Your search resulted in 839 documents. Displaying 25 entries per page.
Evaluation of 'Deep Penetration Treatment' for wood preservation
2025 - IRG/WP 25-20746
‘Deep Penetration Treatment’ (DPT) is a recently developed wood preservation technique in Japan designed to meet the preservation standards required for residential foundations. This method involves spraying a specially formulated solvent-borne wood preservative onto properly incised dried lumber. Despite being a non-pressure treatment, DPT achieves penetration levels comparable to conventiona...
M Ikeda, T Shigeyama, Y Sugai
Influence of incising methods and wood moisture content on ‘deep penetration treatment’ in Japanese cedar and larch
2025 - IRG/WP 25-20749
To expand applicability of ‘deep penetration treatment’, a solvent-borne and non-pressure treatment that is commonly coupled with roller-type incising using a flat blade, we investigated drill and laser machining as alternative incising methods and examined the influence of wood moisture content on the preservative penetration. Various incising methods were applied to heartwood of Japanese ced...
S Taira, T Miyauchi, S Isaji, H Matsunaga
NTR classified preservative-treated laminated wood
2025 - IRG/WP 25-20750
NTR is a trusted quality labelling system used for the classification and quality control of wood products that have been treated with preservatives or modified. These labels are issued by the Nordic Wood Preservation Council (NWPC) and in recent years, producers of glued laminated timber as well as building material suppliers have shown increasing interest in NTR classification for glued laminate...
J Jermer, F Westin, R Digaitis
The iTrussT project – Advancements in timber bridge design, preservation, and monitoring
2025 - IRG/WP 25-20751
The Norwegian research project iTrussT (2025–2028) aims to advance timber bridge design and unlock wood’s full potential as a sustainable solution for modern infrastructure. It addresses three critical challenges: First, fatigue testing of glued laminated timber lamellae will provide deeper insights into shear failure mechanisms, supporting the development of safer, more efficient structures a...
K-C Mahnert, U Hundhausen
Enhanced Termite Resistance of Low Durability Fast Growing Teak Wood by Non-Biocide Treatments Based on Chemical and Thermal Modification
2025 - IRG/WP 25-30818
Short rotation teak as a fast-growing tree can be considered as a renewable material resource for the future green economy. However, short rotation teak wood is susceptible to biodeterioration, particularly to termite attack. The objective of this work was to investigate the effect of chemical and thermal treatment on resistance of sapwood, transition wood, and heartwood of short rotation teak aga...
R Martha, K Candelier, M-F Thévenon, B George, I S Rahayu, W Darmawan, P Gérardin
Mineral-wood composites with improved fire properties and durability prepared through MgCO3-based mineralization
2025 - IRG/WP 25-30823
New mineral-wood composites that demonstrate improved fire properties and higher resistance to selected fungi have been prepared using an environmentally-friendly mineralisation process involving impregnation with an aqueous magnesium acetoacetate solution. MgCO3-based compounds are formed in situ, deep within the wood’s structure. We show that the new mineralisation method overcomes wood’s lo...
A Pondelak, N Knez, S D Škapin, M Humar, A S Škapin
Performance Verification of Water-Based Outdoor Wood Protection Coatings Based on Weather Resistance Evaluation
2025 - IRG/WP 25-41015
Recent trends in wood protective coatings: Concerns over volatile organic compound (VOC) emissions and the need to reduce maintenance costs have increased demand for environmentally friendly and highly durable coatings. While conventional solvent-based paints are superior in durability, they have been associated with problems such as environmental impact and odour during application. As an alterna...
N Ikemoto
AI Models for Accelerating Wood Protection Testing: Development of Predictive Tools Based on Long-Term Field Test Data
2025 - IRG/WP 25-41023
In this study, we present the development of DecAI, an artificial intelligence (AI) model designed to optimise and accelerate performance evaluations of wood protection products in the European EN 330:2014 "Field test: L-joint method." The Danish Technological Institute (DTI) compiled a dataset of over 100,000 data points from approx.10,000 L-joint samples collected over +15 years at field sites i...
J Stenbaek, B Noufel, L Glade, P Bisgaard
Transformation of bamboo: From multiscale fibers to robust and degradable cellulose-based materials for plastic substitution
2025 - IRG/WP 25-41032
Bamboo is an ideal candidate to replace traditional plastics, reduce environmental pollution, and promote harmony between nature and humanity owing to its rapid growth and renewability. However, achieving arbitrary shape-shifting of bamboo while retaining its high strength and degradability remains challenging. This study used multiscale interface engineering to transform bamboo into a robust, bio...
J Hu, Y Zhang, Y He, Z Su, W Lao, S Zhang, Y Yu, W Yu, Y Huang
Non-destructive methods for field assessment of wood biodeterioration in hardwood trailer decks exposed to tropical environments
2025 - IRG/WP 25-41039
Apitong (Dipterocarpus spp.), an increasingly rare tropical hardwood from the rainforest in Southeast Asia, has long been used as decking materials for open-bed trailers and trucks across North America. As the natural population of Apitong trees steadily declines, there is an urgent need to find sustainable, domestically sourced alternatives for trailer decking. A recent project evaluated the perf...
X Wang, X Xie, G Kirker, C A Senalik
Investigation of Impregnation Factors for Biomass-Based Phenol-Formaldehyde Resins
2025 - IRG/WP 25-41044
This study investigates the impregnation factors affecting the treatment of wood with biomass-based phenol-formaldehyde (PF) resins, such as impregnation methods, resin properties, and setting parameters like time and pressure. The goal is to ensure effective resin penetration into the wood cell wall structure, thereby enhancing wood durability and mechanical properties. Previous literature has la...
Y-C Huang, T-H Lin, P-Y Kuo
Recycling wood treated with copper-based preservatives to produce hard carbon materials for energy storage applications
2025 - IRG/WP 25-50401
In this study, we explored the possibility of recycling wood treated with copper-based preservatives to produce hard carbon materials for use in energy storage devices. We pyrolsed both untreated and copper-treated wood into hard carbon, conducted microstructural and physicochemical characterisation, prepared electrode materials, and evaluated their electrochemical performance in sodium-ion batter...
D Huo, J-P Bonnet, A Jamali
Investigation of Pressure-Treated Foundations with Wood Preservative and Termite Control in Existing Wooden Houses in Japan
2025 - IRG/WP 25-50402
Japan has extremely limited natural resources. Therefore, it is necessary to build a circular economy in which waste and other recyclable resources are effectively utilized in order to achieve sustainable development. This study aims to investigate the degradation of existing wooden houses and to contribute to the reuse of existing houses and the reuse of building materials during demolition. We i...
K Usami, T Kawada, H Ishiyama
Valorisation of bark extractives for wood and plant protection: the Extrabark project
2025 - IRG/WP 25-50415
The Extrabark project is an Interreg collaborative project between Lorraine in France, Wallonia in Belgium, the Saarland in Germany and Luxembourg. The objectives of the project are to develop a complete value chain of valorisation of bark generated by wood industry via the utilization of extracts or molecules for the protection of plants and wood material as a bio-sourced alternative to petrochem...
P Gérardin, C Gérardin-Charbonnier, S Dumarçay, F Obounou Akong, E Fredon, R Martha, J V Dorini Falavinha, W Donck, Z Nys, A Lepretre, L Taguimjeu, M-L Fauconnier, J Renaut, K Sergeant, S Saker, E Strilin, J Tchoumtchoua, M C Detroz, G Beauchamp