IRG Documents Database and Compendium

Search and Download IRG Documents:

Between and , sort by

Displaying your search results

Your search resulted in 110 documents. Displaying 25 entries per page.

Preservative treatment of wood by diffusion processes - Simulation of commercial treatment processes
1988 - IRG/WP 3498
Spruce (Picea abies), Scots pine (Pinus sylvestris) and birch (Betula pendula) were preservative treated by diffusion with mixtures of copper sulphate and arsenic pentoxide. The preservative was fixed after a suitable diffusion storage period by soaking in ammonia solution. A high standard of treatment could be achieved in spruce sapwood. This was attributed to its low wood density, and high wood moisture content. The variable treatability of spruce heartwood and poor treatability of Scots pine heartwood was related directly to their moisture-content. Complete preservative penetration could be achieved in spruce heartwood when moisture contents were 60% or above whereas Scots pine heartwood with a fresh moisture content of 30% was untreatable by diffusion. Preservative penetration was directly related to preservative retention and immobilisation by fixation. This was demonstrated clearly for birch which because of its high basic wood density tended to immobilise a greater quantity of preservative salt per unit volume. The effects of preservative retention and diffusion storage time on the subsequent distribution of preservative was determined for Pinus ponderosa. The relationships established can be used for defining suitable diffusion treatment schedules.
P Vinden

A discussion on causes, effects and remedies of arsenic pollution of groundwater in Bangladesh
1998 - IRG/WP 98-50102
This paper includes possible causes, effects and remedies of arsenic pollution of groundwater in Bangladesh, extracted mostly from the international conference held in Dhaka in 1998. Next possible key steps have been suggested based on scientific principles and experience. The release of arsenic from underground sediment would be due to excessive mechanical forces, geochemical and geobiological reactions. Arsenic free water will cure acute patients and will save future generations. Use of suitable organic chemicals, organic matters, biological control system would be widely acceptable for supplying arsenic free water. Other natural sources of water can be used easily and safely without mechanical and chemical processes. The problems of chronic patients would be solved genetically, enzymatically and nutritionally.
A K Lahiry

Electrodialytic remediation of creosote and CCA treated timber wastes
2002 - IRG/WP 02-50190
There is a growing concern about the environmental issue of impregnated timber waste management, since an increase in the amount of waste of treated wood is expected over the next decades. Presently, no well-documented treatment technique is yet available for this type of waste. Alternative options concerning the disposal of treated wood are becoming more attractive to study, especially the ones that may promote its re-use. Inside this approach, the electrodialytic process (ED) seems a promising technique for removal of preservative chemicals from treated wood waste. The method uses a direct electric current and its effects in the matrix as the “cleaning agent”, combining the electrokinetic movement (mainly due to electromigration, but also electro-osmosis and electrophoresis), with the principle of electrodialysis. This work reports results from the application of the electrodialytic process to an out-of-service Portuguese creosote and CCA-treated Pinus pinaster Ait. railway sleeper and pole. The behaviour of the process is described and the main results discussed. The average removal rate, estimated in accordance with prEN 12490, for creosote from treated timber waste was around 40 %.. For CCA treated timber waste, experimental conditions that could optimise the process efficiency (e.g. current density, time) were studied. The highest removal rates obtained until now, in our studies, were 93 % of Cu, 95 % of Cr and 99 % of As for sawdust using 2.5 % oxalic acid (w/w) as the assisting agent. For CCA treated wood waste in the form of chips, the best removal rates obtained until now were 84 % of Cu, 91 % of Cr and 97 % of As.
E P Mateus, A B Ribeiro, L Ottosen

Insect resistance of preservative treated tropical plywood against Lyctus
1990 - IRG/WP 1453
Seven plywood types composed of tropical wood species, vulnerable to Lyctus, were treated with various commercial water-borne and oil-borne preservatives. A wide range of preservative retentions was obtained by treating boards with dip treatment, steeping, double-vacuum and vacuum-pressure impregnations. Selected samples were subsequently tested for their insect resistance against Lyctus africanus during 6 to 8 months according to European Standard EN 20. All control samples were attacked, except one Obeche plywood exhibiting only 50% attack. Water-borne preservative solutions containing arsenic, boron or fluoride could not prevent attack at common retention levels for interior use e.g. lower than 5 kg/m³. Quaternary ammonium compounds showed no insecticidal efficiency, up to 3 kg/m³. TCMTB at 1.5-1.7 kg/m³ proved to be able to reduce slightly the susceptibility for insect attack. Organic insecticides gave the best results, with nearly no attack for plywood treated with lindane or cypermethrin. In spite of a preservative uptake of 25 to 30 kg/m³, endosulfan only could reduce attack by 50%. Protection by permethrin at 0.1% a.i. required a retention of 28 kg/m³. Besides the fact that variability in wood species and composition of the plywood are leading to different retention levels, variation in penetration and distribution of a.i., and as a consequence to a different insect resistance of the impregnated boards, some poor results were directly related to inadequate insecticidal activity and/or concentration of a.i. in some commercial formulations for Lyctus control.
J Van Acker, M Stevens, M Pallaske

An investigation of the effects of pre-steaming on the treatment of sawn spruce timber with Celcure A, a copper-chrome-arsenic preservative
1981 - IRG/WP 3150
Difficulties in the treatment of spruce using standard vacuum/pressure techniques with both water-borne and organic solvent preservatives are well known. We have evaluated the influence of steaming on treatability with a waterborne CCA preservative.
C R Coggins

La rôle de l'expert dans l'évaluation toxicologique
1990 - IRG/WP 3589
C Boudene

Proposed test procedure to determine the effect of timber substrate on the effectiveness of a copper/chrome/arsenic preservative in seawater
1975 - IRG/WP 411
R A Eaton

X-ray analysis of selected anatomical structures in copper/chrome/arsenic treated wood
1973 - IRG/WP 320
Application of analytical electron microscopy to problems in wood preservation has been very limited. Indeed, less than ten workers appear to have published their results using the technique, and of these' only two papers deal with energy dispersion procedures in the scanning electron microscope; the others employ the more familiar wavelength dispersive methods of the electron probe.
H Greaves

Leaching of copper, chromium and arsenic from CCA-treated Scots pine exposed in sea water
2000 - IRG/WP 00-50149
A laboratory leaching trial combining a static and a flowing seawater system was carried out to measure the leaching rates of copper, chromium and arsenic from the surface of Scots pine panels vacuum-pressure treated to 3, 6, 12, 24, and 48 kgm-3 CCA. Untreated and treated panels were exposed in flowing seawater for up to 8 weeks followed by 2 weeks submersion in static seawater which was taken for analysis. The study revealed a leaching hierarchy of Cu>Cr>As which supports the findings of other investigators. Over the 8 week leaching trial there was a time-related decrease in the rate of copper and chromium loss. Over the first week of leaching in flowing seawater, the rates of loss of copper and chromium decreased to between one-half and one-seventh, followed by lower rates of leaching over the remaining period of the investigation. In contrast, the rate of loss of arsenic from the wood appeared to increase slightly over the same period. The data are compared with minimal leaching rates of toxins from the surface of anti-fouling paints and are discussed in terms of the fouling communities which are established on Scots pine panels treated to similar target retentions.
C J Brown, R A Eaton

Improved PEC preservatives with added biocides
1985 - IRG/WP 3322
Biocidal chemicals have been incorporated into formulations within the broad framework of pigment emulsified creosote (PEC) to provide novel potential multi-purpose preservatives. Preparations of PEC plus TCMTB, Boracol 40, copper ethanolamine nonanoate, Quatramine 80, arsenic trioxide, Troysan Polyphase, and CCA have been formulated and assessed for preserving ability in soil-jar and Accelerated Field Simulator tests. In addition, a cationic oil-in-water emulsion preservative combination of PEC and CCA (PECCA), and an anionic formulation of TCMTB with PEC (PECBUS) have been manufactured in 400 L quantities to treat hardwood pole stubs and pine posts. The results indicate the potential of these improved second generation PEC-based preservatives to provide low-creosote containing treatments able to protect commodities against biodeterioration as well as provide dry, clean surfaces.
H Greaves, C-W Chin, J B Watkins

An introduction to environmental aspects of groundwater arsenic and CCA treated wood poles in Bangladesh
1997 - IRG/WP 97-50081
The environment comprises biosphere, lithosphere, atmosphere and hydrosphere. Therefore, environmental science is a multi-disciplinary study, includes life sciences, physical sciences, chemical sciences, geology, geography, meteorology, forestry, agriculture, soil science, hydrology, ecology, public health, engineering etc. Tremendous industrial and mining activities, deforestation and population explosion are threatening the very existence of life on earth.Groundwater is used for irrigation, drinking and other domestic purposes where other sources of water are not plenty. Groundwater contain different metals resulting from soluble minerals, deposited in ground during its origin. Thus concentration of metals in surface soils and water are increased day by day by lifting of groundwater. Surface soils and water also receive metals from industries and mines and as a result of multipurpose use of products from those. Deforestation is controlled by plantation and preservation of forest products by different wood preservatives. Recently groundwater in some underground rocks of Tertiary and Quarternary age in Bangladesh is very often known to contain arsenic (As) above permissible limits . On the other hand chromated copper arsenate (CCA) impregnated wooden poles has been used for rural electrification in Bangladesh since 1979. It is an attempt to find out through research and review of literatures that whether the groundwater As is contaminatable from As used in wood poles and whether the components of CCA cause environmental problems. Possible way of purification of arsenic containing groundwater for drinking have been suggested.
A K Lahiry

Treatment of messmate (Eucalyptus obliqua L'Hérit) by double-diffusion: Preliminary report
1983 - IRG/WP 3234
Modified double-diffusion is suggested as a method of impregnation for mixed tropical hardwoods for certain types of ground contact use in less developed countries. Compared with vacuum/pressure impregnation, capital costs are low and little skill is needed for the operations involved. Treatment of messmate (Eucalyptus obliqua L'Herit) rounds involving pre-heating in water prior to their immersion in the first stage solutions is described. Preliminary indications are that (i) there is a deeper penetration of arsenic when a compound of this element is used in the first stage solution (ii) a more even and deeper penetration of chromium is obtained when sodium chromate, rather than sodium dichromate, is used in the second stage solution. It is concluded that quality control in double-diffusion may be a limiting factor in the adoption of the process for the treatment of wood unless a simple but effective method is found to control solution concentrations and elemental ratios.
F F K Ampong, C-W Chin

Answers to the questionnaire on Gloeophyllum trabeum ( = Lenzites trabea)
1972 - IRG/WP 107
In the Working Group I of the IRG it was agreed to prepare monographic cards of wood destroying fungi. In first instance three fungi, amongst which Gloeophyllum trabeum, were chosen to start with. A questionnaire was drawn up by Prof. C. Jaquiot and the members of the IRG were asked to give information on Gloeophyllum trabeum in accordance with this questionnaire. The results of this enquiry are given in this report.
T Hof

A new accelerated field test for termites
1983 - IRG/WP 1178
A new accelerated field test method for termites is described. Two series of tests were conducted with this accelerated method and the results were very encouraging.
W E Conradie, A Jansen

Lignin-copper, a new wood preservative without arsenic and chromium
1992 - IRG/WP 92-3702
A more environmentally sound treatment for wood with preservatives containing no arsenic or chromium, has been developed and studied on a laboratory scale. The method involves a first step impregnation with an aqueous solution containing modified, water-soluble kraft lignin followed by a second step involving impregnation with a copper salt solution to give fixation of the lignin into a water-insoluble form and to achieve complementary protection. The two steps can be performed without intermediate drying of the wood in a conventional reactor for vacuum-pressure impregnation. The treatment has been shown to give good protection against degrading fungi, tunnelling bacteria and termites, and a lower growth of mould on the wood surface. Field tests (NTR test) indicate, after 4 years of exposure, very good protection gained by this new treatment. Fibre and particle boards made from wood fibres and wood particles, treated with this method show increased dimensional stability and rot resistance.
B Ohlsson, R Simonson

Assessment of contamination of soil and water at a CCA treatment plant: A demonstration project
1996 - IRG/WP 96-50067
Soil, sludge, dust and water samples were collected at a copper/chromium/arsenic wood preservation plant. Contamination of soil, sludge, dust and surface water with copper, chromium and arsenic was detected. Levels of contamination were sufficiently high to require remediation. Contamination originated from preservative solution dripping from recently treated wood. Migration of contaminants was via surface water run-off; poor housekeeping and operational procedures; forklift movements and wind-blown dust.
P N Durrant, D C R Sinclair, G M Smith

Fungal degradation of wood treated with metal-based preservatives. Part 2: Redox states of chromium
1996 - IRG/WP 96-10164
Concerns have arisen about the leaching of heavy metals from wood treated with metal-based preservatives, such as chromated copper arsenate (CCA). Of particular concern is the toxic redox state of chromium and arsenic in aging and decayed CCA-treated wood. Generally, hexavalent chromium is more toxic than trivalent chromium and trivalent arsenic is more toxic than pentavalent arsenic. The desired outcome from treating wood with CCA is total change of Cr(VI) to Cr(III) and As(III) to As(V). As part of an on-going study to determine the fate of copper, chromium and arsenic during aging and decay of CCA-treated wood, we detected Cr(III) and Cr(VI) in situ in CCA-treated southern yellow pine lumber. The redox states of Cr were determined using synchrotron X-ray fluorescence spectroscopy (SXRF). An SXRF microprobe was used to to detect Cr redox states by measuring X-ray absorption near-edge structure (XANES). The ratio of Cr(III) to Cr(VI) was determined (1) on the surface and interior of lumber two years after CCA treatment and (2) in lumber during decay by a CCA-tolerant fungus, Meruliporia incrassata TFFH-294. The XANES spectrum for Cr(VI) has a strong pre-edge feature that is not present in the spectrum for Cr(III). Only the Cr(III) XANES spectrum was detected on the surface and in the interior of the wood, indicating total reduction of Cr(VI). The XANES spectrum for Cr(III) was detected in wood after 12 week decay by Meruliporia incrassata TFFH-294, indicating that the fungus does not oxidize Cr(III) to Cr(VI) during the decay process. We are currently using XANES spectroscopy to detect and map in situ redox states of As in CCA-treated wood.
B Illman, S Bajt, T L Highley

Literature survey on the permanence and distribution of salt-type wood preservatives
1969 - IRG/WP III 1B
The objective of this survey is generally to review some of the more important published work dealing with the distribution and permanence of salt-type waterborne wood preservatives in treated timber. The survey is limited to the major chrome-containing formulations and the classification system proposed by Becker (1964) has been adopted throughout. CK - chromium, copper (copper, chrome); CKA - chromium, copper, arsenic (copper, chrome, arsenate); CKB - chromium, copper, boron (copper, chrome, boron); CFK - chromium, fluorine, copper (copper, chrome, fluorine); CFA - chromium, fluorine, arsenic (fluor, chrome, arsenate); CF - chromium, fluorine (fluor, chrome). The literature compilation covers the performance of these preservatives assessed from laboratory tests, field tests and practical experience; their application and distribution in the treated wood; and their influence on materials such as glues, paints or metals and the wood itself. It is not the purpose of this survey to draw conclusions regarding the relative merits of the various formulations, the choice of a formulation in a given situation depending upon many factors outside the terms of reference of this review, and not all of a technical nature. In general, there is insufficient directly comparable data for a definitive assessment and in the few comparisons available special factors frequently apply.

Interaction mechanisms of F/Cr/As/B type preservative and wood
1981 - IRG/WP 3183
The paper reports results of investigations on the fixation of the components of a F/Cr/As/B preservative in wood and its lignin and cellulosic components.
N Ermush, I Andersone

A study of salt imbalances observed in recycled copper/chrome/arsenic preservative solutions in commercial practice
1987 - IRG/WP 3461
The study reported monitored tank solutions, sludge and other by-products using a standard CCA solution, when recycled. This recycling of the CCA solution is quite usual in between any commercial treatment schedules. Salt imbalances were observed and the possible reasons for such phenomena were studied. The paper discusses the procedure followed, the method of sampling the liquid after the charge and the analysis, to arrive finally at an aggregation and conclusion from the data.
V R Sonti, S Sonti, B Chatterjee

Justification for use of mirex in termite control
1988 - IRG/WP 1346
In August 1987, organochlorines were withdrawn in North America from use in termite control. This has left the industry and the community with reduced options in long term protection of wood and wood products. A case is presented to justify the use of the slow-acting stomach termiticide, mirex, under special permit, for use only in the bait-block method of termite control. This method, while not acting like the organochlorines as a chemical barrier around newly constructed and existing buildings will, however, offer an alternative control measure in eradicating subterranean termites when buildings become infested by these insects. Health and safety aspects are discussed.
J R J French

Fungi associated with groundline soft rot decay in copper/chrome/arsenic treated heartwood utility poles of Malaysian hardwoods
1992 - IRG/WP 92-1567
Copper-chrome-arsenic treated heartwood from Malaysian hardwood utility poles in service for 8-23 y at two localities in the wet tropical Peninsula Malaysia were surveyed for soft rot in the ground-contact region. Soft rot decay was detected in all the poles. Isolation studies indicated the ability of a variety of microfungi and basidiomycetes to colonize treated heartwood. Most isolates exhibited variable soft rot ability based on a combination of soft rot tests. A few of the isolates formed soft rot cavities (decay types 1 & 2) and belonged to genera previously found associated with soft rot decay. In particular, isolates of Chaetomium globosum and Phialophora occurred frequently on the surface of sampled poles, while Paecilomyces variotii occurred at all sampling depths from the wood surface. It appeared that soft rotting ability of selected isolates (determined from both mass loss and dilute alkali solubility of degraded native cellulose) was affected by the choice of incubation temperatures.
A H H Wong, R B Pearce, S C Watkinson

Water-borne preservative marine trials in Western Canada
1981 - IRG/WP 470
Red pine boards treated with chromated copper arsenate, ammoniacal copper arsenate, copper zinc arsenic additive, a modified ammoniacal copper arsenate, and zinc arsenic additive, have been installed in a marine field test at West Vancouver, British Columbia. After two and a quarter years exposure, all the test samples are in excellent condition with the exception of those treated with the zinc arsenic additive. All the zinc arsenic additive treated boards at the lowest preservative retention and two thirds of those at the second lowest retention in test have failed. A performance index calculated for the zinc arsenic additive indicates an added service life of 3% at the standard retention level.
J N R Ruddick

Disposal of CCA treated waste wood by combustion - An industrial scale trial
1996 - IRG/WP 96-50068
Totally 272 m³ (62.7 t) of CCA treated utility poles were chipped and incinerated at Jalasjärvi Gasification Plant. In average the whole batch of chips contained 57 kg of elementary copper, 95 kg chromium and 76 kg arsenic. During the 56 h combustion trial the measured arsenic emission to the air was 76 g in total. Copper and chromium emission was less than 1 g. The condensing water from the cooling unit and the ash from the gasifier were collected and transported to Outokumpu Harjavalta Metals Oy and finally circulated through a copper refinery line.
A J Nurmi

Leaching of copper, chromium and arsenic from CCA-treated slash pine heartwood
1994 - IRG/WP 94-50020
Drying green slash pine with any of three high temperature drying schedules produced a product in which both the sapwood and the heartwood could be penetrated with CCA using a modified Bethell treatment schedule. Required H3 retentions were achieved in both sapwood and heartwood, from 200 litres per m³ charge uptake. Post-treatment fixation/drying was accomplished by three different regimes, including an accelerated fixation. Although acceptable preservative penetration and retention was achieved in the heartwood, arsenic fixation (as determined by both AWPA procedure E11-87 and U.S. EPA TCLP procedure) was inferior to that attained in the sapwood. TCLP leachates from 1 cm³ heartwood blocks contained up to 4.5 mg/l arsenic, very close to the maximum value (5.0 mg/l) currently permitted in Australia for arsenic waste disposal. Though there are clear advantages in achieving heartwood penetration, caution must be exercised to ensure that this step does not compromise the accepability of the product. No process modification could be accepted if it introduced possibilities of exceeding safe disposal limits for sawdust and offcuts, or building site contamination.
M J Kennedy, G Palmer

Next Page