Your search resulted in 159 documents. Displaying 25 entries per page.
Proposed methodology for the assessment of safety indexes
1990 - IRG/WP 3562
Safety Indexes (SI)s are developped on the same concept as Efficacy Indexes (EI)s: EIs are retentions of wood preservatives (percentages of the critical values "efficacy") which are presumed efficient for a given biological class of risk. In the same way, SIs are retentions of wood preservatives (percentages of the critical values "safety") which are taken as acceptable for human health and the general environment. EIs and SIs as well are derived from different types of bioassays and related to objectives of quality which may be either regulatory or harmonized within the programmes of the Standard Committees (CEN TC/38 for example). Critical Values are characteristics of wood preservatives; EIs and SIs are characteristics of treated wood; they vary with the different classes of risks.
Preliminary study of the fungicidal and structural variability in copper naphthenates and naphthenic acids
1996 - IRG/WP 96-30114
Copper naphthenates, an oil-borne wood preservative listed by the American Wood-Preservers' Association (AWPA), is manufactured by complexing copper(II) with naphthenic acids. Prior to AWPA listing as a wood preservative, field experiments showed that copper naphthenates generally had good stability and were active against wood-destroying organisms. Recently, however, there have been reports of some copper naphthenate-treated poles rapidly failing. One possible explanation for the varying effectiveness could be that the structure, and resulting biological activity, of the naphthenic acids used to make copper naphthenate may vary. To test this hypothesis several naphthenic acids and copper naphenates were obtained and their fungicidal activity against three wood-destroying fungi measured. In addition, the chemical structure of the naphthenic acids were examined by proton- and carbon- NMR. Different activities were observed, especially against a copper-tolerant fungus. Some apparent correlations were seen between the fungicidal activity and chemical structures for the few samples studied.
T Schultz, D D Nicholas, L L Ingram Jr, T H Fisher
Copper naphthenate performance: A new way to look at old data
2000 - IRG/WP 00-30215
Although copper naphthenate has over a 50-year test history, it is still considered as a "new" preservative in the United States when it is used for utility poles. It has also been extensively used in remedial treatments for poles and has considerable retail or over-the-counter sales. The test history includes a number of different tests and a rationale for evaluating this data and comparing the performance of copper naphthenate to other common pole preservatives is presented. Thus, the efficacy of copper naphthenate can be easily summarized.
C R McIntyre
The evaluation of synergistic effects of chemicals on fungicidal efficacy in crossed-paper tests
1991 - IRG/WP 2383
The mixing effects of wood preservatives were evaluated using the crossed-paper technique. Two filter paper strips (0.7 x 8 cm²) were treated by soaking with different chemicals [fungicides, a termiticide (chlorpyrifos or phoxim), a surface-active agent, a synergistic agent, and a stabilizer], and placed at right angles to each other on a fully grown mycelial mat of a test fungus in a Petri dish. When the four organoiodine fungicides were incorporated with chlorpyrifos or surface active agent, only 3-iodo-2-propynyl butyl carbamate (IPBC) showed the desirable synergistic effect against every wood-decaying fungus tested. Other fungicides did not always tend to produce the synergistic effect with the addition of a surface active agent. 4-Chlorophenyl-3-iodopropargyl formal (IF-1000) appeared to indicate an undesirable antagonistic effect when mixed with either chlorpyrifos or a surface active agent. 3-Bromo-2, 3 diiodo-2-propenylethyl carbamate (EBIP) did not show any synergistic action by mixing with chlorpyrifos and/or a surface active agent, although the fungicidal enhancement was induced satisfactorily by mixing the fungicide with chlorpyrifos, a stabilizer and/or a synergistic agent, especially against Tyromyces palustris and Coriolus versicolor. Similarity of the results obtained in the present investigation and in the previous laboratory decay tests leads to the conclusion that the crossed-paper technique is suitable for the evaluation of the mixing effect of chemicals on fungicidal efficacy.
Dong-heub Lee, K Tsunoda, M Takahashi
Boron treatments for the preservation of wood - A review of efficacy data for fungi and termites
1994 - IRG/WP 94-30037
Boron treatments have been used for many decades for protection of timber from biological attack and also as a fire retardant treatment. In recent years there has been an increased interest in boron treatments as an option for protection of structural timbers' e.g. timber framing used in termite risk areas. This paper reviews efficacy data for both fungi and termites relevant to this end-use.
J A Drysdale
A collaborative test to determine the efficacy of polyurethane coatings on wood samples exposed in the marine environment
1984 - IRG/WP 4113
Aims are: a) to determine the effectiveness of elastomeric polyurethane as a protective coating against marine wood boring animals in a range of tropical and tempreate sites; b) to compare the adhesion of polyurthane coatings on different wood species exposed in seawater; c) to record the severity of attack in failed samples and to identify the causal marine organisms.
R A Eaton
A wood preservative for the future: Copper dimethyldithiocarbamate
1994 - IRG/WP 94-30045
The development of a new wood preservative, copper dimethyl-dithiocarbamate (CDDC) is reviewed in this paper. CDDC is formed in situ by dual pressure treatments. Laboratory and field efficacy trials, physical and chemical properties of the preservative solutions and treated wood, and plant handling characteristics of the system are examined.
D K Stokes, M H Freeman, T L Woods, R D Arsenault
Effect of protective additives on leachability and efficacy of borate treated wood
2002 - IRG/WP 02-30290
Borate preservatives have been used extensively in many countries as an effective means for protecting wood against fungal and insect attack especially in interior environments. Under exterior conditions, borate compounds have a main disadvantage as they can be leached from treated wood as a result of their water solubility. In this study, we compared the potential of different additives for reducing the leachability of boron preservatives from treated wood. Scots pine sapwood (Pinus sylvestris) and poplar (Populus trichocarpa x deltoides) test samples were vacuum treated with 1 % BAE (Boric Acid Equivalent) disodium octaborate tetrahydrate (DOT) solutions containing various additives e.g. glycerol/glyoxal, polyvinylpyrrolidone (PVPY), a commercial resin compound and a commercial water repellent. The European Standard EN 84 was used as a leaching test for both coated and uncoated specimens. The results of chemical analysis of leachates taken at different periods showed that the use of protective additives reduces the boron leachability. The glycerol/glyoxal additive applied to treated pine sapwood showed the best performance. The percent of boron retained in uncoated pine sapwood was 26% while coated samples still retained 45% after 14 days of intense leaching. Similar tests on poplar revealed 19% and 34% for uncoated and coated samples, respectively.This represents a gain of 20 to 25% compared to pure DOT treated specimens of both wood species. Preliminary biological tests were carried out on malt agar using a miniblock technique for uncoated pine sapwood and beech, with Poria placenta and Coriolus versicolor, respectively. After six weeks of exposure to fungal attack all boron protective systems tested proved their effectiveness, as none of the test samples exhibited a mass loss exceeding 4%. The reference 1% BAE without protective additives showed an average mass loss of 15%. Finally, test data are reported of standard EN 113 testing in view of a further evaluation of the biological efficacy of combined DOT-additive treatments.
A Mohareb, J Van Acker, M Stevens
Determination of the preventive efficacy against wood destroying basidiomycetes fungi, EN V 839 - CEN/TC 38 WG 9
1993 - IRG/WP 93-20015
The WG 9 of CEN TC/38 has presented to EC a mycological test to assess efficacy of preservatives applied by surface process. This method is now an experimental standard (EN V 839) which has to be approved by the different european delegations. The following paper is not the standard as it has been proposed but is a presentation of the principle of the method. The experimental standard specifies a laboratory method of test which gives a basis of the assessment of the preventive action of a wood preservative when applied as a surface treatment against Basidiomycetes fungi. This method is applicable to formulations of preservatives in a ready to use form (organic formulations, organic water-dispersible formulations, water-soluble materials). Series of susceptible wood species specimens are treated on longitudinal faces whith the preservative in test using brushing as surface procedure. Test specimens are then exposed by an intermediate mesh to feeder blocks infestedby pure culture of Basidiomycetes fungi in sterile conditions and penetration of fungi is assessed on cross section sawn in the samples at the end of the test.
Water-based wood preservatives for curative treatement of insect-infested spruce constructions
1998 - IRG/WP 98-30171
On laying down sanitation measures for wooden constructions infested by wood boring insects, we must take into account static risks for the construction - and, thus, for the security of the user - as well as risks for humans and environment due to the chemical preservative compounds of the treated wood. Analyses on many roof constructions made with spruce (Picea abies L.) have revealed that Hylotrupes bajulus L. and Anobium punctatum De Geer have not the significance given to them for decennies. That often allows to replace solvant-based with water-based wood preservatives in old buildings, for the protection of humans and environment. Therefore, a method has been developed in Switzerland for testing wood preservatives with delayed curative efficacy against the house longhorn beetle. Like the European Anobium Standard EN 370 this method intends to prevent the emergence of Hylotrupes beetles. Laboratory tests with diverse water-based wood preservatives available on the market in Switzerland have shown that particularly boron and benzoylphenylurea derivatives containing products get a sufficient penetration in the wood and prevent the emergence of the beetles.
E Graf, P Manser, B Lanz
The effect of treatment method on CCA efficacy in Corsican pine
1992 - IRG/WP 92-3723
As part of a study into the influence of application method on preservative efficacy Corsican pine (Pinus nigra) samples (50 x 50 x 400 mm³) were treated with a CCA formulation using Bethel, Steam/Bethel or Lowry processes. Full penetration of the preservative at a gross level was confirmed using a copper disclosing reagent. The preservative was allowed to fix and then samples were converted into mini-blocks (30 x 10 x 5 mm³) to produce decay test samples from various locations within the larger samples. After leaching, sets of replicate mini-blocks were exposed to the decay fungi Coniophora puteana FPRL 11E, Coriolus versicolor FPRL 28A, and Chaetomium globosum FPRL S70K. Equivalent sets of leached blocks, were analysed using atomic absorption spectrophotometry to determine preservative concentration and balance. The results of this study have been used to assess the effect of preservative application method on CCA efficacy. They also indicate how treatment method affects the distribution of the active elements of the preservative throughout the treated wood.
P R Newman, R J Murphy
Efficacy of anhydrides as wood protection chemicals - II. Performance against soft rot fungi
1998 - IRG/WP 98-30174
Pine sapwood modified with various anhydrides and with butyl isocyanate was tested for its resistance to soft rot decay. Small stakes were exposed for 20 months in unsterile soil in a fungal cellar test. Wood modified with butyl isocyanate performed better than any of the anhydrides tested, with a threshold level of protection (less than 3% weight loss) at 12% weight percent gain (WPG). Stakes acetylated to 15% WPG did not give complete protection against soft rot. Stakes modified with alkenyl succinic anhydride showed increasing resistance to soft rot with WPG up to about 10% WPG, above which no further improvements were evident. Succinic anhydride and phthalic anhydride treated stakes showed little or no noticeable protection.
S C Forster, M D C Hale, G R Williams
Testing of termiticides in soil by a new laboratory method with regard to Phoxim for replacement of chlorinated hydrocarbons
1986 - IRG/WP 1292
In comparison to chlorinated hydrocarbons insecticides of the compound classes organophosphates, carbamates and pyrethroids were tested according to an earlier described soil-test in the laboratory. The following termite-species were used: Heterotermes indicola, Reticulitermes santonensis and in addition Reticulitermes flavipes, Reticulitermes lucifugus, Reticulitermes speratus and Coptotermes formosanus (Rhinotermitidae). The method gives reliable results. Criteria for evaluation are mortality and penetration of the termites into the treated soil. According to this test organophosphates, specially phoxim, have a good potential to replace chlorinated hydrocarbons.
Efficacy of some extractives from Pinus heartwood for protection of Pinus radiata sapwood against biodeterioration. Part 1: Fungal decay
1995 - IRG/WP 95-30072
Chemical compounds thought to contribute to the natural durability of heartwood of Pinus spp. were either chemically synthesised in the laboratory or extracted from the heartwood of Pinus elliottii or Pinus caribaea. These compounds included the stilbenes, pinosylvin and its mono- and di-methyl ethers, and the flavonoids, pinobanksin and pinocembrin. Small blocks of Pinus radiata sapwood were impregnated with methanolic solutions of pure compounds or heartwood extracts, to a range of retentions extending above and below the concentration of each compound known to occur in the heartwood of Pinus spp.. Fungicidal efficacy of these compounds has been evaluated by exposure of treated blocks to pure cultures of a white and a brown rot, in addition to an unsterile soil test.
M J Kennedy, J A Drysdale, J Brown
A note on testing the efficacy of wood preservatives above ground
1995 - IRG/WP 95-20078
A number of test methods have been used to evaluate the performance of wood preservatives in above ground situations. These have included EN 113 tests following natural exposure weathering (NEWT), L-joint or T-joint tests, lap-joint tests, and decking tests. A new test referred to as the A-frame test has been developed and is under evaluation. This is based on a sandwich-type test in which a thin (3.5 mm) sample is exposed outdoors between two untreated samples on a rack or A-frame. The advantages and disadvantages of these types of tests are discussed in a short note.
G R Williams, J A Drysdale, R F Fox
Effects of timber surface properties and dipping conditions on uptake of antisapstain actives from two aqueous suspensions, and ultimate effects on efficacy against mould and staining organisms
1995 - IRG/WP 95-30073
Green-off-saw rough sawn Pinus elliottii (slash pine) boards were dipped in aqueous suspensions of two antisapstain formulations, and the resultant surface retentions of active ingredients MTC (methylene bisthiocyanate), CTL (chlorothalonil) or TCMTB (2(thiocyanomethylthio)benzothiazole) were monitored by chemical analysis. Surface retentions increased with suspension concentration and surface roughness, and decreased with initial timber moisture content. Dipping time beyond 20 seconds, timber basic density and earlywood content had little effect. Relatively low surface retentions, produced by dipping smoother boards with higher initial moisture contents, provided lower protection against mould and stain during seasoning than higher retentions. Equations describing the effect of surface retention on efficacy were developed for both formulations, and retentions providing complete protection under the conditions of the test were determined.
M J Kennedy, T L Woods
Biocides - Efficacy assessment and doses for wood preservatives (product type 8). Local/geographical aspects. Termite control as case study
1999 - IRG/WP 99-20181
Currently, the efficacy of a wood preservative, as biocidal product type 8, is assessed as a ‚critical value' (CV), an efficient dose (retention in wood at a given depth of penetration). CVs are planned to be adapted for exposure to basic target organisms (5 hazard classes) and additional requirements concerning the occurrence of local target organisms in relation with climate, building design and relevant economical impact. Among them, the termite case study is illustrative. The vote of a french law, on 26 may 1999, aiming to protect consumers and to organize termite control puts termites, a "local target at the euro scale and a universal one in some euro territories", in the spotlights of actuality and helps to point out some of the remaining questions raised by the implementation of Dir 98/8 on Biocides. Based on CEN/TC/38 simulated use tests, which doses have to be used for conditions of exposure and climate, ranging from polar to tropical? Practical proposals are made to take into accound local prescription based on actual target organisms, and move on to standard biocide profiles.
Evaluation of the leach resistance and preservative efficacy of novel biocides as surface treatments applied by brush to spruce (Picea abies)
1998 - IRG/WP 98-30170
The comparative leach resistance and preservative efficacy of a number of alternative organic preservatives (available from Zeneca Specialties) and selected commercially available biocides as surface coatings to wood in Hazard Class 3 have been assessed. Two concentrations of test preservatives were applied by brush to Spruce (Picea abies), including formulation and untreated controls. A leaching program was carried out involving the immersion of the treated blocks in water for a scheduled period of time. Blocks were then subjected to biological tests to determine preservative efficacy using the basidiomycetes Coniophora puteana and Gloeophyllum trabeum in a modified EN 113 system; sapstain and mould tests were separately undertaken according to a modified EN 152 test using mixtures of Aureobasidium pullulans and Sclerophoma pithyophila, and Trichoderma harzianum and Trichoderma saturnisporium. Of the four alternative actives tested, one Zeneca development product based on Hexaconazole compared very favourably against the selected commercial biocides tested. An aqueous system based on a Zeneca penetrating aqueous polymer coupled with the Zeneca development active demonstrated favourable performance in relation to an existing solvent based product.
I M Tierney, A Bruce, D C R Sinclair, T Yeates
Effect of borate on uptake and efficacy of an anti-sapstain treatment
2005 - IRG/WP 05-30380
The potential for using borates to enhance uptake and efficacy of propiconazole-based anti-sapstain chemicals was assessed on ponderosa pine sapwood wafers. Borates had no consistent effect on either net solution absorption or propiconazole distribution in the wood. Even small amounts of borate, however, markedly improved the performance of propiconazole against fungal discoloration. These results are consistent with previous tests of borate addition to other fungicides and highlight the potential for using less expensive ingredients to boost the performance of more costly biocides.
Jianju Luo, Hua Chen, J J Morrell
A collaborative test to determine the efficacy of poyurethane coatings on wood samples exposed in the marine environment. 1st Interim Report
1988 - IRG/WP 4145
Wood samples coated with elastomeric polyurethane (ca. 50 mils thick) were exposed for up to 2 years in 12 tropical and temperate marine test sites with known teredinid, pholad and/or crustacean infestations. All uncoated control samples were destroyed or partially destroyed. Polyurethane-coated samples were not attacked, the surfaces of the coating were sound and the polyurethane adhered well to the wood samples.
R A Eaton
Methods for testing fumigant efficacies against termites
1986 - IRG/WP 1297
Methodologies for testing fumigants against termites are reviewed and factors needed to be taken under consideration for standardization listed. Toxicity should be defined by both direct exposure to the gas and under more practical "barrier" conditions which include test enclosures simulating abiotic surroundings of the termites, i.e. wood, nest material, etc. To observe latent effects, mortality should be recorded periodically after exposure until rates decrease to control levels. Fumigant efficacy should be reported as a function of concentration and exposure time, termed lethal accumulated dose (LAD).
N-Y Su, R H Scheffrahn
The efficacy of polyurethane coatings on wood samples exposed in the marine environment. Final Report -10 Year Assessment
1996 - IRG/WP 96-10170
The results of an IRG collaborative marine trial to investigate the long-term permanence and efficacy of polyurethane coatings against marine borers are reported. PU-coated wood samples were exposed at a range of sites from tropical to cold temperate locations. The marine borer species present at the sites included teredinids, pholads, limnoriids and sphaeromatids so that each site offered its own peculiar degree of hazard. At most sites the integrity of the PU-coating was sound and wood samples were undamaged by marine borers after periods of exposure extending up to ca. 10 years. Where damage to the wood was recorded, mechanical abrasion of the coating had exposed the wood to attack by teredinids and pholads at one site and at a second site, sphaeromatids had perforated the coating. The significance of the results is discussed in terms of the protection afforded to submerged maritime timber structures coated with elastomeric polyurethane.
R A Eaton
Leaching of CCA components from treated wood under acidic conditions
1993 - IRG/WP 93-50004
The leaching of CCA components from treated wood under acidic conditions were investigated. Western hemlock treated with three types of CCA and two levels of target retention was subjected to leaching at four different levels of pH. After leaching tests, leached samples were subjected to laboratory decay and soft rot tests. The amount of CCA components leached was dependent on acidity of leaching solution, CCA formulation, and target retention. The leaching of CCA components at pH 4.0 or above was not significant even though a relatively low amounts of arsenic were leached. The resistance of leaching according to the type of CCA was in the sequence of CCA-Type C (oxide), CCA-Type C (salt) and CCA-Type B (oxide). The amount of leaching was increased with the increase in target retention. The reduction of biological effectiveness was not distinct for treated wood leached in acidified water of pH 4.0 or above. Based on the results of this study, it might be concluded that losses of CCA components at pH 4.0 or above were not great enough to cause public concern about environmental problems and reduction of biological efficacy in service.
Jae-Jin Kim, Gyu-Hyeok Kim
Development of an Australasian protocol for assessment of wood preservatives
1994 - IRG/WP 94-20043
The Australasian Wood Preservation Committee (AWPC) is currently developing a suite of assessment procedures (protocols) for the biocidal efficacy of wood preservatives for approval in Australasia (Australia, New Zealand, Papua New Guinea, Fiji). Protocols are being prepared for the six hazard levels recognised in the relevant standards of member countries and represent the minimum procedures required to provide biocidal efficacy data which may be needed to obtain preservative approval and registration by the appropriate regulatory authorities. The protocols cover a combination of laboratory and/or field testing. This document presents a brief outline of the proposed format of the protocols.
W D Gardner, H Greaves, M E Hedley, K J McCarthy, J Norton
Laboratory bioassay on the termiticidal efficacy of two ACQ formulations
1999 - IRG/WP 99-30199
The termiticidal efficacy of two ammoniacal copper quaternary ammonium formulations (ACQ) was evaluated in a laboratory bioassay using two species of subterranean termites, Mastotermes darwiniensis Froggatt and Coptotermes acinaciformis (Froggatt). Five retentions (1.0, 2.0, 4.0, 6.0 and 8.0 kg/m3 of active ingredient) of each ACQ formulation (MitrexACQ and ACQ97) were assessed in sapwood specimens of the softwood Pinus radiata D. Don and compared with the same retentions of the conventional benchmark preservative CCA (Tanalith C). All specimens (including controls) were subjected to an artificial weathering schedule prior to the bioassay. Under the conditions of the laboratory bioassay, both MitrexACQ and ACQ97 showed considerable potential as water-borne preservatives for preventing significant attack of P. radiata sapwood from two of Australia's most economically significant species of termite. At each of the retentions tested, MitrexACQ and ACQ97 performed comparably or better than equivalent retentions of CCA.
J W Creffield, A F Preston, N Chew