Your search resulted in 104 documents. Displaying 25 entries per page.
Determination of Equilibrium Moisture Content (EMC) of wood in the neighboring Countries of Iran
2011 - IRG/WP 10-40540
The mean value of annual temperature and relative humidity of 33 cities in Azerbaijan, Armenia, Turkmenistan, Afghanistan, Pakistan, Oman, United Arab Emirates, Bahrain, Qatar, Kuwait, Iraq and Turkey were determined using climatic data of the past 11 years. The EMC values were calculated using the Hailwood-Horrobin sorption model and its annual fluctuation, together with Temperature and relative humidity, were determined. The results indicated that EMC Values in the cities were ranged from 5.6% to 15.6%. Comparing annual temperature, relative humidity and EMC curves of these cities and conducting statistical analyses, the cities were classified into five groups with mean EMC values of 6.6, 8.6, 10.6, 12.6 and 14.6 percent. Thus, the results showed that EMC of the cities were below or equal to the allowable moisture content of wood and, wood products and the other hygroscopic materials(leather, textile and related products) in service except Bakoo in Azarbajan (EMC=15.6%). Therefore, if wood and wood products and related hygroscopic materials are processed within the range of the respective moisture content and exported to the neighboring countries of Iran, their quality and durability could be guarantied.
A A Enayati, H Z Hosseinabadi
Penichroa fasciata (Stephens) (Col. Cerambycidae) a pest in wood materials
1988 - IRG/WP 1365
Penichroa fasciata (Stephens) (Col. Cerambycidae) is found to be a frequent pest occurring in hardwood in storage in Italy. This paper reports the characteristic for identification, biological features, distribution and timber liable to attack.
A Gambetta, E Orlandi.
Summary of development of pile wrappings in Los Angeles Harbour
1987 - IRG/WP 4141
The resistance of painting materials and consolidants against wood-destroying insects
1997 - IRG/WP 97-10239
Natural and synthetic adhesives, varnishes, painting materials and consolidants were used in investigations of bioresistance against newly hatched larvae and beetles of Hylotrupes bajulus (L.). Animal glues, casein, drying oils and natural resins such as dammar resin and shellac, were not resistant to attack by these larvae. Similarly, semi- and all-synthetic polymers tested including hydroxypropylcellulose, acrylate and methacrylate compounds, are also subject to attack by newly hatched larvae of the House Longhorn Beetle. In contrast, addition of inorganic pigments provides a significant improvement in bioresistance. This effect is influenced by the thickness and the hardness of the paintlayer. The test with beetles of Hylotrupes bajulus show that the restoration materials which are not resistant against an attack by newly hatched larvae are preferred for the egg depositions by the females.
W Unger, H Fritsche, A Unger
Information from the COIPM Wood Group. Summary received via Mme Dr Anna Gambetta (Italy)
1987 - IRG/WP 4139
Two co-operative programmes were discussed: 1) The IRG/COIPM co-operative programme on the CCA/CCB wood treatments and 2) The IRG/COIPM co-operative programme for testing the resistance of plastic wrapping for wooden pilings. The following was reported: In the wood treatment programme, beech, pine and alstonia wood samples have been pressure treated with 3 retentions (3%, 6% and 10%) of CCA and CCB and exposed in the sea, to find out if these timbers have selective resistance to attacks by marine borers and fungi. After nearly 8 years of exposure at many different locations it is becoming apparent that both treatments in pine and alstonia provide better protection than both treatments in beech. It is hoped to find out after chemical analysis why this is happening. In the polyolefin tests this plastic material was heat shrunk around small wooden blocks and exposed to borer attack in many different marine environments, and also in some terrestrial environments where termites were present, to determine if the material prevents attack by the borers. At two stations the test is now in its eighth year. So far the polyolefin material is still intact and has not been penetrated by borers. These two programmes are continuing.
J R DePalma
Preliminary results of investigations on screening test of chemical compounds suitable for the preservation of lignocellulosic materials against biodeterioration
1976 - IRG/WP 262
This paper investigates the possibilities of reducing the time needed for the determination of the effectiveness of chemical compounds from the point of view of their eventual application to lignocellulosic materials for preservation against decay and soft-rot.
K Lutomski, S S Neyman
Mycological testing of plywood and board materials. Part 1: Review of information supplied by IRG members
1978 - IRG/WP 284
In December 1975 IRG members were asked for published information, information of current work in progress and views on mycological test methods for board materials. The object was to stimulate discussion and possibly establish a joint research effort within IRG in order to establish a meaningful test with reproducible results.
C R Coggins
Contribution to the testing of wood based board material
1982 - IRG/WP 2176
R G Lea
A collaborative test to determine the efficacy of polyurethane coatings on wood samples exposed in the marine environment
1984 - IRG/WP 4113
Aims are: a) to determine the effectiveness of elastomeric polyurethane as a protective coating against marine wood boring animals in a range of tropical and tempreate sites; b) to compare the adhesion of polyurthane coatings on different wood species exposed in seawater; c) to record the severity of attack in failed samples and to identify the causal marine organisms.
R A Eaton
Evaluation of polystyrene as a protective of wood in sea-water
1986 - IRG/WP 4129
A test is described on the biological protection of wood by treatment with polystyrene. The results, obtained in marine trials, after 18 months, show that the treatment with polystyrene is not all that effective in preventing the attack of marine borers.
Information from COIPM Wood Group
1985 - IRG/WP 4120
During the last COIPM Meeting (which took place in Athens, Greece in September 1984) the Wood Group met and discussed the co-operative work 'Durability in sea-water of wood with plastic wraps and wood treated with polymere'.
Results on termite resistance of building materials against Coptotermes formosanus by choice test
1998 - IRG/WP 98-10275
Various building materials, included wood species, wooden board materials, thermal insulation materials and fire-protection materials, were tested for grading of termite resistance against Coptotermes formosanus. The dimension of most specimens were 2x2x2cm3. Ten repeats were prepared. The specimens were put between Akamatsu sapwood control specimens on a laboratory cultured mound colony of termite, Coptotermes formosanus. After 1 month of attack to termite, the specimens were removed from the mound colony and cleaned up. Then these final mass were weighed. The grading of termite resistance was initially estimated by mass loss of specimens. This grading was corrected by visual observation. Japanese 3 domestic species, cypress pine, Alaska- ceder, kapur and mahogany were indicated rather high termite resistance. In the case of Siberian red pine and Gmelina, the valued of termite resistance were shown variable. Tropical species plywood, inorganic board and radiata pine MDF, were shown rather high termite resistance. Other board materials were shown rather less termite resistance. Most of commercial soft wood plywood and OSB were very sensible against termite. Most common thermal insulation materials in Japan were estimated very sensitive against termite. In the case of fire protection materials, expanded concrete was rather good against termite but plaster board was very sensible against termite.
K Suzuki, K Hagio
Durability of different heat treated materials from industrial processes in ground contact
2005 - IRG/WP 05-40312
In this study the durability of heat treated wood originating from four different European industrial heat treatment processes in ground contact was examined. The manufacturers of heat treated material were: PLATO Hout B.V./Netherlands, Thermo Wood/Finland, New Option Wood/France and Menz Holz/Germany where Oil-Heat treated Wood (OHT) is produced. All heat treated materials showed significantly increased durability against decay in ground contact compared to untreated Scots pine (Pinus sylvestris L.), independent from the different heat treatment processes. After four years of field testing, heat treated material appears to be not suitable for in ground contact application, since long service life is required. In analogy to the classification of natural durability (EN 350-1, 1994), durability classes in the range from 2 (durable) to 4 (slightly durable) were achieved by the different heat treated materials. This stands in contrast to statements of suppliers, who promote their material as suitable for in ground applications.
C R Welzbacher, A O Rapp
Decay resistance of high performance biocomposites based on chemically modified fibres
1998 - IRG/WP 98-40120
Different partners within the framework of a European research project produced high performance biocomposites aiming at the utilisation of board materials as durable products both in dimensional and biological degrading circumstances. This paper summarises test data, which indicate the potential of board materials produced with modified fibre material. The chemical modifications applied cover a range of technologies, which were selected for scaling up experiments. Acetylation, as well as alternative methods like maleiation, phthalylation, succinylation, oxidation and silylation were investigated. Fibre source, density variation and the use of several types of glues were parameters of the total set-up. Basidiomycete testing was carried out using specific methodology for board materials elaborated in CEN standardisation committees.
V Rijckaert, J Van Acker, M Stevens
A collaborative test to determine the efficacy of poyurethane coatings on wood samples exposed in the marine environment. 1st Interim Report
1988 - IRG/WP 4145
Wood samples coated with elastomeric polyurethane (ca. 50 mils thick) were exposed for up to 2 years in 12 tropical and temperate marine test sites with known teredinid, pholad and/or crustacean infestations. All uncoated control samples were destroyed or partially destroyed. Polyurethane-coated samples were not attacked, the surfaces of the coating were sound and the polyurethane adhered well to the wood samples.
R A Eaton
Plastic-coated marine piling in Los Angeles Harbour
1984 - IRG/WP 4105
Work program of CEN/TC 38 (April 1993). Durability of wood and wood-based products
1993 - IRG/WP 93-20012
A review of environmental emissions from building and construction materials in comparison with preserved wood
2005 - IRG/WP 05-50224-11
A review of the public domain literature concerning emissions to the environment from materials which are used in the construction of buildings (e.g. Concrete, Asphalt, Galvanised Steel), in comparison with preserved wood, and a review of the approaches taken by the construction sector in assessing the risk from environmental emissions, in comparison with the approaches taken by the wood preservation sector.
E F Baines
Work program of CEN/TC 38 (January 1994). Durability of wood and derived materials
1994 - IRG/WP 94-20019
Use of the Pilodyn to assess deterioration of treated aspen waferboard after 30 months of outdoor exposure
1986 - IRG/WP 2254
Samples of preservative treated aspen waferboard exposed outdoors for 30 mo. were compared using pin penetrations of the 6 Joule Pilodyn. These results correlated well with rankings of treatment performance based on more laborious standard mechanical tests, and demonstrate the potential for use of the Pilodyn as a tool to evaluate wood composites in test exposures with minimal destruction.
E L Schmidt, M G Dietz
Acetylation of lignocellulosic materials
1989 - IRG/WP 3516
A simplified procedure for the acetylation of lignocellulosic materials has been developed. The acetylation is done with a limited amount of liquid acetic anhydride without the addition of a catalyst or an organic co-solvent. Dimensional stability and biological resistance are both much improved by the acetylation. Equilibrium moisture content in acetylated material is considerably lower than in unmodified material. No reduction of bending strength was found for acetylated solid wood samples. The process can be employed for both fibers, wood particles and solid wood. The process is applicable to hardwoods and softwoods, including solid spruce wood, and to non-wood fibers such as jute.
P Larsson, A-M Tillman
Information from the COIPM Wood Group
1986 - IRG/WP 4130
The Chairman outlined the progress of the co-operative work "testing the resistance to marine borers of heat shrinkable polyolefin sheathings and of wood treated by vacuum/pressure with polymers (polystyrene)". The first part of the work has been started: the samples of wood wrapped with shrinkable polyolefin sheathings have been prepared and sent to the stations participating. The second part of the programme has for the moment been stopped because in some preliminary trials samples treated with polystyrene have shown a light to moderate attack by molluscan and crustacean borers after 18 months' immersion. The results of these trials have been related and supported by photos and X-ray pictures. Four other stations are involved in this programme: three have been made available by Hempel Technology in Copenhagen (Denmark) and one by CNEXO (France). A presentation was given of the project for a European Standard "Field test method for determining the protective effectiveness of a preservative in the marine environment" which had been prepared by Professor Björn Henningsson (Sweden) and considered in the CEN meeting in September 1985. The participants were informed of the research being carried out by the IRG Marine Wood Preservation Group and the minutes of the 12th Meeting held in Brazil during May 1985 were presented.
Review of Mold Issues in North America and Mold Research at Forintek
2003 - IRG/WP 03-10458
Over the last decade, air quality in homes and workplaces has become a high profile issue especially in relation to mold, receiving considerable media, public and legal attention. Forintek Canada Corp. and the wood industry in general have experienced large increases in inquiries regarding mold and the suitability of wood as substrate for its growth. Because wet wood supports growth of fungi the public perceive wood used in building envelope as a major source of mold and this can affect wood’s image in markets and could be exploited by competitor industries. Forintek reviewed the existing and relevant information about mold, substrates that support its growth and the health issues associated with mold and water damaged buildings. Several projects and collaborative efforts with other groups have been initiated to deal with recognized knowledge gaps. This paper covers the history of mold hysteria, recent statements by authorities on mold and health and summarizes some of Forintek’s recent work. This includes: survey of mold and staining fungi on KD lumber; database of literature on mold, building materials and health; limiting conditions for mold growth, hidden mold and its movement into living spaces and a lab test method for mold resistance of wood products.
A Uzunovic, A Byrne, Dian-Qing Yang, P I Morris
Treatment of wood-based panel products with volatile borate
1990 - IRG/WP 3616
The paper presents recent developments in the use of volatile borate esters for the preservative treatment of wood based board materials. Several advances on previous reports are discussed. In laboratory studies, treatment times of approximately ten minutes at 20°C on boards at equilibrium moisture content provided full penetration and retentions of 1% wt/wt boric acid. Biological tests have been conducted on a wide variety of boards treated by the vapour boron method. In all cases a retention of 0.7% wt/wt boric acid gave complete protection from decay. These results are considered with regard to parallel studies on solid wood by colleagues at the Forest Research Institute, Rotorua. The advantages of vapour boron treatment for wood based board materials are discussed.
P Turner, R J Murphy, D J Dickinson
SEM investigation of the production of extracellular mucilaginous material (ECM) by some wood inhabiting and wood decay fungi when grown in wood
1997 - IRG/WP 97-10193
Previous reports have illustrated the involvement of extracellular mucilage (ECM) in wood decay by Basidiomycetes. Its production is investigated in a range of stain, mould and soft rot fungi in Corsican pine, Scots pine and European beech. Fungi examined were: Chaetomium globosum, Ceratocystis coerulescens, Trichoderma harzianum, Ophiostoma piceae, Mucor sp. and Penicillium. sp. The samples were examined in the frozen hydrated (FH) and freeze dried (FD) conditions using SEM. Most of the fungi tested produced ECM with the amounts produced varying from one fungus to the other. Different morphological forms of the mucilage were observed. ECM produced by C. coerulescens was mostly fibrillar, and interesting morphological forms of the ECM were associated with hyphae of T. harzianum. Small amounts of mucilage were produced by O. piceae and Penicillium sp. Further investigation is necessary on the ECM production in Mucor sp.
A R Abu, D J Dickinson, R J Murphy