Your search resulted in 916 documents. Displaying 25 entries per page.
Improvement and practical application of dry-type pressure treatment method
2025 - IRG/WP 25-20734
In years, the need for environmental consideration has been reaffirmed worldwide, and in Japan too, there is a demand for the expansion of the uses of wood in order to achieve a decarbonised society. So, there is also a need to develop and improve wood preservation treatment methods that overcome the weaknesses of wood and enable it to be used in a wide range of applications. The authors have impr...
D Tezuka, C Igarashi
Enhancing the Fire Resistance of Spruce Wood through Treatment and Additive Application: Small Flame Test Method
2025 - IRG/WP 25-20737
Spruce panels treated by spraying with Burnblock® spray, were tested using “Small flame test method” according to EN ISO 11925-2:2011. The fire retardant product from Burnblock ApS is reported by the Danish company to be bioderived and non-toxic. The results for the untreated planed spruce showed moderate flammability whereas the Burn Block treated panels exhibited exceptional fire resistance...
E S Mujanic, R Hasanagic, E Kerzic, L Fathi, M Humar
Potential co-valorization of pyrolysis tars from five wood species form Tunisia as wood preservatives bases: Chemical compositions, antifungal and anti-termite activities
2025 - IRG/WP 25-20739
The pyrolysis of five Tunisian wood species (Ceratonia siliqua, Eucalyptus camaldulensis, Eucalyptus maidenii, Pinus pinea, and Quercus canariensis) was carried out in a custom-designed carbonisation reactor developed at the INRGREF's Wood Technology Section (Tunis, Tunisia). This process aimed to produce both char and pyrolysis by-products, particularly pyrolysis oils. The experiments were conduc...
M T Elaieb, J Valette, E Kiény, L Pignolet, S Ghariani, K Candelier
Citric acid/urea derivatives as an anti-discolouration treatment for wood surfaces
2025 - IRG/WP 25-20741
The exterior-use wood faces raining and sunlight exposure, which can cause property changes of the wood, such as the discolouration, dimensional instability, and biological attack. This article explores the use of citric acid and urea as surface protection of wood. The heating of citric acid and urea can result in the fluorescent carbon dots. These carbon dots can absorb UV light with the emission...
C-F Lin, O Myronycheva, D Jones, O Karlsson
CIOL Wood - Scientific Innovations in Wood Modification for Enhanced Performance and Usage
2025 - IRG/WP 25-20743
CIOL® is a wood modification technology designed as an environmentally friendly alternative to traditional wood preservatives. Utilising a biobased formulation based on sorbitol and citric acid, CIOL® enhances wood's chemical structure, improving its durability, stability, and resistance to decay. This paper provides an overview of the advancements made in CIOL® technology, including its improv...
E Larnøy, A Treu, M Diraison, M Smith, A Audouin, P T Lewandowski, J Biørnstad
Evaluation of 'Deep Penetration Treatment' for wood preservation
2025 - IRG/WP 25-20746
‘Deep Penetration Treatment’ (DPT) is a recently developed wood preservation technique in Japan designed to meet the preservation standards required for residential foundations. This method involves spraying a specially formulated solvent-borne wood preservative onto properly incised dried lumber. Despite being a non-pressure treatment, DPT achieves penetration levels comparable to conventiona...
M Ikeda, T Shigeyama, Y Sugai
Hot and cold treatment with ACQ
2025 - IRG/WP 25-20747
Wood deterioration poses a significant challenge in tropical and sub-tropical developing countries, leading to premature structural failure and economic losses. While preservative treatment offers a solution, the high cost of commercial vacuum pressure systems often hinders its widespread adoption. Lower-technology alternatives, like the hot and cold bath method, present a more affordable option f...
J Norton
Influence of incising methods and wood moisture content on ‘deep penetration treatment’ in Japanese cedar and larch
2025 - IRG/WP 25-20749
To expand applicability of ‘deep penetration treatment’, a solvent-borne and non-pressure treatment that is commonly coupled with roller-type incising using a flat blade, we investigated drill and laser machining as alternative incising methods and examined the influence of wood moisture content on the preservative penetration. Various incising methods were applied to heartwood of Japanese ced...
S Taira, T Miyauchi, S Isaji, H Matsunaga
The iTrussT project – Advancements in timber bridge design, preservation, and monitoring
2025 - IRG/WP 25-20751
The Norwegian research project iTrussT (2025–2028) aims to advance timber bridge design and unlock wood’s full potential as a sustainable solution for modern infrastructure. It addresses three critical challenges: First, fatigue testing of glued laminated timber lamellae will provide deeper insights into shear failure mechanisms, supporting the development of safer, more efficient structures a...
K-C Mahnert, U Hundhausen
Sustainable and environmentally friendly bio-based protection against fire
2025 - IRG/WP 25-20756
Flame-retardant agents are used to confer fire resistant properties with effects strongly dependent on their ability to form char during the thermal degradation. The char coats the polymeric materials and provides a good barrier against heat and oxygen diffusion, thus reducing the combustion rate of the polymeric materials. Halogenated agents that are used today are toxic and may cause severe heal...
M Tanase-Opedal, A Larsson, P O Flaete
Enhanced Termite Resistance of Low Durability Fast Growing Teak Wood by Non-Biocide Treatments Based on Chemical and Thermal Modification
2025 - IRG/WP 25-30818
Short rotation teak as a fast-growing tree can be considered as a renewable material resource for the future green economy. However, short rotation teak wood is susceptible to biodeterioration, particularly to termite attack. The objective of this work was to investigate the effect of chemical and thermal treatment on resistance of sapwood, transition wood, and heartwood of short rotation teak aga...
R Martha, K Candelier, M-F Thévenon, B George, I S Rahayu, W Darmawan, P Gérardin
Influence of plasma treatment on the coatability of wood primer with a topcoat for exterior use
2025 - IRG/WP 25-30828
The coatability of oil, or of solvent-borne alkyd resin wood primers with waterborne acrylic finish is the subject of much debate, but not much information can be found in the scientific literature on this topic. The aim of our study was therefore to evaluate the adhesion strength of the waterborne acrylic coating on oiled wood or wood with a solvent-based alkyd primer and to test the recoatabilit...
M Petrič, L Albreht, N B Štrus, E Keržič, M Pavlič, J Žigon, S Dahle
Enhancing strength, fire and biological resistance of wood through structural and chemical modification
2025 - IRG/WP 25-30831
Wood, a renewable and versatile biopolymer, has been a fundamental material to construct traditional and advanced composites for building construction, furniture, transparent composites, and various other applications. Despite its many advantages, including its aesthetic appeal, workability, and relatively low cost, wood possesses inherent limitations such as susceptibility to biological, flame an...
R Abouzeid, M S Koo, Q Wu
Enhancing Wood Greying: A Study of Pre-Treatments and Iron(II) Sulphate Application
2025 - IRG/WP 25-41018
Recent trends in architecture and environmental policies have increased the demand for natural, unprotected wood in outdoor applications. However, wood exposed to the elements tends to grey unevenly, which can be problematic for visually important applications like timber façades. One solution is artificial greying with iron ions, providing a uniform colour that later transitions to natural greyi...
B Lesar, M Humar, A Kordiš
Biocomposites based on fungal mycelium and beech particles impregnated with BPCM (bio-phase change material) for thermal energy storage
2025 - IRG/WP 25-41034
The building sector is a major contributor to Europe's carbon emissions, and transition to a bio-based economy is essential for achieving long-term sustainability goals. The European Union has set ambitious targets for climate-neutral heating and cooling by 2050, which requires the widespread adoption of energy-efficient and environmentally friendly technologies. A key element in this transition i...
E Nigrone, F De Francesco, J Conti, M Jebrane, M Nazari, N Terziev, S Palanti
Durability evaluation of outdoor-exposed CLT treated with various wood presevatives using CT scans
2025 - IRG/WP 25-41035
Methods for wood preservation treatment of large materials such as Cross Laminated Timber (CLT) are limited. It is unclear which wood preservation treatment methods can effectively protect CLT from rot risk. In this study, accelerated rot tests (fungus cellar test) of CLT treated with the solvent-borne wood preservative by non-pressure treatment, named ‘deep penetration treatment’, were conduc...
Y Sakurai, T Shigeyama, Y Sugai