Your search resulted in 266 documents. Displaying 25 entries per page.
Comparison of AE-apparatus for detection of activity of Old house borer larvae, including reality check
2021 - IRG/WP 21-10981
As part of the German funded project ‘InsectDetect’ comparative measurements were done with three different Acoustic-Emission-(AE)-apparatus on 14 pine beams in order to assess presence of active attack by the Old house borer (Hylotrupes bajulus (L.)).
In all beams active attack was measured, though in varying intensity. This was corroborated by completely dissecting 10 of the beams. All thre...
J Creemers, B Plinke, U Noldt
Green approach in wood mineralization for improvement of fire properties
2022 - IRG/WP 22-30769
Various treatments have been developed in order to improve fire properties of wood. Because the use of some flame retardants can release toxic compounds in the event of a fire, leading to poisoning or even death of people from smoke inhalation, the use of no-toxic and more ecologically acceptable flame retardants is preferable. Mineralization of wood with the incorporation of carbonates has proven...
A Pondelak, R Repič, L Škrlep, N Knez, F Knez, A S Škapin
Improving wood durability by mineralisation and thermal modification
2022 - IRG/WP 22-40948
A significant increase in the fungal durability of wood was achieved by using a modification procedure combining two environmentally friendly methods: thermal modification and mineralisation. It offers an ecological alternative to other biocidal treatments. European beech (Fagus sylvatica) and Norway spruce (Picea abies) were selected as model wood species and exposed to four different fungi: Gloe...
R Repič, A Pondelak, D Kržišnik, M Humar, A S Škapin
Field test methods as long-term aging – report of selective wood properties
2023 - IRG/WP 23-40962
Wood samples from a long-term field test are a valuable compendium of information about the material in the context of its aging processes. In the current work, wood samples from the round-robin test within the ECOMOD project were used as a material for the natural aging process (III and IV class of utility). The research scope was to determine selected properties of this wood which can be partial...
W Perdoch, M Benc, B Mazela, A Szulc, J Cegiela
Utilising novel service life prediction methods for robust and precise Life-Cycle-Costing (LCC)
2023 - IRG/WP 23-50384
Life-Cycle-Costing (LCC) is one of the basic indicators for the assessment of sustainability and cost effectiveness in construction applications. Project WoodLCC was thus conceived to enable LCC through input from models for detailed service life planning of wooden components and buildings. The project is a continuation of the service life planning research conducted in Europe over the last three ...
P B van Niekerk, G Alfredsen, T Kalamees, R Modaresi, A Sandak, J Niklewski, C Brischke
Structural health assessment of wood - A comparison of methods for determining the spatial spread of fungal infestation in beams and rafters
2025 - IRG/WP 25-11051
Wood decay in buildings can cause severe economic losses, require comprehensive refurbishment, and removal of decayed wooden elements from the building. The latter aims at restoring the structural integrity of the component or the entire building through replacement, and at preventing the infestation from spreading further. In practice, components are cut out of the structure to such an extent tha...
C Brischke, N Sommerfeld, E Flohr, A K Mayer, S Bollmus
A comparison of methods – how to achieve a robust and conclusive durability classification of wood
2025 - IRG/WP 25-11063
The biological durability of wood is a relative and unitless size, and therefore wood species and wood-based materials are assigned to durability classes (DC). In Europe, such classes are based on a variety of measures, which can be absolute or relative to a non-durable reference species. The aim of efforts to develop and standardise methods for determining biological durability should be to ensur...
C Brischke
Evaluation of decay detection drill data – a semi-quantitative approach
2025 - IRG/WP 25-11067
Decay detection drilling and pick testing are common methods for evaluating decay in structural timber. In this study 63 poles in snow fence trusses at Finse in Norway, where climate change is expected to increase decay hazard, were evaluated by both drilling and pick testing. The aim of this study was to 1: assess a novel method to translate qualitative evaluation of drilling data into quantitati...
M S Austigard, J Mattsson, G Alfredsen, L Ross, N Bjerregaard Pedersen
Detecting wood-decay fungi in walls: a non-destructive approach with an electronic nose
2025 - IRG/WP 25-11070
Wood-decay fungi degrade the structural integrity and safety of wooden buildings, leading to potential hazards and reduced durability. Conventional detection methods, such as visual inspection and destructive sampling, are often impractical for concealed spaces, such as those within walls or beneath floors. These methods often require specialised training and costly equipment, making non-destructi...
M Suzuki, T Miyauchi, S Isaji, R Naganawa
Screening of fungi capable of degradation of β-aryl ether bond from lignin model compounds by using highly fluorescent-emitting detection
2025 - IRG/WP 25-11081
Lignin is an aromatic polymer and composed of phenylpropane units polymerized by dehydrogenases in cell walls. Lignin has a complex chemical structure with C-C and C-O-C bonds, and it is difficult to decompose lignin structure by microorganisms in natural conditions. For the microbial degradation of lignin structure, wood decay fungi can non-specifically degrade the lignin polymeric structure by o...
A Ishikawa, Y Mori, Y Ota, M Kiguchi
Influence of incising methods and wood moisture content on ‘deep penetration treatment’ in Japanese cedar and larch
2025 - IRG/WP 25-20749
To expand applicability of ‘deep penetration treatment’, a solvent-borne and non-pressure treatment that is commonly coupled with roller-type incising using a flat blade, we investigated drill and laser machining as alternative incising methods and examined the influence of wood moisture content on the preservative penetration. Various incising methods were applied to heartwood of Japanese ced...
S Taira, T Miyauchi, S Isaji, H Matsunaga
Quantitative Prediction of Latent Deterioration in Wood Coatings Using Mid-Infrared Spectroscopy and Machine Learning
2025 - IRG/WP 25-41038
Wood coatings play a vital role in prolonging the lifespan of timber structures by protecting them from environmental degradation. However, conventional evaluation methods rely on visual inspections, which cannot detect latent deterioration before visible damage occurs. This study integrates attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy with partial least squares ...
Y Teramoto
Non-destructive methods for field assessment of wood biodeterioration in hardwood trailer decks exposed to tropical environments
2025 - IRG/WP 25-41039
Apitong (Dipterocarpus spp.), an increasingly rare tropical hardwood from the rainforest in Southeast Asia, has long been used as decking materials for open-bed trailers and trucks across North America. As the natural population of Apitong trees steadily declines, there is an urgent need to find sustainable, domestically sourced alternatives for trailer decking. A recent project evaluated the perf...
X Wang, X Xie, G Kirker, C A Senalik
Considerations on how different preservation processing methods of logs would have different effects on wood structures
2025 - IRG/WP 25-41040
Azekura-zukuri style wood structures (hereinafter referred to as azekura-style structures) have been utilized in forest conservation projects in Japan as substitutes for concrete structures. We estimate that making use of thinned and small logs for azekura-style structures has positive impact on circular economy and carbon fixation and contributes to the biodiversity within their areas. In additio...
Y Iijima
Development of an Early Degradation Diagnosis Technology for Wood Coatings Using Mid-Infrared Spectroscopy and Machine Learning
2025 - IRG/WP 25-41047
Accurately predicting the degradation state of wood coatings is challenging, and as the coating deteriorates, it becomes a major factor accelerating the degradation of the wood itself. In this study, we aimed to develop a diagnostic technology that combines mid-infrared spectroscopy and machine learning to assess latent coating degradation, which cannot be detected visually, and to enable appropri...
K Nishimura, T Ito, S Isaji, T Takano, H Ohki, Y Teramoto
Proposal for New Evaluation Criteria for Exterior Products to Achieve a Circular Economy
2025 - IRG/WP 25-50408
In recent years, the development of laws related to the promotion of wood use in buildings in Japan has led to a significant increase in wood demand, resulting in the widespread use of various wood materials in construction. In this context, the use of preservative-treated wood, selected based on the principle of using the right material in the right place, has been emphasized. However, a systemat...
K Murakami, T Fujii, Y Iijima, T Hikiji