IRG Documents Database and Compendium


Search and Download IRG Documents:



Between and , sort by


Displaying your search results

Your search resulted in 5 documents.


Effects of pretreatments for the amelioration of preservative impregnability using the Oscillating pressure method (OPM)
1995 - IRG/WP 95-40044
For the purpose of an amelioration of preservative impregnability, three types of pretreatment: the steaming, the explosion and the boiling, were tested. The specimens were prepared by the domestic four species: Itajii, Ryukyumatsu, Sugi and Hinoki, and 1 refractry imported species: Douglas-fir. The dimension of specimens was 20 x 20 x 300 mm³ and were treated with CCA in a laboratory OPM machine. Three OPM schedules and Bethel process without after vacuume were tested in this experiment. The results obtained were follows: 1. In the case of the treatment of green woods, the calculated retentions of preservatives based on those initial mass, were periodically slowly increased or sometimes decreased. This reason was considered the replacement of the free water in wood to the preservative solution. The sapwood of rather easy treatable species like Ryukyumatsu, was obtained good penetration by Bethel process. The sapwoods of treatable species like Sugi and Hinoki, were obtained best penetration by OPM-1 or by OPM-2. The combination of the steaming and the OPM was rather good results for all species tested of green woods. 2. In the case of the treatment of the air-dried woods, the combination of the steaming and the OPM was obtained rather good results for all species tested included the refractry specimens like Douglas-fir.
K Suzuki, I Asaoka, S Tani, K Okada, T Hidaka


Effect of sterilization method on germination of spores of wood decay fungi observed by contact agar block method
1978 - IRG/WP 2117
Previous studies of germination of spores of wood decay fungi on wood have generally concluded that method of wood sterilization has little significant effect on germination response. This study expands the numbers of test fungi as well as number of sterilization methods employed to determine the influence of sterilization method on spore germination response of decay fungi. Germination was assessed on agar discs fused by aqueous diffusion path to 1 cm³ samples of aspen and white spruce sapwood.
E L Schmidt, D W French


Environmentally more acceptable solvents
1979 - IRG/WP 3131
The subject of this paper is hydrocarbon solvents with particular reference to the cyclo-aliphatic or naphthene-rich, grades which are now available. The specialised low aromatic high boiling petroleum fractions are also discussed.
A M Cumbers


Laboratory tests on artificial weathering of Quercus rubra crossties
1986 - IRG/WP 2252
Clear red oak (Quercus rubra) blocks were used to evaluate various types of accelerated aging tests including boil, steaming, and cyclic weathering. It was found that the repeated vacuum and pressure treatment of wood in water, steaming, oven-dry, and freezing appeared to be most effective in reducing the MOE in compression and hardness modules of wood specimens. Red oak crossties which were pressure treated with creosote - coal tar preservative were tested using the cyclic aging technique. This method will be used to establish correlation between short-term accelerated aging test results and long-term in service performance of wood crossties.
P Chow, A J Reinschmidt, E J Barenberg, S L Lewis


Influence of boiling on the quality of oakwood during peeling processes
2008 - IRG/WP 08-10656
Peeling process may be an efficient technology to transform secondary quality trees into veneer. After cutting and drying, veneer can be used for plywood or LVL production. If natural durability of these new panels is sufficient, they may be used for joinery production without preservative treatment. With the collaboration of ENSAM Cluny, Zvolen University and Pau University, we have investigated the different parameters of oak boiling and peeling process in laboratory. The goal was to preserve the best quality of oak veneer. One tree was separated in 9 different logs (1 meter length). Each of them was treated at different temperature (50, 70 or 90°C) during 12, 24 or 48 hours. Total phenols analysis has shown that important differences were observed. Total phenols content is decreasing with temperature and time of treatment until 40 %. The analysis of the best compromise between temperature of bath and preservation of phenols make us recommend the use of oak treatment at 60°C during 24 hours.
M Svoradová, F Charrier, R Marchal, L Bléron, B Charrier, J-C Butaud