IRG Documents Database and Compendium

Search and Download IRG Documents:

Between and , sort by

Displaying your search results

Your search resulted in 1441 documents. Displaying 25 entries per page.

Effect of acetylation on decay resistance of wood against brown-rot, white-rot and soft-rot fungi
1989 - IRG/WP 3540
Effect of acetylation on decay resistance of wood was investigated using wood blocks of Cryptomeria japonica, Pinus densiflora, Albizia falcata and Fagus crenata. Blocks were treated with uncatalyzed acetic anhydride for different lengths of time and exposed to Tyromyces palustris, Serpula lacrymans, Coriolus versicolor and unsterilized soil. The action of OH-radical on acetylated wood was also examined using Fenton's reagent. The enhancement of decay resistance by acetylation was revealed clearly for all cases of exposures but varying with fungal and wood species used. For a brown-rot fungus Tyromyces palustris, the weight loss reached almost nil in all woods at 20 WPG (weight percent gain) of acetylation, after the striking decrease from 10 to 15 WPG. For a white-rot fungus Coriolus versicolor, it was counted until 12-15 WPG in the perishable hardwoods used, but not in a softwood Cryptomeria japonica, even at 6 WPG. In cases of another brown-rotter Serpula lacrymans and soil burial, effect of acetylation was intermediate between Tyromyces palustris and Coriolus versicolor. Anti-degradation mechanism by acetylation was discussed, from these weight loss - weight gain relationships, and the IR-and 13C-NMR spectral analyses of fungus-exposed wood.
M Takahashi, Y Imamura, M Tanahashi

Questionnaire - Fungal decay types
1985 - IRG/WP 1265
T Nilsson

JWPA method for testing effectiveness of surface coatings with preservatives against decay fungi
1981 - IRG/WP 2164
In 1979 JWPA established a new method for testing effectiveness of surface coatings in accordance with practical use of preservative-treated lumber. Comparing the new testing method with JIS A 9302, a few new trials - size of wood specimen, weathering procedure, and decay-test procedure - are incorporated.
K Tsunoda

Nondestructive Evaluation of Oriented Strand Board Exposed to Decay Fungi
2002 - IRG/WP 02-20243
Stress wave nondestructive evaluation (NDE) technologies are being used in our laboratory to evaluate the performance properties of engineered wood. These techniques have proven useful in the inspection of timber structures to locate internal voids and decayed or deteriorated areas in large timbers. But no information exists concerning NDE and important properties of wood composites exposed to decay fungi. For our pilot study on several types of wood composites, we examined the relationship between nondestructive stress wave transmission, decay rate and the bending properties of OSB exposed to the brown-rot fungus, Gloeophyllum trabeum (MAD-617). The following measurements were taken: stress wave transmission time (pulse echo test method), static bending test (ASTM D3043-95), and decay (expressed as percent weight). Stress wave measurements correlated with strength loss and with increasing rate of fungal decay. Stress wave NDE has great potential as a method for inspection of wood composite load-bearing (in-service) structures, detection of decay in laboratory tests, assessment of chemical additives to improve wood composite durability, and prediction of long term composite performance.
B Illman, V W Yang, R J Ross, W J Nelson

Monographic cards for wood-destroying fungi. [Fiches monographiques pour les champignons lignivores]
1970 - IRG/WP I 5B
C Jacquiot

On Donkioporia expansa (Desm.) Kotl. & Pouzar
1986 - IRG/WP 1285
Donkioporia expansa is found more often in houses than realised until now. Virulence tests according to EN 113 show not only an attack of oak, but also of other hardwoods and even soft-woods.
G Buchwald

Moisture content levels and decay of hemlock
1986 - IRG/WP 1287
As a model of decay conditions of wooden members in wooden houses, a decay test was set up in which samples of western hemlock (Tsuga heterophylla) under 4 moisture levels were examined. Each week the samples were weighed and if the weights indicated that their moisture contents were lower than the expected levels, distilled water was added. Every 8 weeks 3 samples from each condition were oven dried at 60°C for 48 hours, up to 48 weeks. After 48 weeks, 3 samples from each condition were oven dried every 16 weeks. The results obtained were as follows: After examining the samples for 96 weeks at 27°C, the mean weight loss of the hemlock samples kept at about 50-100% moisture content level was larger than those of the other levels. If the samples were dried every 8 weeks, the amount of decay in them was not significant. Decay was also not significant in the samples kept at approximately 20-30% moisture content level.
K Suzuki

Additions and corrections to recent names for some common decay fungi
1977 - IRG/WP 167
A Käärik

The dry rot fungus and other fungi in houses. Part 2
1993 - IRG/WP 93-10001
J Bech-Andersen

Effects of acetylation on the dimensional stability and decay resistance of kenaf (Hibiscus cannabinus L.) fiberboard
1996 - IRG/WP 96-40059
The objective of this study was to investigate the influence of the acetylation treated kenaf fiber, Phenol formaldehyde resin content level, and three fungi species on the dimensional stability and decay resistance of high density non wood composition boards. A standard ASTM method was used to evaluate weight loss and thickness change. The linear shrinkage and expansion of each species were also determined. All specimens were exposed to decay chambers for 16 weeks. Test results indicated that most of the main factors significantly influence the thickness, length changes, and decay resistance of the high density kenaf fiberboards.
P Chow, T Harp, R Meimban, J A Youngquist, R M Rowell

Valid names for some common decay fungi, their synonyms and vernacular names
1978 - IRG/WP 172
A Käärik

A laboratory method for assessing the effectiveness of fungicides in preventing the spread of decay fungi within packages of unseasoned lumber
1983 - IRG/WP 2202
To study the deterioration caused by decay fungi in the laboratory, a method for testing fungicides for their effectiveness in preventing spread of decay was devised. Some experiments using this method are reported here.
A J Cserjesi, E L Johnson, A Byrne

Physical properties of ß-1,4-Xylanase produced by Postia (=Poria) placenta: Implications for the control of brown rot
1987 - IRG/WP 1318
The degradation of hemicelluloses is an early event in wood decay by brown-rot fungi. An understanding of the physical properties of hemicellulases may suggest target mechanisms for the development of new control agents. Endo-b-1,4-xylanase was partially purified by column chromatography from wood decayed by Postia (= Poria) placenta. The enzyme was extremely resistant to denaturing conditions; no loss of activity was detected after 2 h in 9 M urea or 6 M guanidine-HCl. Boiling the enzyme for 5 min in 2.5% SDS + 0.5% b-mercaptoethanol reduced its activity by 65%, as measured by the production of reducing sugars. The activity of a-D-galactosidase, another enzyme detected in large quantities in the decayed wood, was reduced by 98% under these conditions. Optimum pH and temperature ranges were pH 2-6 and 50-60°C, respectively. The enzyme appears to be a glycoprotein containing 50-60% carbohydrate (w/w); the carbohydrate moiety may protect the enzyme from adverse environmental conditions. The control of brown rot by in situ inactivation of xylanase may not be feasible because of the enzyme's extreme stability.
J A Micales, F Green III, C A Clausen, T L Highley

Successive collections of Basidiospores from wood decay fungi (in vitro) show variation in germination levels on common media
1978 - IRG/WP 191
In the course of various preliminary experiments in which spore germination levels of 6 decay fungi on malt and water agar were recorded as controls, it was noted that one could not reliably obtain an expected level of spore germination for any particular fungus. Inconsistent 'control' spore germination levels of a fungus greatly complicates large scale experiments in which comparisons of data based on germination levels are attempted upon replication of the study over time. This study was done to determine if, in fact, spores collected at different times from specific hymenial areas of wood decay fungi sporulating in vitro differed significantly in germination level on common media under standardized conditions.
E L Schmidt, D W French

Durability of larch (Larix spp.) wood against brown-rot fungi
1997 - IRG/WP 97-10228
Durability of the heartwood of Larix decidua, L. sibirica, L. gmelinii, L. gmelinii var japonica, L. gmelinii var olgensis and L. sibirica x decidua against brown rot fungi Coniophora puteana, Poria placenta and Gloeophyllum trabeum was tested according to EN 113 test method. Parallel samples were used to study the amount and composition of wood extractives. The sample trees originated from the research forest of Punkaharju Research Station. The average age of the trees was 60 years. In addition, from L. sibirica also trees at 25 and 102 years were used. Results show that the durability of larch is depending on species, age of the tree, the wood part (inner or outer heartwood) and fungus. The average durability of larch heartwood was equal to class 3 or 4 (moderately or slightly durable, according to the standard EN350:2) and comparable with the durability of pine heartwood (Pinus sylvestris L). However, the durability of L. gmelinii var olgensis and L. sibirica (102 years old) was on the higher level than that of the other studied species but the durability varied even within the same board. Also the durability of wood from L. sibirica grown in the Russian side (Siberia) was studied. It was equal to that of the trees grown in Finland. The average amount of resin acids of larch heartwood was only about 0.1% (dry weight). In contrast, the heartwood of scots pine may contain up to 4.0% of resin acids. Resin acids are found to inhibit the linear growth of certain fungi. Interestingly, the largest amounts of resin acids (0.3%) were found in the heartwood of L. gmelinii which also showed high durability. The concentration of water soluble extracts (mainly arabinogalactan) of larch heartwood was quite large, varying between 3.2 - 20.5%. The concentration of water soluble extracts in the heartwood increased along the age of the trees. Lowest level of extractives were found in Larix decidua which was also the least decay resistant species. The durability of wood in different targets and the role of different chemical compounds of larch heartwood on decay resistance needs to be clarified.
H Viitanen, L Paajanen, P Saranpää, P Viitaniemi

Monographic card on Antrodia serialis
1984 - IRG/WP 1145
G Seehan

Influence of aliphatic acids on spore germination of wood decay fungi
1984 - IRG/WP 2224
Influences of eight saturated fatty acids (C5-C10, C12 and C16) on spores of four isolates of wood decaying basidiomycetes (white rot fungi: Poria tenuis and Trametes hispida; brown rot fungus: Gloeophyllum trabeum [two isolates]) were observed in-vitro. Spore response after 24 hr on malt extract agar containing 10, 10² , or 10³ ppm of each fatty acid included: no effect on normal germination, delayed germination or restricted mycelial growth, vacuolation and degeneration of spore cytoplasm, or germination inhibition without loss of spore integrity. C7-C10 acids destroyed spores of all fungi at 10² ppm whereas spores remained 'intact' at 10³ ppm of the same acids. C12 destroyed spores of the brown rot isolates but not the white rot fungi, and C16 lacked effect on all fungi at all concentrations. C5 and C6 destroyed spores only at 10³ ppm.
E L Schmidt

Gloeophyllum trabeum and Gloeophyllum abietinum, the most frequent brown rot fungi in fir wood joinery
1999 - IRG/WP 99-10319
In Croatia the primary raw material for joinery production is silver fir wood (Abies alba Mill). L-joints made of home-grown fir sapwood and prepared according to EN 330: 1993 were used to establish the infection and colonisation of micro-organisms, particularly wood decay fungi, to compare the performance of untreated and 1% TnBTO treated L-joints. The L-joints were coated with two types of coat, and 36 months exposed in Zagreb. The first type of coat was alkyd paint and the second was a stain, in three different colours: white, brown, and black. The influence of the preservative, and the type of coat were most important factors which affected the rate of colonisation. The influence of coat colours was significant at the the beginning of exposure. The fastest and the strongest colonisation occurred in untreated L-joints coated with alkyd paint and the lowest colonisation occurred in treated L-joints coated with stain. It was due to the well known vaporous diffusivity of the stains and the low natural permeability of fir sapwood. The most frequently isolated fungi were Gloeophyllum trabeum (Pers.: Fr.) Murr. and Gloeophyllum abietinum (Bull.: Fr.) Karst.
R Despot, M Glavas

A direct method for testing plywood and particle boards against fungal decay
1984 - IRG/WP 2214
A method directly inspired from the French standard testing method of the resistance of particle boards against fungal decay (AFNOR N° 51.295 May 1980) is described. But in that experimentation, the infestation is localized and realized in non sterile conditions. Small blocks of Fagus sylvatica (60 x 20 x 10 mm³) used as " inoculates " are infested with basidiomycetes, in Kolle flask for 4 to 6 weeks, then tightly pressed against the middle part of the test specimens (190 x 15 x 15 mm³). The lower part of the inoculates is plunged in vermiculite kept constantly humid by water containing a selective fungicide. After twelve weeks of exposure in non sterile conditions, in a green house with constant temperature around 20°C, the test specimens are then submitted to a static bending test until fracture. The comparison of the fracture-stress between control test specimens and the specimens exposed to wood rotting basidiomycetes permits to evaluate the resistance of the studied materials against fungal decay.
L N Trong

The influence of crystalline and amorphous cellulose on extracellular hydrogen peroxide production by brown-rot fungi
1991 - IRG/WP 1482
The production of hydrogen peroxide (H2O2) has been suggested to play a key role in the degradation of wood by wood-rotting fungi. The production of extracellular hydrogen peroxide was studied by a quantitative method which detects the oxidation of the 2,2-azinobis(3-ethylbenzthiazoline-6-sulphonic acid) (ABTS) by H2O2 and horseradish peroxidase (HRP) in liquid culture medium. The carbon sources used were crystalline and amorphous cellulose. Two brown-rotters, Serpula lacrymans and Poria placenta, were able to produce clearly detectable amounts of extracellular hydrogen peroxide in liquid medium which contained crystalline cellulose as carbon source. No detectable H2O2 was produced in conditions where amorphous medium was used as carbon source. This result suggests that the conformational structure of the substrate may induce H2O2 production by brown-rot fungi.
A-C Ritschkoff, L Viikari

Proposals for a vermiculite burial soft rot test method
1980 - IRG/WP 283
J G Savory, J K Carey

Questionnaire pour la préparation de fiches monographiques pour les champignons lignivores
1972 - IRG/WP 103 F
C Jacquiot

Effects of a chitin synthesis inhibitor on spore germination of the decay fungi Gloeophyllum trabeum and Poria tenuis
1986 - IRG/WP 2253
This study sought to determine the effect of a chitin synthesis inhibitor - Polyoxin D, on spore germination and early hyphal development of a brown rot and a white rot fungus in-vitro. Polyoxin D is a competitive, substrate-analogue type of chitin synthtase inhibitor (2). The drawbacks to use of such a compound as a wood preservative tie. cost - $20,000/g, possible leaching or degradation) might be reduced should it be effective in preventing decay initiation by spore germination at very low concentrations.
E L Schmidt

Decay fungi in Finnish houses on the basis of inspection samples from 1978 to 1988
1989 - IRG/WP 1401
A summary of the causes and sources of fungal damages was made on the basis of decay samples and sample information sent to the Forest Products Laboratory of the Technical Research Centre of Finland (VTT) between 1978 and 1988. About 50-130 decay cases in wood structures were studied annually. In almost 50% of all fungusdamage cases the cause was Serpula lacrymans. The proportion of Coniophora puteana is also high and the occurrence of Antrodia and Poria species is general. The most generally damaged structures were floors. According to sample information water pipe leakages often caused the damage.
L Paajanen, H Viitanen

Contribution to study of the degradation caused in Pinus spp. poles used in field test
1989 - IRG/WP 1417
The study of the degradation produced by soil natural microflora on wood in contact with it in the field, has been going on for several years now. Our contribution to this aim in the present work has dealt with the possible relationship of the microorganisms in the soil. The microscopic visualization of wood colonization by the microorganisms, and the chemical analysis of the degraded wood compared with the undergraded.
M T De Troya, A Garcia, M J Pozuelo, A M Navarrete, A Cabanas

Next Page