 25 entries per page.
Field trial with poles of Scots pine treated with six different creosotes
1996 - IRG/WP 96-30115
In the middle of the 50's field trials with creosote-treated poles were started in France, Germany and Sweden. The trials were initiated by WEI (Western-European Institute for Wood Preservation). Six different creosotes were used and 40 poles per creosote were installed at each test field. Results after 39 years of exposure in Simlangsdalen, Sweden are reported. Poles treated with a heavy creosote were less decayed than poles treated with medium-heavy creosotes. Poles treated with a light creosote were most decayed.
Management of the wood and additives wastes in the wood processing industries: Problematics and technical answers review
1996 - IRG/WP 96-50073
Management pathways for pure wood subproducts are well known and used; but as soon as additives like preservatives, glues, varnishes or coatings are present within the wood wastes, their disposal or valorization becomes more tricky. The different kinds of mixed wood wastes of the wood processing industries, from the sawmill to the furniture manufacture, are identified herewith and their diversity is examined. These wastes can be classified according to their danger characteristics, taking into account the type of additives, their concentration, their availability for the environment, the physical state of the waste. Different disposal pathways are then considered. Combustion, with the possibility of energetic valorization seems the best answer for a major part of these wastes. But this is only possible if good combustion conditions are defined, so that no harmful products are emitted. Moreover, these conditions must be affordable on the technical and economical point of view. Then, some wastes cannot be burned in such a simple way, and need a larger approach, which is presented in this document.
S Mouras, G Labat, G Deroubaix
Preliminary study of the fungicidal and structural variability in copper naphthenates and naphthenic acids
1996 - IRG/WP 96-30114
Copper naphthenates, an oil-borne wood preservative listed by the American Wood-Preservers' Association (AWPA), is manufactured by complexing copper(II) with naphthenic acids. Prior to AWPA listing as a wood preservative, field experiments showed that copper naphthenates generally had good stability and were active against wood-destroying organisms. Recently, however, there have been reports of some copper naphthenate-treated poles rapidly failing. One possible explanation for the varying effectiveness could be that the structure, and resulting biological activity, of the naphthenic acids used to make copper naphthenate may vary. To test this hypothesis several naphthenic acids and copper naphenates were obtained and their fungicidal activity against three wood-destroying fungi measured. In addition, the chemical structure of the naphthenic acids were examined by proton- and carbon- NMR. Different activities were observed, especially against a copper-tolerant fungus. Some apparent correlations were seen between the fungicidal activity and chemical structures for the few samples studied.
T Schultz, D D Nicholas, L L Ingram Jr, T H Fisher
Improvements of monitoring the effects of soil organisms on wood in fungal cellar tests
1996 - IRG/WP 96-20093
Accelerated testing the durability of preservative treated timber in a so called "fungal cellar" or "soil-bed" to evaluate its performance in ground contact is widespread practice. In order to obtain a more accurate and reproducible estimate of preservative performance, several institutes, among them the BAM in Berlin, have routinely carried out static bending tests in addition to visual examination. These tests were usually performed with a defined maximum load or deflection path regardless of the remaining degree of elasticity of the test specimens. Recent studies at the BAM revealed that by modifying the method, i.e. by restricting the applied load to the non-destructive interval for each individual test specimen, the calculated modulus of elasticity (MOE) reflect the changing strength properties caused by biological deterioration and allow within a relatively short time valuable predictions on the service life of the treated timber in soil contact.
I Stephan, S Göller, D Rudolph
Comparison between actual income and expenditure and the budget for 1995
1996 - IRG/WP 96-60064
Japan's comments on ISO/DIS 12583-1/2
1996 - IRG/WP 96-20100
The paper describes an accelerated field test for the evaluation of timber preservative formulations against subterranean termites. The method has been adopted by the South African wood preservation industry as a screening method for the approval of wood preservatives for use under SA conditions. The method which is based upon the fungal cellar test offers a rapid means of evaluating the comparative performance of new wood preservative formulations in an environment that accurately reflects field conditions.
P Turner, D Conradie
Report of Section 2 1996
1996 - IRG/WP 96-20102
Programme section 5, Environmental aspects
1996 - IRG/WP 96-50077
Budget for 1997
1996 - IRG/WP 96-60075
Antagonistic effects of a range of fungi to Serpula lacrymans
1996 - IRG/WP 96-10156
Certain fungi have been demonstrated to exhibit antagonism towards Serpula lacrymans in culture. Species from the genera Trichoderma, Gliocladium, Penicillium and Hypomyces were among those exhibiting the strongest antagonism. Certain species showed antagonism in a range of media of varying nutritional status. The possible role of antagonistic fungi as biocontrol agents for Serpula lacrymans is discussed.
P Rattray, G McGill, D D Clarke
Effects of acetylation on the dimensional stability and decay resistance of kenaf (Hibiscus cannabinus L.) fiberboard
1996 - IRG/WP 96-40059
The objective of this study was to investigate the influence of the acetylation treated kenaf fiber, Phenol formaldehyde resin content level, and three fungi species on the dimensional stability and decay resistance of high density non wood composition boards. A standard ASTM method was used to evaluate weight loss and thickness change. The linear shrinkage and expansion of each species were also determined. All specimens were exposed to decay chambers for 16 weeks. Test results indicated that most of the main factors significantly influence the thickness, length changes, and decay resistance of the high density kenaf fiberboards.
P Chow, T Harp, R Meimban, J A Youngquist, R M Rowell
International collaborative laboratory comparison of two wood preservatives against subterranean termites: Third update and first report
1996 - IRG/WP 96-10174
At the 24th annual meeting of IRG in Orlando, USA, in May 1993 an international subterranean termite laboratory bioassay to compare the various preferred termite protocols used by IRG termitologists was initiated. The author was nominated to co-ordinate this comparative laboratory evaluation of two wood preservatives, copper-chrome-arsenic (CCA) and copper naphthenate (Cu-Na) against the subterranean termites used as test termites in Australia, France, Japan, Thailand, United Kingdom and the Unites States of America. Solutions of these two wood preservatives were prepared and impregnated into Pinus radiata wood blocks to obtain loading of 0.0, 0.5, 1.0, 2.0 and 4.0 kg/m³ respectively. All preservative treatments were carried out at the Division of Forestry and Forest Products in Melbourne. The treated specimens were dispatched to the participating researchers who subjected these specimens to attack by their test termite species, and have now returned the specimens to Melbourne. This paper reports the amount of wood consumed and the mean mass loss (%) on both treated and untreated wood blocks by the termites in the various laboratory bioassays.
J R J French
In-ground performance of two formulations of chlorothalonil after five years of exposure at three test sites in Australia
1996 - IRG/WP 96-30101
Sapwood specimens of Pinus radiata D. Don and Eucalyptus regnans F. Muell. were each treated to three retentions of each of two preservative formulations (chlorothalonil in oil; chlorothalonil plus chlorpyrifos in oil) and installed in-ground at three field test sites in Australia. Specimens were treated with each formulation to achieve 3.2, 6.4 and 12.8 kg/m³ of chlorothalonil a.i. and 3.2 + 0.2, 6.4 + 0.4 and 12.8 + 0.8 kg/m³ of chlorothalonil plus chlorpyrifos a.i. For comparison, specimens of each timber species, treated to a commercial in-ground retention of a copper-chromium-arsenic (CCA) formulation, were also installed. Treated specimens (including controls) have been rated for their condition annually for attack by subterranean termites and fungal decay using a scale ranging from 4 (sound) down to 0 (failed). After five years of exposure, mean termite and decay scores for replicate test specimens at each site reveal that the performance of all three retentions of each formulation, particularly the two highest retentions, is comparable to CCA.
J W Creffield, T L Woods, N Chew
Selective adsorption of antisapstain actives from two aqueous suspensions, and movement of actives into wood
1996 - IRG/WP 96-30103
Green-off-saw rough sawn Pinus elliottii (slash pine) boards were dipped in aqueous suspensions of two antisapstain formulations, NeXgenâ and Busanâ Sap Stain Preventative (Busan 1009), at three product concentration levels. Concentrations of active ingredients (NeXgen: CTL (chloro-thalonil) and MTC (methylene bisthiocyanate); Busan 1009: TCMTB (2(thiocyanomethylthio)-benzothiazole) and MTC) were monitored with respect to the amount of material dipped. Selective adsorption (removal of actives from the suspension at greater than simple volumetric transfer rates) varied with formulation and active ingredient, and increased with decreasing product concentration. Movement of active ingredients into dipped boards was monitored for 30 days after dipping. Mobility order was MTC >> TCMTB > CTL. Surface depletion characteristics were obtained for each active ingredient.
M J Kennedy, T L Woods
Effectiveness and synergistic effects between copper and polymer betaine
1996 - IRG/WP 96-30097
Different formulations of "Copper Amine" and Polymer Betaine were studied. During laboratory tests a synergism between both active ingredients against soft rot and dry rot has been found. The efficacy against soft rot according to the "BAM method" and the European Standard ENV 807 depends only on the amount of copper. Long term tests in a fungus cellar for determining the relative protective effectiveness in ground contact show similar results as CCA-treated wood.
H Härtner, V Barth
Annual report 1995
1996 - IRG/WP 96-60063
Abstracts of some papers promised for IRG 27
1996 - IRG/WP 96-60062
An effective preservative treatment of borak bamboo (Bambusa balcoona Roxb.)
1996 - IRG/WP 96-40070
Adequate penetration and retention of CCA and CCB has been obtained in predried Borak Bamboo (Bambusa balcooa Roxb.), aboundantly grown in Bangladesh, with Full Cell Pressure Process. The treated bamboo can be used as building materials, the sufficient treatability ensured its long term best utilization at ground contact and indoors. Which will keep the environmental & socio economical conditions of Bangladesh more viable and normal.
A K Lahiry, S Begum, G N M Ilias, M A Matin Sheikh, M A B Fakir, M I Hossain
Laboratory culturing and decay testing with Physisporinus vitreus and Donkioporia expansa orginating from identical cooling tower environments show major differences
1996 - IRG/WP 96-10184
Both Basidiomycete fungi Physisporinus vitreus (Pers.:Fr.) P. Karst. and Donkioporia expansa (Desm.) Kotl. & Pouz. were isolated from identical cooling tower environments. Azobé heartwood (Lophira alata), a very durable tropical wood species was totally deteriorated in cooling towers in a similar way by both fungi. First attempts to culture Physisporinus vitreus in laboratory circumstances showed a need for climatic conditions with higher temperatures and higher relative humidity compared to standard conditions known for most Basidiomycete fungi. Moreover there is a supplementary need to alter the acidity of the malt-agar medium and to add a protein nitrogen source like pepton. Identical culturing conditions were supposed for the Donkioporia expansa isolate. However the alteration in acidity is not beneficial for the growth of this cooling tower fungus. High mass loss figures up to 50% were recorded for non-durable wood species inducing wood moisture contents of over 150%, but only a slight growth stimulation on azobé could be observed under laboratory conditions.
J Van Acker, M Stevens
Marine borers as wood degraders in Bangladesh and their protection
1996 - IRG/WP 96-10186
Field study on timber piles used in Bangladeshi brackish waters revealed that untreated and pentachlorophenol treated piles drastically degraded by the attack of molluscs and pholads (marine borers). Adequately CCA-C impregnated (30 kg/m³ or 6% W/W dry oxide retention) timber piles can protect the attack of molluscs. It is very difficult to protect pholads which can invade naturally very durable timbers. Adequately preservative treated piles can be protected from pholads by hardening the initial surfaces by noncorrosive metal plates or by cement. Use of only dense and hard timber species would be a solution.
A K Lahiry
Localization of oxalate decarboxylase in the brown-rot fungus Postia placenta
1996 - IRG/WP 96-10161
Oxalate decarboxylase, the enzyme that breaks oxalic acid down into formic acid and carbon dioxide, was recently detected in mycelial extracts of the brown-rot fungus Postia placenta. Differential centrifugation was used to demonstrate that the enzyme is loosely associated with the hyphal surface. Enzyme activity can be removed by washing the hyphae with a low pH buffer. Only low levels of activity were detected in soluble and membrane-bound intracellular fractions. The presence of the enzyme on the hyphal surface and possibly in the hyphal sheath supports the hypothesis that this brown-rot fungus actively regulates the pH and oxalic acid concentration of its environment.
J A Micales
Seasonal effects of the field evaluation on wood preservatives against mold fungi
1996 - IRG/WP 96-20087
For the purpose of the amelioration of field test methods, commercial preservatives against mold fungi were tested under two different seasons, in winter and in summer. The specimens were bundled and set over the water bath and all these systems were covered with plastic film. At top of the system under film, black films for regeneration of sunlight were put in, and windows for changing air were reserved in summer. The visual evaluation of damage (rating 0-4) was done periodically. The results obtained as follows. 1.) The evaluation values after 2 months in winter were simmilar results as those after 3 weeks in summer. 2.) The fungicides, mixture of nitoril compound and organo nitrogen sulfuric compound, mixture of thiocyanate compound and organo nitrogen sulfuric compound, were obtained good results in field. Those percentage of the specimens rating under 1 were more than 50% and those mean rating were not more than 2. 3.) In the case of organo iodide compound, the results in winter were good but in summer were not so good.
K Suzuki, Y Sugai, K Ryugo, D Watanabe
Proposed degradation pathway for quaternary ammonium compounds by mould fungi
1996 - IRG/WP 96-10166
One group of chemicals that has attracted considerable attention as potential wood preservatives are the quaternary ammonium compounds (QACs). Based upon results of previous research this study confirmed the degradation pathway employed in QAC-tolerant fungi. For this experiment the two dialkylammonium compounds didecyldimethylammonnium chloride and dioctyldimethylammonium chloride were used. QAC-treated wood blocks were inoculated with the tolerant fungi Gliocladium roseum and Verticillium bulbillosum. After incubation the remaining QACs were extracted with acidified acetonitrilic and HPLC was used to quantify and detect the degradation products.
J L Bürgel, J Dubois, J N R Ruddick
Report of Section 1 1996
1996 - IRG/WP 96-10187