Your search resulted in 489 documents. Displaying 25 entries per page.
Durability of acetylated beech (Fagus sylvativa L.) laminated veneer lumber (LVL)
2024 - IRG/WP 24-30807
Beech (Fagus sylvatica L.) is one of the most abundant hardwood species in Germany and other European countries. It has been demonstrated as suitable raw material for structural products, like laminated veneer lumber (LVL). However, the use of these products is typically restricted to interior applications due to its high susceptibility to weathering and biological attack. Therefore, acetylation w...
M Slabohm, H Militz
Evaluation of vacuum borate treated spruce or pine CLT in an above ground protected test in southern Mississippi
2024 - IRG/WP 24-41001
Cross laminated timber (CLT) has become a popular wood composite in large building applications that were previously limited to concrete and steel. To extend service and prevent biological attack, chemical protectants are often applied to wood. Cross laminated timber panels are not typically treated, in part due to a lack of data on efficient and effective methods for treating large panels. Ther...
M E Mankowski, A Taylor, G T Kirker
Assessment of historical pilings from Lisbon
2024 - IRG/WP 24-41004
The renovation and rebuilding of areas in Lisbon has led to work on buildings constructed in the Pombaline downtown district. These buildings were constructed on wooden pilings, as a means of stabilising unstable soils and transfer the loads from buildings to soils with adequate bearing capacity. These methods also increased the resilience of the reconstruction works to future possible earthquakes...
D Jones, S Duarte, J A J Huber, L Nunes
Evaluating the potential for re-using timber from deconstructed sea defence groynes from the Bournemouth groyne field
2024 - IRG/WP 24-50397
In the shadow of a looming climate crisis, the modern age construction industry is evolving. The for implementing sustainable practices has never been greater and the potential role of the circular economy is front and centre. It can play a pivotal role in transforming the industry by promoting sustainable practices which emphasise the need to reduce consumption of natural resources. Re-using timb...
J R Williams
Timber circularity discussion: Waste hierarchy and prioritising reuse opportunities!
2024 - IRG/WP 24-50398
By following the waste hierarchy and prioritising reuse opportunities first before resorting to disposal in landfills, we can effectively sustainably manage timber resources. This approach helps to conserve natural resources, reduce energy consumption, minimize greenhouse gas emissions, and minimize the overall environmental footprint associated with timber production and disposal. It also promote...
T Singh
Fungal degradation of oak timber bridges
2025 - IRG/WP 25-11058
Wood is increasingly recognised as an eco-friendly building material, but its organic nature makes it vulnerable to degradation, especially in outdoor applications exposed to moisture. This study investigates wood-decaying fungi affecting oak timber bridges in Hanover, Germany. The study aimed to identify the fungal species using culture-independent methods and to examine the impact of poorly exec...
L Schrader, J Trautner, C Brischke
Performance of Chromated Copper Arsenic Treated and Untreated Papua New Guinea Timber Species in Marine Exposure after 95 weeks (664 days)
2025 - IRG/WP 25-11062
A Masters’ thesis on the topic was successfully completed and submitted in September 2024. The thesis reports on results obtained from exposure of five Papua New Guinea (PNG) timber species (obtained from secondary growth or plantation grown) after 218 days (31 weeks) in a marine environment in sub-tropical Queensland, Australia. The species studied were: Hopea iriana (Hopea, heavy), Vitex cofas...
E Galore, J Norton, T Singh
DURALARCH – Suitability of selected coloured coniferous heartwoods of different origin for their use in outdoor applications
2025 - IRG/WP 25-11064
For outdoor above-ground applications with high demands on biological durability, there are only a few softwoods available that also have high density and strength characteristics. One of the most important timbers with these material properties is Siberian larch (Larix sibirica, Larix gmelinii), which is available in sufficient quantities due to its large distribution area. Imports of Siberian la...
C Brischke, J Appelt, G Koch, S Majer, M Nopens, R Stirling, D Wong
The iTrussT project – Advancements in timber bridge design, preservation, and monitoring
2025 - IRG/WP 25-20751
The Norwegian research project iTrussT (2025–2028) aims to advance timber bridge design and unlock wood’s full potential as a sustainable solution for modern infrastructure. It addresses three critical challenges: First, fatigue testing of glued laminated timber lamellae will provide deeper insights into shear failure mechanisms, supporting the development of safer, more efficient structures a...
K-C Mahnert, U Hundhausen
Effect of Deep Eutectic Solvent Pretreatment on Properties of Densified Wood
2025 - IRG/WP 25-30824
Densified wood is preferable for structural applications because of its excellent mechanical properties and sustainability, but the fixation of its compression deformation and the prevention of water-induced mechanical deterioration remain challenging. Herein, an eco-friendly and highly efficient method was designed for producing dimensionally-stable densified wood, including deep eutectic solvent...
Y Ran, W Wang, J Cao
Hyperspectral imaging in qualitative and quantitative assessment of biocide treated timber
2025 - IRG/WP 25-50407
A hyperspectral camera operating in the shortwave infrared light range between 1000 – 2500 nm was used to collect spectral profiles of timber treated with different biocides and varying concentrations of a copper-ethanolamine based wood preservative. The spectra were analysed using statistical methods like principal component analysis, linear discriminant analysis, and partial least squares to a...
J Levanič, E Keržič, B Lesar, M Humar
Timber reuse and circularity: Insight from Norway's SirkTre and CircWOOD initiatives
2025 - IRG/WP 25-50409
Timber is central to the EU’s decarbonisation strategy, particularly in the building sector, which faces challenges related to climate adaptation, resource constraints, and rising costs. The four-year SirkTRE project aims to improve circularity in the timber industry by developing standards, promoting reuse, and expanding market opportunities. A key focus of SirkTRE is to increase the longevity ...
K Nore, L Ross
Leveraging Geospatial Mapping for Timber Circularity in Australia
2025 - IRG/WP 25-50410
Timber, renowned for its low embodied carbon and renewable characteristics, is a prime candidate for integration into the circular economy. However, challenges arise in the reuse, repurposing, and recycling of chemically treated materials. The National Centre for Timber Durability and Design Life (NCTDDL) at the University of the Sunshine Coast (UniSC) is leading a collaborative initiative with Fo...
T Singh, P Mitchell, M Strandgard, M Harris
Wood Protection in the Tropics: A Necessity in the Face of Climate Change and Rising Demand for Wood Products Consumption
2025 - IRG/WP 25-50413
With the rising demand for forest products due to population growth and continuous expansion of tropical countries’ economies. Therefore, the need for judicious use of forest products in the advent of climate change to meet the needs of the people cannot be downplayed but serve as a clarion call to conserve and improve the use of forest products for longer services. My talk will highlight the st...
M Nurudeen Iddrisu