IRG Documents Database and Compendium

Search and Download IRG Documents:

Between and , sort by

Displaying your search results

Your search resulted in 142 documents. Displaying 25 entries per page.

Glued laminated poles - Progress report after 30 years testing
2010 - IRG/WP 10-20427
In 1979 a number of glued laminated poles treated with CCA and creosote were placed in a greenhouse at Uppsala, at the Simlångsdalen test field in southern Sweden and in a power lane in Vuollerim in northern Sweden in order to study their resistance against biological degradation. The tests have shown that the best performance will be obtained if each lamination is treated with a water-borne preservative (only CCA was used in this test) and thereafter the laminated pole is treated with creosote. After 30 years’ exposure, all the creosoted poles in Simlångsdalen and Vuollerim showed only slight decay (grading 1) in the sapwood on surfaces with gluelines. In the outer laminations the decay grading was 2-3 in the heartwood and 1-2 in the sapwood.
Ö Bergman, J Jermer

Performance superiority of CCA-C treated wooden jetty poles and piles used for 30 years in Bangladesh against marine borers
2012 - IRG/WP 12-30582
Observational study along with previous investigation and records revealed that chromated copper arsenate type C (CCA-C) impregnated southern pine poles and piles of jetty constructed in most vulnerable brackish water in Bangladesh are stable and resistant to attack of all types of marine borers after 30 years of use. It is evident from the service records of other construction materials that CCA-C treated wood poles and piles treated at retention level of 20 kg/m3 dry oxides in an assay zone of 12mm to 50mm are significantly more safe and superior material in brackish water rather than marine construction made of untreated wood, leachable type of preservative (e.g., pentachlorophenol) treated wood, brick, rock, and even concrete of any type.
A K Lahiry

Effectiveness of CCA-C and CCB preservatives after a 30 years stake test
2012 - IRG/WP 12-30606
The objective of this experiment was to assess the durability of four pine species treated with waterborne preservatives. In order to determinate this, a stake field test, following the IUFRO (International Union of Forestry Research Organizations) recommendations, was installed at Experimental Station of Luiz Antonio (21º 32’ S and 47º 42’ W), State of São Paulo, Brazil. Species under test were Slash Pine (Pinus elliottii var elliottii), Caribbean Pine (Pinus caribaea var hondurensis), Oocarpa Pine (Pinus oocarpa) and Benguet Pine (Pinus kesiya), as untreated (witness) as well treated with the preservatives CCA type C and CCB, in five retention levels (from 4.3 to 10.4 kg/m³). These materials were inspected to evaluate the degree of attack by fungi and termites; after 8, 21 and 30 years of exposure. The results were plotted as decay index over time for all conditions (wood species and retention levels) in order to determine the mean service lives. Differences observed among preservatives, retentions and wood species are discussed, demonstrating as main conclusions: a) the decay index presented a direct relationship to the level of retention for the stakes treated with CCA-C; b) the lowest decay index (longer durability expectation) correspond to treatments with CCA-C in retentions above 8.0 kg/m³; c) the CCB preservative showed a lower performance comparing to the CCA-C preservative.
I PJankowsky, E S Lepage, C Salvela, J M Vidal, S Takeshita

A comparison of soft rot, white rot and brown rot in CCA, CCP, CCF, CCB, TCMTB and benzalkonium chloride treated Pinus radiata IUFRO stakes, after 9-15 years exposure at five test sites in New Zealand
1991 - IRG/WP 1485
The aim of this study was to determine if decay type varies significantly between five field trial test sites of different soil type, aspect and climate in 9-15 year old, replicate CCA, CCF, CCP. CCB, TCMTB and AAC treated IUFRO stakes. A visual on-site assessment of decay type on every test stake was made and observations confirmed by microscopical examination. Regression analyses were used to determine significant differences of percentage frequency of occurrence of each rot type between sites and preservatives. Large differences in percentage frequency of occurrence of rot type were evident between sites. One site was dominated by brown rot (85%) and two were dominated by soft rot (99 and 91%). The fourth site had intermediate proportions of brown rot (40%) and soft rot (71%) but had the second highest occurrence of white rot (32%) (highest = 37%; lowest = 11%). The fifth site was distinct in that a large proportion of stakes (69%) had both well established brown rot and soft rot. Stakes at the other four sites tended to have only one rot type. Some highly significant preservative effects were also found. Possible causes of these differences are discussed in terms of inter-site soil type, climate and other differences.
R N Wakeling

JWPA method for testing effectiveness of surface coatings with preservatives against decay fungi
1981 - IRG/WP 2164
In 1979 JWPA established a new method for testing effectiveness of surface coatings in accordance with practical use of preservative-treated lumber. Comparing the new testing method with JIS A 9302, a few new trials - size of wood specimen, weathering procedure, and decay-test procedure - are incorporated.
K Tsunoda

Performance of treated fence posts after 6 years in five test plots in the State of Sao Paulo - Brazil
1976 - IRG/WP 376
Fence posts treated with creosote, pentachlorophenol and creosote/ pentachlorophenol mixtures showed good performance after 6 years of exposure in five test plots located in the State of Sao Paulo - Brazil. Good results were also achieved with copper sulphate/sodium arsenate and copper sulphate/potassium dichromate mixtures. Fungi and termites were the main destroying agents found attacking the posts.
M S Cavalcante

Inspection results of preservative treated stakes, maximum 33 years in field
1992 - IRG/WP 92-3690
Since in 1958, we have undertaken field experiments in Japan. For these field experiments, we used sapwoods of Japanese cedar called Sugi (Cryptomeria japonica) because of majority of plantation forest soft wood species in Japan. For some preservatives, we added sapwood of Japanese beech called Buna (Fagus crenata), a main Japanese hard wood species. Dimensions of these specimens were 30 x 30 x 600 mm³ (T x R x L). About 30 preservatives mainly water born but 20% of oil born preservatives included, were examined for this test. We checked the damage rating every year by the observation. The service life of the preservative treated stakes were estimated at the period when the average damage rating of stakes were reached beyond 2.5 . Creosote oil, creosote oil mixed heavy oil (75:25 and 50:50) and creosote oil mixed coal tar (75:25 and 50:50) are still sound conditions for 33 years. CCA (JIS K 1554 Type 1) 2% and Tancas C 2% are still sound conditions for 28 years. Because of soft rot, the treated Buna specimens were shorten as ones of treated Sugi.
K Suzuki, K Yamamoto, M Inoue, S Matsuoka

Fungicidal combination products
1987 - IRG/WP 3426
Due to the increased pressure on some of the established fungicides used in wood preservation, possible alternative products become more interesting. The requirements for new chemicals are mainly lower toxicity and greater environmental acceptability. However the efficacy to target organisms should be as good as that of the currently used ones, preferably better. A possibility for progress in this direction could be fungicidal combination products showing broader spectrum of efficacy and synergistic effects. Mixtures of tributyltin compounds with Furmecyclox and K-HDO respectively are tested for this purpose. Toxic values with and without artificial ageing (wind-tunnel exposure and leaching) were determined. Investigations have been made with coating-formulations in order to test penetration, evaporation and the influence of UV-radiation. Aqueous formulations were tested for special purposes such as the treatment of freshly cut timber and the protection of brickwork. The results obtained are very promising, especially regarding long term durability. Further investigations mainly with the aqueous formulations including other test fungi and field trials are necessary to confirm the suggested application as wood preservatives.
H A B Landsiedel

The leaching of copper, chrome and arsenate from CCA-impregnated poles stored for ten years in running water
1978 - IRG/WP 3122
There is no evidence to indicate that the chromium and copper components are leached from the outermost 5 mm of sapwood in poles impregnated with Boliden K33 and Tanalith C and stored in running water for ten years. The arsenic component, however, seems to be leached out during the first few months to an extent of about 20% of the initial amount. The leaching time is dependent on the preservative used.
F G Evans

Evaluation of the effectiveness of three microbiocides in the control of sapstains
1982 - IRG/WP 3212
Results of field test on the effectiveness of BUSAN 30, CAPTAN, FOLPET against mould and sapstain in Pinus elliottii are presented. The viability of use of FOLPET in Brazil as an alternative to sodium pentachlorophenate is also discussed.
S Milano, J A A Vianna Neto

In-ground performance of two formulations of chlorothalonil after five years of exposure at three test sites in Australia
1996 - IRG/WP 96-30101
Sapwood specimens of Pinus radiata D. Don and Eucalyptus regnans F. Muell. were each treated to three retentions of each of two preservative formulations (chlorothalonil in oil; chlorothalonil plus chlorpyrifos in oil) and installed in-ground at three field test sites in Australia. Specimens were treated with each formulation to achieve 3.2, 6.4 and 12.8 kg/m³ of chlorothalonil a.i. and 3.2 + 0.2, 6.4 + 0.4 and 12.8 + 0.8 kg/m³ of chlorothalonil plus chlorpyrifos a.i. For comparison, specimens of each timber species, treated to a commercial in-ground retention of a copper-chromium-arsenic (CCA) formulation, were also installed. Treated specimens (including controls) have been rated for their condition annually for attack by subterranean termites and fungal decay using a scale ranging from 4 (sound) down to 0 (failed). After five years of exposure, mean termite and decay scores for replicate test specimens at each site reveal that the performance of all three retentions of each formulation, particularly the two highest retentions, is comparable to CCA.
J W Creffield, T L Woods, N Chew

Corrosion of fasteners in heat-treated wood – progress report after two years’ exposure outdoors
2005 - IRG/WP 05-40296
The corrosion of common fastener materials now in use - mild steel, zinc-coated steel, aluminium and Sanbond Z-coated steel – has been evaluated after two years’ exposure outdoors in untreated and heat-treated spruce (Picea abies) respectively. Spruce from South-western Sweden was used. The heat-treatment was carried out in Finland according to the ThermoWood process at a maximum temperature of 220 °C for five hours. The results so far show that the corrosion of fasteners in heat-treated wood according to the particular specification is more severe than in untreated wood. Mild steel and zinc-coated steel has been most susceptible. Stainless steel is hardly attacked at all.
J Jermer, B-L Andersson

An in-ground natural durability field test of Australian timbers and exotic reference species. Part 2: Progress report after approximately 13 years' exposure
1983 - IRG/WP 1189
The condition of heartwood specimens of Australian and exotic timber species after approximately 13 years' in-ground exposure is given. Four of the 5 test sites have a termite hazard in addition to the hazard from a range of decay fungi. Values for specimen life are given only where all replicates of a timber species have become unserviceable. Results give evidence leading to doubt about the accuracy of the tentative durability ratings previously ascribed to at least some of the species under test.
J D Thornton, G C Johnson, I W Saunders

Ecotoxicological risks of anti-sapstain preservatives washed off from treated timber
2000 - IRG/WP 00-50144
A field method for ecotoxicity assessment of rain water wash-off from anti-sapstain treated timber was developed. In the course of this study freshly sawn timber treated with 1.5% Busan 30 L (reference preservative) and a control stack with untreated pine were exposed to weathering. The run-off water was ecotoxicologically tested with organisms from three trophic levels (Vibrio fischeri, Kirchneriella subcapitata, Daphnia magna). Results show, that the highest ecotoxicity can be detected immediately after treatment and within the first 4 weeks of storage - depending on the precipitation: high rainfall during the first month of exposure significantly increases ecotoxicity. Covering the treated stack provides sufficient protection of timber against leaching of chemicals and further on significantly minimises the environmental risk. Results suggest either storage of anti-sapstain treated timber in saw mills underneath a roof or, when stored outside, protection of treated stacks by coverage.
G Aschacher, R Gründlinger

IRG 30 invitation
1999 -
IRG Secretariat

Fungus cellar and stake tests with tall oil derivatives. Progress Report after 5 years' testing
1987 - IRG/WP 3442
Two derivatives of tall oils have been tested for five years in fungus cellar and stake tests. The samples were relatively quickly attacked on the surface by decay fungi, mainly soft rot, but the decay has progressed very slowly. The performance of the stakes in the tests has so far been equivalent or even better than some CCA preservatives and creosote.
J Jermer, Ö Bergman, T Nilsson

Depletion of wood preservatives after four years' marine exposure in Mt. Maunganui harbour, NZ
1994 - IRG/WP 94-50036
This paper reports on chemical analysis of marine test samples exposed in Mt. Maunganui harbour, New Zealand from 1977 to 1981. Depletion data for a Class II CCA, a CCA-A formulation, acid copper chromate and ammoniacal copper arsenate are presented. The results suggest differences in the rate of loss of individual preservative components among the four formulations and redistribution of individual preservative components within the wood.
K J Archer, A F Preston, C M Chittenden, D R Page

Abstracts of some papers promised for IRG 30
1999 - IRG/WP 99-60113
IRG Secretariat

Co-operative Field Experiment: Performance of preservative-treated timber: Report on condition of specimens after seven years installed in New South Wales - Australia
1986 - IRG/WP 3362
R S Johnstone

Analysis of creosote posts after 40 years of exposure
1994 - IRG/WP 94-50035
In the early 1950s The Western European Institute for Wood Preservation (WEI) started a program for testing creosote and salt treated posts in three exposure sites in Europe. Of these only the site in Simlångsdalen in south western Sweden remains today. The purpose with this investigation was to demonstrate which creosote components are still retained in the posts after 40 years of exposure and which components have migrated or evaporated. Three posts, impregnated with three different creosotes, from the site in Simlångsdalen have been studied. The retention, composition and distribution of creosote in the posts have been determined and compared with data on the original creosote. After 40 years of exposure creosote loss is greatest in the post impregnated with creosote containing the highest fraction of low-boiling constituents. The loss is greatest in the top sections of all three posts. The concentrations of low-boiling compounds (b.p. < 270°C), e.g. naphthalene and 2-methylnaphthalene are very low. The residual creosotcs have the greatest percentage of high-boiling constituents (> 315°C), especially phenanthrene and anthracene (b.p. 340°C). The soil close to those posts which were "over-loaded" with creosote during the treatment process, contains increased concentrations primarily of the heavier components fluoranthene, pyrene and chrysene. The small number of posts analyzed limits the possibility to generalize the conclusions.
G Bergqvist, S Holmroos

Inorganic wood preservative levels in soil near a noise barrier treated with different preservatives after 8 years in service
2005 - IRG/WP 05-50234
In March 1996 nine test sections of a noise barrier were installed near Stockholm Sweden. The test sections include untreated Scots pine, spruce and larch and Scots pine, treated with different wood preservatives. After 8 years in service, the untreated spruce, pine and larch boards in contact with the soil were significantly decayed, with an estimated service life of about 5-10 years, while the untreated wood above ground is stained but not visibly decayed. Some degradation was detected in wood in soil contact for some of the preserved pine sections treated to AB levels (i.e. use class 3, above ground). Soil samples were collected at three horizontal distances from the barriers (0, 7 and 14 cm) with the 7 cm sample representing the drip line under a protective wedge designed to keep water out of the joints. Samples were collected at two depths representing groundline and the depth of the barrier in the soil (7.5 – 13 cm) and directly under the barrier. Soil samples collected after 8 years showed highest contaminant levels close to the barrier and under the wedge dripline. Arsenic levels in some locations close to CCA treated panels exceeded Swedish and Canadian soil guidelines for agricultural use and copper levels were above residential/park guidelines for some locations near ACQ and Tanalith MCB treated panels.
P A Cooper, Y T Ung, M-L Edlund, J Jermer, O Söderström

A comparative field test of the effectiveness of anti-sapstain treatments on radiata pine roundwood
1986 - IRG/WP 3376
Peeled radiata pine posts were sprayed with one of six antisapstain formulations, with and without a wax water-repellent additive, to evaluate the protection given by each treatment. After 3 months&apos; outside storage the best treatments tested were 4% product Busan 30, 2% product Busan 1009, and 2% active sodium pentachlorophenoxide (NaPCP) with 1.5% borax. After 6 months&apos; storage posts sprayed with Busan 30 were of sounder appearance than those sprayed with Busan 1009 or NaPCP plus borax. The effect of a water repellent on the moisture content of posts and on the severity of the fungal degrade was variable between treatments and requires further research.
J A Drysdale, R M Keirle

Copper naphthenate-treated Southern Pine pole stubs in field exposure. -Part 2: Chemical characterization of full size pole stubs 12 years after treatment
2000 - IRG/WP 00-30246
This study examines the influence of pre-treatment and post-treatment steaming on the character and physio-chemical nature of copper naphthenate in hydrocarbon solvent treated pine in larger, pole diameter, pole stub-length samples. This work is the continuation of two projects that began almost a decade ago. Previous reports indicated that certain morphological changes might occur in small laboratory steamed samples of copper naphthenate treated southern pine. Toluene-methanol extraction, UV-Vis spectroscopy, X-ray diffraction (XRD) and environmental scanning electron microscopy (ESEM) were used to investigate the nature and properties of the copper naphthenate present in the wood after 12 years of exposure. The formation of solid cuprous oxide occurred regardless of pre- or post-steaming conditioning.
H M Barnes, D P Kamdem, M H Freeman

The performance of glue laminated railway ties after 40 years of service in the main line track
1989 - IRG/WP 2325
Two series of horizontally glue laminated ties made of a softwood body and topped with a hardwood lamination were creosoted and installed in 1947 in a tangent and a curved main line track. The tests are now 40 years old and the excellent condition of the ties of these two series suggest that a service life of 50-60 years can be expected.
J P Hösli, E E Doyle, C P Bird, T Lee

300 years water-logged wood: Treatability with CCA-C
1998 - IRG/WP 98-40103
The treatability of 300 years water-logged and recent wood (Abies bornmülleriana M.) was assessed by dip treatment and vacuum and pressure cycling with CCA-C. Treatment runs were evaluated on the basis of weight gain retention and radial and tangential penetration measurements. The preservative penetration and retention levels in the 300 years water-logged wood were higher than in the recent wood due to water-logging.
S N Kartal, N Yilgör

Next Page