Your search resulted in 1543 documents. Displaying 25 entries per page.
How personality traits influence the perception of fungal decay in a wooden cladding – A survey in three Modelling wood moisture content in outdoor conditions from measured data
2024 - IRG/WP 24-41002
This study examined perceptions of fungal decay damage on wooden cladding across Norway, Sweden, and Germany. The majority of respondents across all countries did not find the fungal decay damage in question acceptable, with the least acceptance in Norway. This could be due to Norway having the highest frequency of wooden residential buildings and the most experience with maintaining wooden claddi...
G W Gustavsen, G Alfredsen, P B van Niekerk, J Niklewski, C Brischke
Modelling the service life of wood in ground contact – Verification of remotely sensed soil data from the reanalysis dataset ERA5-Land using in-situ measurements at a test site of utility poles in Eastern Norway
2024 - IRG/WP 24-41003
This study compared soil moisture and temperature estimates from the 5th European reanalysis (ERA5-Land) dataset with in-situ measurements to assess the accuracy and applicability of ERA5-Land data for modelling the service life of wood in ground contact. The ERA5-Land soil temperature estimates showed a moderate correlation with the in-situ temperature measurements (Spearman’s ρ of 0.73) and a...
U Hundhausen, P B van Niekerk, B Marais
Modelling wood moisture content in outdoor conditions from measured data
2024 - IRG/WP 24-41005
Sustainable use of wood requires an understanding of expected service life, particularly when the material is exposed to outdoor conditions and, thus, fungal decay. Since moisture is the primary vector for fungal decay, accurate moisture prediction is a key component in service life assessment. For this purpose, the present study leverages existing measured data for linear regression of in-field m...
J Niklewski, P B van Niekerk, L Meyer-Veltrup, J Sandak, C Brischke
Service life of poplar, a low durability hardwood
2024 - IRG/WP 24-41007
Hybrid poplar is the most common plantation hardwood of the temperate climate zone and is complementary to natural stands of aspen with mainly plantations in Europe and China. Poplar wood has been considered as a valid alternative for many of the construction applications of softwoods especially when considering engineered wood products.
The natural durability of hybrid poplar is low and for a ra...
J Van Acker, X Jiang, L De Ligne, J van den Bulcke
Changes in decay risk of wood in ground contact over Europe, from analysis of historic climate conditions
2024 - IRG/WP 24-41008
Changing climate conditions will affect global temperature and precipitation patterns, shifting some geographical areas into states that are more suitable for fungal wood decay. Climate normals, which are taken over a 30-year period, capture vast spatial and temporal variations in these conditions and comparing these can show changes over time. Importantly, being able to identify locations that ha...
P B van Niekerk, B N Marais, G Alfredsen, C Brischke
Performance of Douglas-fir cross laminated timber (CLT) subjected to elevated humidity in a ground proximity field test for 6 years
2024 - IRG/WP 24-41010
The ability of insecticidal soil drenches or spray-on insecticide/fungicide treatments to protect mass timber elements exposed in a high moisture environment but out of direct soil contact was assessed using a modified AWPA ground proximity test established in 2017. Three-ply Douglas-fir CLT pieces measuring 305 x 355 x 105 mm (L x H x W) were installed at the Harrison Experimental Forest (HEF) (S...
M E Mankowski, J J Morrell, T G Shelton, G T Kirker
Field facility for conducting wood durability tests at LSU Agricultural Center
2024 - IRG/WP 24-41012
Efforts by Louisiana State University Agricultural Center (LSU AgCenter) to conduct wood durability research on C. formosanus and other wood-related topics, have led to establishing three field research sites to test wood products against Formosan subterranean termites (New Orleans, La), and native subterranean termites (Franklinton, LA), and to test utility poles for outdoor exposure, decay resis...
Q Wu, J Curole
Durability of Malaysian plybamboo to mold
2024 - IRG/WP 24-41014
Durability of 3-layer plybamboo fabricated from two Malaysian bamboo species, Gigantochloa levis (beting) and Gigantochloa scortechinii (semantan) using three different adhesives - urea formaldehyde (UF), melamine urea formaldehyde (MUF) and phenol resorcinal formaldehyde (PRF) was evaluated in this study. Samples were exposed to the mold, Aspergillus brasiliensis for 4-week following the ASTM D44...
S Lipeh, A Mustapha, A S Yusoh, M K A Uyup
Determining the minimum water vapor permeability of exterior wood coatings by means of hygrothermal and decay models
2024 - IRG/WP 24-20717
The objective of this study was to determine the minimum water vapor permeability of exterior wood coatings for log homes using hygrothermal and decay modeling. The approach is based on a worst-case scenario assumption, namely a moisture trap at a given wood moisture content in a coated wall log. The minimum limit of vapor permeability of the coating system was determined by simulating the time re...
U Hundhausen, S Ullah, D Kraniotis
Synthetic Oxalate/ß-glucan Fungal Extracellular Matrix Demonstrates Potential Inhibition of Extracellular Enzyme Diffusion into Wood Cell Walls, and Calls into Question the Role of Enzymes in Wood Decay
2025 - IRG/WP 25-11053
ß-glucan is the major component of the extracellular matrix (ECM) of many fungi, including wood degrading fungi. Many of these species also secrete oxalate into the ECM. Our research demonstrates that ß-glucan forms a novel, previously unreported, hydrogel at room temperature with oxalate. This finding better explains the gel-like nature of the fungal ECM. Oxalate, at relatively low levels, was ...
B Goodell, G A Tompsett, G Perez-Gonzalez, K Mastalerz, M Timko
Decay pattern in external wooden structures
2025 - IRG/WP 25-11055
Decay in external wooden structures has historically been a universal problem of great concern. Despite this, the general understanding of where and why wood-decaying fungi are occurring is limited. The consequences of this are that decayed wood might not be detected and that measures to protect the wood against deterioration has limited effect.
Wood decay in different geographical and climatic ...
J Mattsson, M S Austigard, A-C Flyen
Fungal degradation of oak timber bridges
2025 - IRG/WP 25-11058
Wood is increasingly recognised as an eco-friendly building material, but its organic nature makes it vulnerable to degradation, especially in outdoor applications exposed to moisture. This study investigates wood-decaying fungi affecting oak timber bridges in Hanover, Germany. The study aimed to identify the fungal species using culture-independent methods and to examine the impact of poorly exec...
L Schrader, J Trautner, C Brischke
Revealing the degradation process of Moso bamboo (Phyllostachys edulis) by different decay fungi
2025 - IRG/WP 25-11060
Moso Bamboo (Phyllostachys edulis) is the main bamboo species for engineering; however, it is highly susceptible to various fungi during use. In this study, four prevalent decay fungi, including two brown rot fungi and two white-rot fungi, were used as the test fungi to investigate the changes in structure and chemical composition of Moso bamboo samples at different incubation times in order to be...
J Xue, D Cui, M Zhou, J Cao
A comparison of methods – how to achieve a robust and conclusive durability classification of wood
2025 - IRG/WP 25-11063
The biological durability of wood is a relative and unitless size, and therefore wood species and wood-based materials are assigned to durability classes (DC). In Europe, such classes are based on a variety of measures, which can be absolute or relative to a non-durable reference species. The aim of efforts to develop and standardise methods for determining biological durability should be to ensur...
C Brischke
Evaluation of decay detection drill data – a semi-quantitative approach
2025 - IRG/WP 25-11067
Decay detection drilling and pick testing are common methods for evaluating decay in structural timber. In this study 63 poles in snow fence trusses at Finse in Norway, where climate change is expected to increase decay hazard, were evaluated by both drilling and pick testing. The aim of this study was to 1: assess a novel method to translate qualitative evaluation of drilling data into quantitati...
M S Austigard, J Mattsson, G Alfredsen, L Ross, N Bjerregaard Pedersen
Durability and molecular analysis of fungal communities in wood exposed above ground
2025 - IRG/WP 25-11068
The objective of the study was to explore the durability of wood exposed above ground, comprising a wide diversity of wood species and treatments and extensive assessment data on wood durability in ongoing long-term testing. Larch species and Scots pine heartwood, two tropical species ntholo and ncurri and a number of treated wood by copper-based formulations and alternatives (silanes, spiroborate...
N Högberg, D Panov, G Daniel, N Terziev
Detecting wood-decay fungi in walls: a non-destructive approach with an electronic nose
2025 - IRG/WP 25-11070
Wood-decay fungi degrade the structural integrity and safety of wooden buildings, leading to potential hazards and reduced durability. Conventional detection methods, such as visual inspection and destructive sampling, are often impractical for concealed spaces, such as those within walls or beneath floors. These methods often require specialised training and costly equipment, making non-destructi...
M Suzuki, T Miyauchi, S Isaji, R Naganawa
Interaction of cellulolytic enzymes with fungal cell wall polysaccharides
2025 - IRG/WP 25-11071
Wood rotting fungi are the primary agents responsible for the decomposition of wood in natural environments. These fungi secrete a variety of enzymes to degrade the chemically and structurally resistant components of the wood cell wall. Some of these enzymes possess a carbohydrate-binding module (CBM), which enhances enzymatic efficiency by increasing their affinity to the substrate. Previously, w...
K Fukabori, N Hattori, Y Kojima, R Iizuka, M Yoshida
Natural and enhanced durability of wood exposed above ground
2025 - IRG/WP 25-11079
Understanding and predicting the durability of wood is essential for ensuring its effective use, long-term reliability, and sustainability in various applications. To address this need, the "Wood Above Ground" project was initiated in 1999 at the Danish Technological Institute (DTI) to investigate the natural durability of wood species under a wide range of above-ground exposure scenarios. This ex...
R Digaitis, J Stenbaek, A W Christof, N Morsing, B Lindegaard
Synergistic effect of the association of Prosopis juliflora polyphenolic extractives with tebuconazole on the growth inhibition of brown and white rot fungi: a solution to increase the naturality and safety of wood preservation treatment
2025 - IRG/WP 25-20732
The antifungal effect of catechin and extractives from Prosopis juliflora was studied against one white rot fungus, Trametes versicolor (TV), and one brown rot fungus, Rhodonia placenta (PP). The extractives from Prosopis julilfora were crude mesquitol and pure mesquitol. Tebuconazole was used in this study as a known fungicide against the two named fungi. Wood protection using fungicides can be h...
J Owino, J Tuimising, F Mangin, P Gérardin, A Kiprop, C Gérardin-Charbonnier
Improvement and practical application of dry-type pressure treatment method
2025 - IRG/WP 25-20734
In years, the need for environmental consideration has been reaffirmed worldwide, and in Japan too, there is a demand for the expansion of the uses of wood in order to achieve a decarbonised society. So, there is also a need to develop and improve wood preservation treatment methods that overcome the weaknesses of wood and enable it to be used in a wide range of applications. The authors have impr...
D Tezuka, C Igarashi
Mitigating the risk of decay in CLT buildings affected by trapped construction moisture using a diffusible borate preservative
2025 - IRG/WP 25-20735
Cross-Laminated Timber (CLT) is also known as a mass timber construction material. It is fabricated by gluing together multiple layers of timber lamellae with each layer oriented perpendicular to the one below it. This enhances strength, stability and dimensional rigidity. CLT is seen as an excellent ‘low carbon’ alternative to using steel and concrete and is growing in popularity as a sustain...
J R Williams
Securing Flame Retardancy in Wood: Durability After Artificial and Natural Weathering Test
2025 - IRG/WP 25-20738
The outdoor use of wood is often limited by challenges such as dimensional instability, vulnerability to fungal decay, and high flammability. Traditional flame retardant treatments improve fire resistance but suffer from significant leaching under environmental exposure, reducing their long-term effectiveness. This study introduces an innovative solution by integrating flame retardants with DMDHEU...
M Wu, L Martin, H Militz
A novel anti-fungal wood crack repairing agent based on CQDs/PVA
2025 - IRG/WP 25-20744
Wood is a sustainable material, but its tendency to crack and decay poses a challenge for its applications. In this study, we developed a combination system of nitrogen-doping carbon quantum dots (N-CQDs) and polyvinyl alcohol (PVA) to repair wood cracks. Rather than employing the conventional repairing methods such as filling cracks with sawdust and petroleum based-adhesives, this technique can m...
X Zhao, Z Zhang, Y Peng, W Wang, J Cao
Transmission poles - Analysis of causes of premature failure in Slovenia
2025 - IRG/WP 25-20745
The study focuses on analysing the causes of the premature collapse of wooden transmission poles in Slovenia, where there have been several cases of rapid fungal decomposition of poles despite the planned lifespan of 30 to 50 years. The poles were made of Scots pine wood and impregnated with a copper-ethanolamine wood preservative. The research aimed to assess the condition of standing poles and e...
M Humar, B Lesar, N Kregar, S Drnovšek