Your search resulted in 318 documents. Displaying 25 entries per page.
Effects of phosphoric acid and diammonium phosphate treatments on the physical and fire-retardant properties of five selected Nigerian wood species
2024 - IRG/WP 24-20713
Wooden products in buildings are major sources of fuel for fire outbreaks. Effects of phosphoric acid and diammonium phosphate treatments on the physical and fire-retardant properties of wood species commonly used in buildings were evaluated. The timber species utilized in this study were sourced from the sawmill sector located in Akure, Nigeria, encompassing Brachystegia laurentii, Khaya ivorensi...
J Owoyemi, T O Akinwamide, O M Ibrahim, E A Iyiola
Preservative properties of boron-treated paulownia wood
2024 - IRG/WP 24-20729
This research was performed to investigate the preservative retention properties of paulownia wood treated using boric acid/borax at mass ratio of 1:1.8. Different portion of paulownia wood (top, middle, bottom) were used as a sample throughout of this study. In the treatment process, the paulownia wood was dipped in the 1% boric acid/borax solution for 1, 24, 72, 120 and 240 hours to achieve requ...
T Khadiran, M A M Abdullah, S Lipeh
Properties of thermal modified wood of Pinus pinaster, Pinus radiata and Pinus sylvestris from Galicia, Spain
2024 - IRG/WP 24-30800
This paper provides the results of a research about the properties of thermal modified wood of maritime pine (Pinus pinaster Ait.), radiata pine (Pinus radiata D. Don) and Scots pine (Pinus sylvestris L.) from Galicia, Spain, thermal treated in the industrial vacuum-heat autoclave plant of FINSA group in Galicia, Spain. These three pine wood species are used in different solid products but due the...
D Lorenzo, J Benito, J Arancon, J Crespo
Bio-durability and weathering performances of cardanol-treated wood
2024 - IRG/WP 24-30809
Cardanol is an excellent insecticide, fungicide, and termiticide derived from thermally treated cashew nutshell liquid (CNSL) and has been extensively explored in the chemical industry and for medicinal uses. However, its potential for wood protection remains unexplored. This study aims to understand the bio-durability and weathering properties of cardanol-treated wood. The southern pine and yello...
L Liang, McDonald, A G, L Cai
Assessment of hydrophobic properties of acetylated and furfurylated Korean wood species
2024 - IRG/WP 24-30812
To increase the utilization of Korean wood species, the hydrophobic properties of the most commonly used wood species in Korea were compared according to wood modification. Pinus densiflora (sapwood and heartwood) and Larix kaempferi (heartwood) were selected as test wood species, and Pinus radiata (sapwood) was selected as the control wood species. The wood modification was performed by acetylati...
S-M Yoon, Y-S Choi, H-M Lee, Y Park, W-J Hwang, S-K Jang
The durability and mechanical properties of 40 years old Black locust poles
2024 - IRG/WP 24-11042
This study investigates the durability and mechanical properties of 40-year-old black locust (Robinia pseudoacacia) poles harvested from a vineyard in Slovenia. Wood from these poles was compared to recently harvested black locust wood to determine possible reuse options. Visual inspection, hyperspectral imaging, and laboratory tests were conducted to assess decay, density, mechanical properties, ...
M Humar, J Malik, J Levanic, D Krzisnik, E Kerzic, B Lesar
CIOL Wood - Scientific Innovations in Wood Modification for Enhanced Performance and Usage
2025 - IRG/WP 25-20743
CIOL® is a wood modification technology designed as an environmentally friendly alternative to traditional wood preservatives. Utilising a biobased formulation based on sorbitol and citric acid, CIOL® enhances wood's chemical structure, improving its durability, stability, and resistance to decay. This paper provides an overview of the advancements made in CIOL® technology, including its improv...
E Larnøy, A Treu, M Diraison, M Smith, A Audouin, P T Lewandowski, J Biørnstad
Investigation of a commercial fire-retardant additive on particleboard properties
2025 - IRG/WP 25-20755
Fire resistance of wood-based panels is in addition to mechanical and sorption properties, an important property when considering its usability for construction applications. Increased fire resistance is achieved through fire retardant addition during panel production or by spraying fire-retardant on already finished panel. A potential downside of fire-retardant addition during panel production ca...
D Jones, S Medved, M Lawther
The Impact of Drying Techniques on the Quality of Thermally Modified Wood
2025 - IRG/WP 25-30813
The wood drying technique applied before loading the dry wood into the ThermoWood® kiln may affect its properties. For this purpose, Scots pine (Pinus sylvestris) boards were first dried through three drying methods, including radio-frequency/vacuum (RF/V), mild, and moderate conventional drying, and then loaded into a ThermoWood® kiln for thermal modification at 212 °C for 3 hours according to...
M Ghorbanian Far, N Sharifi, A Nikoutadbir, A Tarmian, M Humar
Novel treatments of solid wood - studies into the use of imidazole and succinimide
2025 - IRG/WP 25-30817
Recent activities have focussed on the use of ionic liquids (ILs) in wood treatments and bioprocessing. Most ILs are based on imidazolium systems, so it was decided to investigate the potential of imidazole as a treatment, along with another heterocyclic compound, namely succinimide. Thus, modification of Scots pine sapwood (Pinus sylvestris L.) with heterocyclic compounds, imidazole and succinimi...
D Jones, A Scharf, H Dernegård, J Oja, S Duarte, J Levanić, M Humar
The impact of common fire retardancy salts and minerals on further properties of wood
2025 - IRG/WP 25-30821
Wood has become an increasingly important construction material. To ensure fire safety, fire retardants are widely applied. Recent research focuses on environmentally friendly fire retardants with strong fixation. Phosphate-based salts like diammonium hydrogen phosphate show high fire protection potential but are highly leachable due to their good water solubility. As a newer trend mineralisation ...
T Franke, T Volkmer
Mineral-wood composites with improved fire properties and durability prepared through MgCO3-based mineralization
2025 - IRG/WP 25-30823
New mineral-wood composites that demonstrate improved fire properties and higher resistance to selected fungi have been prepared using an environmentally-friendly mineralisation process involving impregnation with an aqueous magnesium acetoacetate solution. MgCO3-based compounds are formed in situ, deep within the wood’s structure. We show that the new mineralisation method overcomes wood’s lo...
A Pondelak, N Knez, S D Škapin, M Humar, A S Škapin
Effect of Deep Eutectic Solvent Pretreatment on Properties of Densified Wood
2025 - IRG/WP 25-30824
Densified wood is preferable for structural applications because of its excellent mechanical properties and sustainability, but the fixation of its compression deformation and the prevention of water-induced mechanical deterioration remain challenging. Herein, an eco-friendly and highly efficient method was designed for producing dimensionally-stable densified wood, including deep eutectic solvent...
Y Ran, W Wang, J Cao
Properties of plasma etched super black wood
2025 - IRG/WP 25-30825
Super-black materials have very low reflectivity due to structural absorption of light. They are attracting considerable scientific and industrial attention because of their important applications in many fields including astronomy, photovoltaics, and optical science, amongst others. We have developed the first super-black material from wood by etching transverse basswood (Tilia americana L.) surf...
K J Cheng, X Xu, V A Hernandez, P D Evans
Process Development in Continuous Wood Densification and the Influence of Ionic Liquids on Set-Recovery and Mechanical Properties
2025 - IRG/WP 25-30827
The densification of wood significantly enhances its mechanical properties, making low-density species more viable for high-performance applications. However, challenges such as set-recovery (SR) and production speed hinder large-scale adoption. This study investigates continuous surface densification using a custom-built belt press and examines the effect of chemical pre-treatment with ionic liqu...
D Jones, A Scharf, B Neyses, D Sandberg
Optimising properties of citric acid-sorbitol bonded particleboards with added ammonium dihydrogen phosphate as fire retardant
2025 - IRG/WP 25-41033
Due to the adverse health effects of formaldehyde-based adhesives and their fossil origin, there is an ongoing search for appropriate bio-based adhesives for particleboards. Although there are some possible solutions, their use in construction is limited partly due to their low moisture resistance and flammability. The latter can be improved by adding various fire retardants. A particleboard with ...
L Kopač, S Medved, B Lesar, M Humar
Investigation of the Correlation between Blue-Light and Transparent Wood and Its Impact on Eye cells
2025 - IRG/WP 25-41042
The widespread use of LED blue light (400–480 nm) in modern life has raised concerns due to its potential risks to eye health, including retinal cell damage and vision degradation. Transparent wood, a renewable material with unique optical properties and environmental benefits, shows promising potential for blue light protection applications. This study investigates the modulation of lignin cont...
J-Y Jiang, C W Lin, P-Y Kuo
Preliminary assessment of imidazole as an adhesion system for particleboards
2025 - IRG/WP 25-41043
Particleboards with different combinations of adhesive mixtures containing imidazole, citric acid, and sorbitol were produced. Softwood sawdust from a Swedish sawmill was mixed with an aqueous solution of the chemicals and then dried to 0% moisture content prior to pressing. The boards were pressed to a target density of 700 kg m−3 at either 200 °C or 220 °C for 10 min. The hygroscopic and mec...
A Scharf, H Dernagård, J Oja, G Ormondroyd, S Medved, D Jones