IRG Documents Database and Compendium


Search and Download IRG Documents:



Between and , sort by


Displaying your search results

Your search resulted in 148 documents. Displaying 25 entries per page.


Rates of emission from CCA-treated wood in the marine environment: measurement, modelling and requirements for further research
2001 - IRG/WP 01-50166-12
Accurate estimates of rates of emission of leachate from preservative treated wood are crucial for realistic predictions of the environmental impact of its use in maritime construction. Estimates are available for some commonly used preservatives, but these vary widely. Though variable, these measurements suggest that emission generally decreases exponentially with time. Part of the variation is d...
S M Cragg, C J Brown, R A Albuquerque, R A Eaton


Biological performance of gypsum products containing borates
2000 - IRG/WP 00-30237
At suitable retentions borates have biostatic properties enabling them to be used for biodeterioration control in wood. They provide protection against decay fungi, mould, and termites, which are known to also attack gypsum products. Currently, many gypsum products contain added borates, which are used to improve physical and processing characteristics. Work examining the effect of borates at cont...
J L Fogel, J D Lloyd


Treatment of dried sawn spruce and redwood building timbers with water-borne preservatives under a scheme for the quality control of the preservation and preserved wood in the Netherlands
1978 - IRG/WP 3123
Treatment of dried sawn spruce and redwood Building Timbers with water-borne preservatives under a scheme for the quality control of the preservation and preserved wood in the Netherlands. The aim of this article is to give the reader a modest description of the evaluation of fundamental research in wood preservation into a practical application....
H F M Nijman, N Burgers


Results on termite resistance of building materials against Coptotermes formosanus by choice test
1998 - IRG/WP 98-10275
Various building materials, included wood species, wooden board materials, thermal insulation materials and fire-protection materials, were tested for grading of termite resistance against Coptotermes formosanus. The dimension of most specimens were 2x2x2cm3. Ten repeats were prepared. The specimens were put between Akamatsu sapwood control specimens on a laboratory cultured mound colony of termit...
K Suzuki, K Hagio


The influence of building design on wood decay
2000 - IRG/WP 00-10339
The cheapest and most effective way to prevent wood decay is to KEEP THE WOOD DRY! You and I know that, but we often forget and attempt a preservative solution to a problem better solved with good design and construction. It's also the answer to a frequently missed exam question in my Architecture class. Just as caulking is a poor substitute for proper design, so preservative treatment sh...
W W Wilcox


Work program of CEN/TC 38 (April 1993). Durability of wood and wood-based products
1993 - IRG/WP 93-20012
R Hüe


Experimental real building evaluation of termite attack - Effect of the space between the mat foundation and the thermal insulation
2000 - IRG/WP 00-10374
For evaluating the termite resistance of the real house foundation, specially in the case of thermal insulation systems for foundation walls, thermal insulation which can be attacked by termite, must be evaluate. Because of the difficulty of the water penetration of thermal insulation, the water barrier systems can be protected against termite attacks, in our opinions. The observation on the proce...
K Suzuki, K Hagio, Y Tanaka


Wood decay in Danish buildings
1985 - IRG/WP 1261
At Technological Institute identification of fungi and advisory activity concerning repair of damages has taken place since 1935. Statistical analyses based on material from 1982 and 1983 are compared to earlier investigations worked out by L. Harmsen. The material shows that building traditions influence the diversity and frequency of fungal species. Many fungal damages in the last decade have sh...
A P Koch


Reticulitermes (Ins., Isopt.) in Central and Western Europe
1969 - IRG/WP I 5A
Reticulitermes flavipes (Kollar) has established itself in Hamburg and Hallein coming from the east of North America. In France, on the northern boundary of termit occurrence, Reticulitermes santonensis are distinguished from Reticulitermes lucifugus by special activity and resistance. According to comparative investigations with colonies of several Reticulitermes species of different origins rega...
G Becker


Reticulitermes (Ins., Isopt.) in Mittel- und West-Europa
1969 - IRG/WP I 4
In Hamburg und Hallein hat sich Reticulitermes flavipes (Kollar) aus dem Osten von Nordamerika eingebürgert. An der Nordgrenze des Termitenvorkommens im Westen Frankreichs zeichnet sich Reticulitermes santonensis Fetaud gegenüber Reticulitermes lucifugus durch besondere Aktivität und Widerstandsfähigkeit aus. Nach vergleichenden Untersuchungen an Kolonien verschiedener Reticulitermes-Arten meh...
G Becker


The Biocidal Products Directive ( 98/8/EC ) - its consequences for the wood preservation industry
2001 - IRG/WP 01-50166-04
1. The Current Position This European Union Directive is one of the most technically complex pieces of legislation that has been developed by the European Commission (EC). Although the Directive was to have been implemented in the legislation of individual Member States of the EU by May 2000 progress has been slow. A number of Member States have yet to declare the Competent Authority who will handle their legislation. The body text of the Directive cannot stand-alone and is dependent on ancillary regulations and the development of technical guidance for both the Competent Authorities in the Member States and also industry to understand their roles in the whole process for the regulation of biocides and the biocidal products containing them. The process is far from complete in terms of a piece of workable legislation and this leaves not only industry but also the Competent Authorities with significant areas of uncertainty. This is potentially economically and socially damaging to the marketing and use of biocides and biocidal products. Because of this evolutionary process this paper can only be written in general terms as by the time the symposium takes place some significant changes to the position at the time of writing may have occurred. 2. Background The Biocidal Products Directive (98/8/EC), (BPD), is a directive which requires that biocides ( as active substances) are approved for use within the EU and the individual biocidal products containing these active substances are approved for use by the Competent Authority(s) of the Member State(s) in which it is intended to market the product. The product authorisation obtained in the first Member State should be mutually recognised by the other Member States in which application for authorisation to place the product on the market is sought. The Directive has to be seen in the context various other Directives, notably the Plant Protection Directive 91/414/EC). Biocidal products are grouped in the directive into twenty three "product types" and wood preservatives are Product Type 8. The intention of the directive is to harmonise the requirements for the placing of biocidal products and active ingredients on the market throughout the EU. EU wide use of so-called Common Principles are intended to be used to assess the dossiers in order to achieve a common approach and eliminate the current situation where individual Member States apply their own particular national approaches and criteria in the assessment and regulation of products . Annex IIA of the directive identifies the data requirements for the active substance and Annex II B for the biocidal product. There are additional data requirements identified in Annexes IIIA and IIIB for each product type reflecting potential for exposure to man and the environment. 3. Entry onto Annex I Any new active substance will require approval before it or any biocidal products including it can be placed on the market. The dossier to be submitted to the EC will have to include additional data and risk assessments for the product types (as defined in the BPD) in which it will be intended to be used. For those active substances that are accepted as being existing substances on the market before May 2000 (say in wood preservatives) these will be ranked and prioritised. This process is being defined in the so-called: Review Regulations. 4. An environmental directive There is no doubt that this Directive has a high environmental content in terms of the data and the associated risk assessments which are to be prepared. The protocols and the end points for some of these data requirements are still being developed. In general the EC considers that modelling exposure using human and environmental exposure scenarios covering the end use of the product is an acceptable approach . Data are required to enable these scenarios to be modelled and risk assessments made. It is necessary that regulators do not make decisions based on hazard assessment alone in the absence of fully worked out and agreed emission scenarios to define exposure levels which generate a realistic worst case risk assessment. Risk is a function of both hazard and exposure. A lot of work has been done in the development of Technical Notes for Guidance intended to help the regulator and the applicant in the submission and the interpretation of the data. Whilst it may be the case that the human toxicity data requirements still leave questions to be answered it is in the environmental aspects part of the regulatory process where there is still much work to be done. The Directive would seem to rely heavily on the development of Pass / Fail criteria in simulation tests. This is a big subject and of key importance to the risk assessment. 5. Wood preservatives ---- a test case Wood preservation has achieved a certain reputation. On the one hand it is said that a prime reason for the development of the Biocidal Products Directive arose from European problems in the regulation of the marketing and use of dangerous substances, notably wood preservatives. On the other hand because wood preservatives have been regulated by a number of Member States for many years it is believed they are well understood. The EC and the Member States also wanted to be seen to have achieved early success in the implementation of the Directive therefore the decision was taken to start, following failings with the speed of progress of the Plant Protection Products Directive, with a product type they knew all about i.e. wood preservatives. There is no doubt that there is a much greater understanding on the exposure scenarios, both human and environmental, for wood preservatives than many other product types. However, would it not have been better to have tackled some of the other product types where such an understanding is much less well developed? It is regrettable that the EC and Member States did not feel able to accept the results of an EC sponsored study (Haskoning report) on the assessment of risks for all the product types covered under the BPD. The results of this study clearly showed that wood preservatives did not constitute the most significant risk to man or the environment and in fact the risk was significantly greater for other product types. 6. Wood preservatives and the OECD Biocides Programme Another speaker will be covering this subject in more detail. Suffice it to say that because of the perception there was good knowledge about wood preservatives again they were selected as the pilot for an OECD project looking at environmental and human exposure assessment under the OECD Biocides Programme. The findings from two OECD Workshops actually demonstrated there was still much to be learnt about wood preservatives in order to refine the risk assessments to a state where they would be sufficient for the requirements of the BPD. This work is ongoing but it clearly demonstrates the problems that both the regulator and industry will have in the preparation and the assessment of the dossiers for both the active substances and the biocidal products. This is especially the case for other biocidal products that have not been subject to the same kind of regulation that wood preservatives have subjected to in the past. 7. Inorganic and organic biocides With current wood preservation technology there is still a dependence on inorganic chemicals such as copper (in conjunction with other biocides) or with chromium, as well as arsenic and boron for many end use applications. This is very much the case where a long term service life is a key factor in the use of treated wood for that end use. These substances are commodity chemicals and are also covered under the Existing Substances Regulations (EC) 1488/94. There is also work going on revising the Technical Notes for Guidance covering them . This includes a significant addition in the environmental risk assessment area. Efforts are being made to integrate and coordinate the requirements for both the BPD and the Existing Substances Regulations and OSPAR ( OSPAR Convention for the Protection of the Marine Environment of the North-East Atlantic). OSPAR refers to the Oslo Paris Convention. Whilst the BPD seems primarily aimed at the regulation of biocides based on organic chemicals wood preservative products may contain both inorganic and organic components. Indeed there are probably few wood preservative formulations on the market that contain only one active substance. This must have a significant impact on the way the dossiers are prepared for the active substance and the biocidal products and how they are assessed both at the EC and the Member State level. 8. Consequences of the BPD for the wood preservation industry Whilst this paper addresses the consequences for the wood preservation industry per se, it must not be overlooked that there may be implications for the fabricaÈors of articles made from treated timber. Some current wood preservative formulations may over a period of time be withdrawn from the market because the risks and costs of generating the data and the preparation of the dossier make the product economically unviable. The presence of large working volumes of wood preservative solutions at treatment plants requires realistic withdrawal periods to avoid the unnecessary disposal and associated environmental risk of products that have been used satisfactorily for many years. 9. Availability of active substances The structure of the industry has changed dramatically in the past few months and there is no doubt that other changes both within and outside the wood preservation industry itself are yet to happen. The original differentiation between formulator of wood preservatives and active substance suppliers to the wood preservation industry has become blurred. Some of the active substances used in wood preservation are used in other either other biocidal product types or in products regulated under another directive, e.g. Plant Protection Products Directive 91/414/EC. 10. Data protection This continues to be a key issue for industry and some companies may find it strategically or financially necessary not to support an active substance in a particular product type thus leaving that sector without being able to use the active substance. The coming months will start to reveal which active substances are likely to be supported, at least through the notification process. Formulators are therefore in a close dialogue with their suppliers to try to determine their intentions on whether or not they intend to support their active substance. Today's wood preservative formulations are largely multi active substance based. Product costs, efficacy spectra, niche marketing and other considerations have made this process inevitable. New wood preservative formulations take time to research and develop and the continuity of availability of a choice of active substances is of key importance. A lack of adequate return on investment necessary to sustain the development of new products could have a negative impact on innovation and the rate of introduction of new products. It is extremely unlikely that any new active substance will be solely developed for use in wood preservation. This would be an effect contrary to expectations of the EC. The situation with wood preservatives is complicated by the fact that treated wood is a construction product and comes under the scope of the Construction Products Directive (89/106/EEC) (CPD). Products under the scope of the CPD are required to meet certain so-called essential requirements and one of these is durability. Demonstration of compliance involves the extensive suite of CEN wood preservative efficacy tests. Even relatively small changes in formulations may require extensive re-testing under the EN 599 regime in some Member States. 11. Task Forces Companies are encouraged by the EC to enter into Task Forces in order to reduce the burden of testing on animals and also to reduce the number of dossiers to be reviewed for each active substance. Ideally, and understandably, the EC would like one dossier per active substance. Parts of the wood preservation industry have been co-operating in Task Forces and much practical experience has been gained. Even closer co-operation will be required and this will enable companies to pool experience and expertise and manage their financial exposure to potentially high regulatory costs by sharing them amongst a larger number of parties. 12. Financial aspects Industry will have to make some best guesses with respect to its investment programmes for supporting its portfolio of products. Formulators and active substance suppliers are likely to group into Task Forces in order to reduce their costs in terms of data generation and the fees likely to be charged at the EU and the Member State level for the assessment of the dossiers. The compilation of the dossiers requires specialist expertise to assist the industrial applicant(s). This is likely to cost in the order of £100,000 per active substance, not including the costs of generating any data. The Rapporteur State's costs for reviewing the dossier is also expected to be of the same order. Clearly these kinds of costs will impact on innovation. An adequate payback must be available to the company to justify this level of investment. 13. Will mutual recognition work? Member States are required to recognise the authorisation of the biocidal product placed on the market in the first Member State when subsequent applications are made to place the product on the market. This is a fundamental principle of the BPD, although there is concern that Member States continue to have enough flexibility to prevent this happening if there are particular concerns in that Member State. Industry very much hopes this will not be the case and that mutual recognition, a fundamental principle of the BPD, will work in practice. 14. Environmental aspects Biocidal products such as wood preservatives are generally applied in controlled situations and not over large areas. Consequently any emissions can be considered to be from discreet sources, such as treated timber or potentially from timber treatment plants. This is in contrast to plant protection products and some other biocidal products that are usually dispersed over a relatively large area. Because of this a lot of work is required to be done to re evaluate how the environmental aspects of biocidal products such as wood preservatives can be assessed in an objective manner. The criteria that define an emission and how the PEC (Predicted Environmental Concentration) for each environmental compartment is determined are critical. The wood preservation industry, through the EWPM (European Wood Preservative Manufacturers Group), has been working with institutes and other interested parties in a co-operation known as the EFG (Environment Focus Group) to progress the development of appropriate methodology. Data will be required for both primary and secondary exposure to treated timber. The protocols for this work are yet to be agreed. This work is being further progressed in the OECD together with input from CEN TC 38 WG27. This co-operation between the OECD and CEN is extremely significant in that it is, I believe, the first time such a co-operation has taken place in the development of an OECD Guideline. If one considers all of the end uses where treated timber may be found carrying out a risk assessment with few guidelines on how it should be done is a very uncertain process for both industry and the regulator. Reliance on so-called expert opinion may be inadequate. 15. Comparative assessment (the substitution principle) This is a process whereby the health safety and environmental properties of acti_u101 ? substances used in the same product type could be compared and those with the most undesirable properties would not be placed on Annex I. Consequently biocidal products containing them would have to be removed from the market. This process is embodied in the BPD but it was initially considered that it would only be applied in the event of problems arising with active substances or products containing them rather than being used as a screening tool early on in the review process for active substances. This area is still an uncertain one with Member States having different interpretations of this principle. It is unfortunate that the wood preservation industry could be used to test out this concept at a European level. The consequences of this principle could be further losses of active substances available to the wood preservative formulators. 16. Substances of concern The BPD is not only concerned with the active substances that are formulated into the biocidal product but also with so-called "substances of concern". These are defined as any substance, other than the active substance, which has the inherent capacity to cause an adverse effect on humans, animals or the environment and is present or is produced in a biocidal product in sufficient concentration to create such an effect. There are significant implications for the formulator of the biocidal product . The formulator may have to submit an extensive dossier containing toxicological and metabolic as well as ecological data on each of the substances of concern when seeking approval for the biocidal product. There may be classes of compounds that become unavailable to the formulator either because of the risks posed by the co-formulant or because the cost of generating data will be uneconomic. 17. The wood preservation Industry's view on the BPD Industry has supported the development of the BPD since its conception in 1989. It is still supportive it but believes that the degree of complexity is disproportionate to the level of risk when it comes to wood preservatives. After all wood preservatives have been regulated for a long time and in reality there have been few significant health safety and environmental problems associated with them. Industry believes there is no need to determine an absolute understanding about a biocide and its application but rather there is a need to determine the level of understanding that will enable characterisation so that a risk assessment can be made. The wood preservation industry has sought either directly or through representative bodies a pro-active and collaborative approach with the regulators although at times this appears to have encouraged inappropriate demands. The regulators have invariably responded positively to this however they may not always understand the burden in both time and resource in having made wood preservatives the test case. Industry hopes that its efforts to be pro-active will be recognised and will be dealt with equitably when considered before the other product types defined in the Biocidal Products Directive.
D Aston


Japanese Classification of Wooden Building Members for ISO Use Classes according to the Building Code in Japan.
2006 - IRG/WP 06-20337
Because of the international approve of use class system for the biological degradation of wood by ISO/DIS 21887 and ISO/DIS 21892, Japanese committee of ISO/TC165/SC1 asked to the JWPA for classify the wooden commodities by use class of these draft ISO. The JWPA was prepared a draft use class model in Japan. Japanese building code systems are described and Japanese draft use class system is also ...
K Suzuki


Building With Wood an strategic action in Spain
2010 - IRG/WP 10-40530
This paper explains the objectives and results of the “Building with Wood” project, mainly at Spanish level. As far as the wood preservation field is concerned, the present abstract also informs about the main goals of the project in this matter....
M Conde García, J I Fernández-Golfín Seco, J Galván Rodríguez


Timber Preservation and Sustainable Construction in Australia
2005 - IRG/WP 05-50224-14
Sustainable development has been described as meeting the needs of the present without compromising the ability of future generations to meeting their own needs. (Bruntland 1987) To achieve the sustainable development goal therefore, the maximum performance has to be obtained from existing resources (timber) so that the remaining resource is protected from over-exploitation. Clearly, wood preserva...
J Norton


Termite barriers for new construction
2000 - IRG/WP 00-10341
Subterranean termite protection in Australia has traditionally relied upon the creation of a zone of poisoned soil under and around the structure to prevent termite attack from the ground. The transition away from persistent soil poisons which began with the withdrawal of cyclodienes in 1995 provided market opportunities for innovative barrier systems. The new barrier systems currently being used ...
D M Ewart


Statistically stable models for determination of PEC
1999 - IRG/WP 99-50135
In June 1998 the European Wood Preservative Manufacturer's Group prepared a document to support the Technical Guidance concerning the placing of products on the market with respect to the Directive 98/08/EC (BPD). The essentials of this document were presented at the COST E2 meeting in Cannes last year and at the following IRG conference (Baines and Davis, 1998; IRG/WP/98-50101/20). The d...
W J Homan, A L Van Oosten Van


Disposal of Pressure Treated Wood in Construction and Demolition Debris Landfill
2005 - IRG/WP 05-50235
Pressure treated wood is often disposed in landfills in the US, very frequently in construction and demolition (C&D) debris landfills. C&D debris disposal facilities in many states are not equipped with liner systems to protect underlying groundwater. In this paper, issues associated with the disposal of metal-containing treated wood in C&D debris landfills are discussed. C&D de...
T G Townsend, B Dubey, J Jambeck, H M Solo-Gabriele


Development on Damage Functions of Wood Decay for Building Envelope Design
2005 - IRG/WP 05-10556
For the hygrothermal analyses of building envelope systems for insulation design, we tried a natural decay test of wetted wood specimens without any inoculation of fungi. Three principal experimental types: under steady-state conditions (Experiment A), at a cyclic water dripping under Non-steady conditions (Experiment B) and at a cyclic water dipping under-steady conditions (Experiment C), were ca...
H Suzuki, Y Kitadani, K Suzuki, A Iwamae, H Nagai


The dip diffusion treatment of tropical building timbers in Papua New Guinea
1972 - IRG/WP 310
In Papua New Guinea a dip diffusion process using a multi salt preservative developed by C.S.I.R.0. has been in commercial use for 8 years. Over 200 million super feet (236,000 m³ ) of timber has been treated during this period and current rate of treatment is 34 million super feet (80,400 m³ ) of timber per year in 70 licenced treatment plants. The process has been found to be simple to apply, ...
C R Levy, S J Colwell, K A Garbutt


Data requirements for wood preservatives in the EU Biocides Directive
2001 - IRG/WP 01-50166-08
Directive 98/8/EC of the European Parliament and of the Council concerning the placing of biocidal products (the Biocidal Products Directive, BPD) lays down the requirements on data needed for authorisation of a biocidal product and approval of its active substance(s). The dossier must contain data needed for the proper risk assessment of the biocidal product. A detailed technical guidance documen...
H Braunschweiler


Review of Mold Issues in North America and Mold Research at Forintek
2003 - IRG/WP 03-10458
Over the last decade, air quality in homes and workplaces has become a high profile issue especially in relation to mold, receiving considerable media, public and legal attention. Forintek Canada Corp. and the wood industry in general have experienced large increases in inquiries regarding mold and the suitability of wood as substrate for its growth. Because wet wood supports growth of fungi the ...
A Uzunovic, A Byrne, Dian-Qing Yang, P I Morris


International standards and the biocide debate - Potential contribution
2000 - IRG/WP 00-20196
Downstream the European 98/8/EEC directive on biocides, a working party of O.E.C.D. has been developing a tremendous work to put together the background information necessary to assess wood preservative efficacy, environmental and human exposure. Standardization may contribute to those efforts, using traditional experience and methodology. Among them, the hazard classification system may be extend...
G Ozanne


Environmental risk assessment of treated timber in service: The Environment Focus Group approach
2000 - IRG/WP 00-50162
In the context of the Biocidal Products Directive (98/8/EC), and of the OECD work on wood preservatives, the Environment Focus Group (EFG), comprising 8 institutes and the European Wood Preservative Manufacturers Group, has been working on the environmental risk assessment of treated timber in service. A literature review of emissions from treated timber has revealed that very little existing data...
G Deroubaix, G Labat, I Le Bayon, S Legay, P Marchal, C Yrieix, E Melcher, R-D Peek, S De Geyter, J Van Acker, W J Homan, D J Dickinson, R J Murphy, E D Suttie, A J Nurmi, A-C Ritschkoff, D Rudolph, I Stephan, D Aston, E F Baines, J B Simonin


Leaching of Arsenic from Mulch Made from Recycled Construction and Demolition Wood
2005 - IRG/WP 05-50232
Mulch made from recycled construction and demolition (C&D) wood has been reported to contain chromated copper arsenate (CCA)-treated wood and potentially release arsenic in the leachate by rainfall. Such recycled wood mulch is commonly masked with iron-oxide colorant, which is known to combine with arsenic. The objective of this study was to evaluate the levels of arsenic leaching from C&...
T Shibata, H M Solo-Gabriele, T G Townsend, B Dubey


The new National Directive on wood preservation in the Netherlands
1998 - IRG/WP 98-50101-03
In the Netherlands the major part of treated timber is sold under the KOMO-certificate. The National Directive for vacuum pressure treated timber on which certification is based, is currently being revised. The new National Directive will contain a code of good practice including maximum leaching figures. It incorporates quality requirements for treated timber, existing legislative requirements an...
W J Homan, J K B Kwisthout, J Dubelaar


Previous Page | Next Page