IRG Documents Database and Compendium


Search and Download IRG Documents:



Between and , sort by


Displaying your search results

Your search resulted in 206 documents. Displaying 25 entries per page.


TBTO absorption and penetration in pine joinery treated by various processes
1989 - IRG/WP 3523
Matched sections of several White pine (Pinus strobus) and Ponderosa pine (Pinus ponderosa) mouldings were treated with TBTO by Double vacuum, modified empty-cell, 15 second dip and several preheating treatments followed by a 15 s dip treatments. As expected the double vacuum and empty-cell (batch) treatments resulted in much greater retentions and penetrations than the dip treatments. The absorptions by the 15 s dip treatments could be improved significantly by preheating the wood to 60-90C° by microwave, radio-frequency or infra-red techniques. Since this approach is amenable to a continuous treatment process, it is being evaluated for potential commercial application.
P A Cooper, Y T Ung


The multi-phase pressure (MPP) process. One stage CCA treatment and accelerated fixation process - Concepts proved by repetitive pilot plant treatments
1997 - IRG/WP 97-40079
Twenty-four charges of radiate pine roundwood or sawn timber were treated using the MPP Process and hot CCA solution. Treated timber met the CCA retention and penetration requirements of the NZ Timber Preservation Council for Hazard Classes H3 to H5. The objectives of the trials were: (1) To "stress" CCA solution by repetitive heating, treating and cooling to determine its stability in the process; (2) to determine any effects of pre-drying regimes on the standard of treatment; (3) to determine the extent of fixation influenced by various treatment variables. At the finish of the trials, the working solution was clear with no propensity to sludging. Preservative element ratios remained constant throughout the trials. Wood moisture content at the time of treatment had, not unexpectedly, most effect on degree of fixation achieved. Kickback liquid contamination with residual CCA and organic carbon was greater when wood moisture contents were high.
A J Pendlebury, J A Drysdale, K Nasheri, H Pearson, M E Hedley


Effect of treating process on efficacy of CCA in a laboratory decay test
1990 - IRG/WP 3628
Test samples of Pinus radiata sapwood measuring 40x40x500 mm³ were treated with a range of concentrations of the copper-chrome-arsenate (CCA) formulation "Tanalith C" using Rueping (empty cell), Lowry (empty cell) and Bethell (full cell) treatment processes. Samples were then reduced to 40x40x7 mm³ test blocks and exposed to the decay fungus Coniophora puteana using an agar/block technique. Replicate blocks were analysed for preservative components. Regression analyses of percentage weight losses of test blocks against total Cu+Cr+As retentions (TAE) showed differences in efficacy of the preservative when applied by the three different processes, the order of effectiveness being Bethell > Lowry > Rueping. Two hypotheses are proposed to explain the results: (1) Disproportionation within the wood of preservative salts when applied by empty cell processes, (2) Differences in distribution of preservative elements following treatment by the three processes.
M E Hedley, K Nasheri, J G Van der Waals


Preservative treatment of rubber wood (Hevea brasiliensis) to increase its service life
2005 - IRG/WP 05-40320
Rubber wood (Hevea brasiliensis) possess excellent properties for interior designing, wood working and furniture making. But it is very much susceptible to sap stain and mould fungi which decreases the service life. For profitable uses , it is necessary to increase the service life of rubber wood. To protect the rubber wood from wood degrading agents, the sawn timber were treated with Borax – boric acid solution and Copper-chrome -boron solution by soaking process and Lowry empty cell pressure process following moderate treatment schedule. It was found that rubber wood can be treated satisfactorily by both the processes with acceptable penetration and retention.
K Akhter


Multiple-Phase Pressure (MPP) Process: One-stage CCA treatment and accelerated fixation process. 3. Effect of process variables on sapwood treatment and CCA fixation.
1998 - IRG/WP 98-40114
The Multiple-Phase Pressure (MPP) Process achieves treatment and fixation as combined process using hot CCA, within a 2-3 hour time-frame. Timber is treated to saturation with hot CCA using an empty cell process. During the pneumatic pressure phase, hot solution is held in the wood in an otherwise liquid-free treatment vessel until fixation is >95% complete. This report details a factorial design series of treatments undertaken to determine the effect of key process variables, particularly CCA solution temperature and time held at pneumatic pressure, on the degree of fixation achieved during treatment and the resultant Cu, Cr, As and Total Carbon concentration in kickback solutions. Increasing the CCA solution temperature resulted in greater fixation. At a solution temperature of 75°C, extending the time at pneumatic pressure beyond 60 minutes did not result in any significant increase in preservative fixation.
H Pearson, K Nasheri, J A Drysdale, G Durbin, M E Hedley


Effects of nano-wollastonite impregnation on fire resistance and dimensional stability of Poplar wood
2012 - IRG/WP 12-40595
The fire-retardant properties of Nano-Wollastonite (NW) in poplar wood (Populus nigra) were determined in this study. Some physical properties such as water absorption, volumetric swelling and Anti-Swelling Efficiency (ASE) were also measured. Specimens were prepared according to the ISO 11925 standard for the fire-retarding properties, and ASTM D4446-2002 standard for the physical properties. Impregnation of wood specimens with nano-wollastonite was carried out using the Ruping Method (empty-cell process) with a concentration of 10%. Three fire-retarding properties were measured; weight loss, ignition point and fire endurance. The results showed that fire-retarding properties increased in the NW-treated specimens. In addition, the NW-impregnated specimens gained higher dimensional stability. However, the water absorption also increased.
A Karimi, A Haghighi Poshtir, H Reza Taghiyari, Y Hamzeh, A Akbar Enayati


Comparison of cubic and plug samples for preparation and data assembly in permeability study
2000 - IRG/WP 00-20197
In order to determine if plug experimental samples (PES: 30 x 15 mm2 diameter) could be used for inspection of wood permeability characteristics, radial and longitudinal flow directions were prepared according to either PES or cubic experimental samples (CES: 100 x 20 x 20 mm3) from the sapwood zone of Sitka spruce and treated by tanalith-C according to full-cell process. Results from the two preparation techniques agreed in the test to determine the mean percentage of void volume filled by liquid both radially and longitudinally, while the preparation process (i.e. machining, sealing, etc.) of the experimental samples and the period of the data collection was quite longer in CES than that for PES in either flow direction.
I Usta


An effective preservative treatment of borak bamboo (Bambusa balcoona Roxb.)
1996 - IRG/WP 96-40070
Adequate penetration and retention of CCA and CCB has been obtained in predried Borak Bamboo (Bambusa balcooa Roxb.), aboundantly grown in Bangladesh, with Full Cell Pressure Process. The treated bamboo can be used as building materials, the sufficient treatability ensured its long term best utilization at ground contact and indoors. Which will keep the environmental & socio economical conditions of Bangladesh more viable and normal.
A K Lahiry, S Begum, G N M Ilias, M A Matin Sheikh, M A B Fakir, M I Hossain


Analysing the characteristic role of moisture content for drying and fluid flow in Sitka spruce. - Part 1: The drying process of sapwood and heartwood of two different thickness of Sitka spruce using a kiln. - Part 2: Effects of moisture content on longitudinal permeability of Sitka spruce in vertical variation of the tree
2000 - IRG/WP 00-40173
The characteristic role of the moisture content in Sitka spruce (Picea sitchensis (Bong.) Carr.) that grown in the United Kingdom was examined by this study on the basis of (1) the reduction of moisture content in two different thickness of sapwood and heartwood by kiln drying process, and (2) the effects of moisture content to the longitudinal void volume filled of tanalith-C by the full-cell process from base (1 m) to apex (3 m) of the tree in sapwood zone. Accordingly, conclusions on indication of the drying process of sapwood and heartwood, and vertical variation of longitudinal flow with effects of moisture were listed separately: (1) Comparison of Drying Characteristic of Sapwood and Heartwood: The two different thickness (300x30x30 mm3 and 300x20x20 mm3) of sapwood and heartwood of Sitka spruce was dried using the suggested drying schedule in kiln. The reduction of moisture was schematically diagrammed according to sapwood and heartwood stakes. The reduction of moisture followed the same downward trend that sapwood (S) loses more moisture than heartwood (H) although the small stakes of S and H lost moisture rapidly compared with the large ones. (2) Vertical Variation of Moisture Content and Longitudinal Permeability: The 90 kiln dried defect free sapwood stakes (150x25x25 mm3) of Sitka spruce was taken from base to apex of the trees at 1, 2 and 3 m above ground level. After having the determination of moisture content in each experimental stake, the treatment was carried out by the full-cell process with CCA preservative (Tanalith-C) using a model pressure treatment plant. Significant differences observed among the tree heights from 1 to 3 m showing that slightly increases of moisture content from base to apex and conversely decreases of longitudinal void volume filled by preservative fluid.
I Usta


The effects of density on vertical variation of permeability of Sitka spruce within tree
2000 - IRG/WP 00-40156
Tree improvement of Sitka spruce is a combination of silviculture and tree breeding aimed at producing higher quality products including increased growth rate and timber yield, and wood density. It is useful to know annual ring structure and density distribution when studying the quality of wood, grading it, or determining how the wood structure affects residual flow in softwoods. Since density is a factor under genetic control, the study in this article details the effects of density on longitudinal and radial permeability of Sitka spruce from base to apex. Comparison of overall means of both longitudinal and radial void volume filled (%) suggest that longitudinal permeabilities were almost the mirror image of those for the radial permeability along the tree trunk.
I Usta.


A behaviour of CCA penetration of fir (Abies bornmulleriana Mattf.) at different ramp times and constant vacuum/pressure applications
2006 - IRG/WP 06-40346
A behaviour of CCA penetration of Bornmulleriana fir (Abies bornmulleriana Mattf.) at different ramp times and constant vacuum/pressure applications was illustrated for the main flow directions by the experimental pictures.
I Usta, R Despot, M Hasan


Leaching of copper, chromium and arsenic from CCA-treated slash pine heartwood
1994 - IRG/WP 94-50020
Drying green slash pine with any of three high temperature drying schedules produced a product in which both the sapwood and the heartwood could be penetrated with CCA using a modified Bethell treatment schedule. Required H3 retentions were achieved in both sapwood and heartwood, from 200 litres per m³ charge uptake. Post-treatment fixation/drying was accomplished by three different regimes, including an accelerated fixation. Although acceptable preservative penetration and retention was achieved in the heartwood, arsenic fixation (as determined by both AWPA procedure E11-87 and U.S. EPA TCLP procedure) was inferior to that attained in the sapwood. TCLP leachates from 1 cm³ heartwood blocks contained up to 4.5 mg/l arsenic, very close to the maximum value (5.0 mg/l) currently permitted in Australia for arsenic waste disposal. Though there are clear advantages in achieving heartwood penetration, caution must be exercised to ensure that this step does not compromise the accepability of the product. No process modification could be accepted if it introduced possibilities of exceeding safe disposal limits for sawdust and offcuts, or building site contamination.
M J Kennedy, G Palmer


Preservation of two Indonesian timber species for marine environment purposes
1994 - IRG/WP 94-10079
This paper deal with the experiment of CCA full cell processed two non-durable Indonesian species for placed in the marine environment. 80 samples of 5 x 5 x 60 cm³ dried durian (Durio zibethinus) and mahogany (Swietenia mahagony) timber were CCA-full cell processed using 4 combination treatment of: without steaming; one hour steaming; 3% and 5% CCA solution concentration. 40 samples of them were field tested in the sea water in Rambut island beach near by Jakarta. The results shows that mahogany very difficult to treat and not recommended to be placed in marine environment, while CCA retention in durian timber could reach 29.91 kg/m³ and meet the requirement of retention for timber to be placed in marine environment. After two month field test in sea water full cell processed drian with 5% CCA solutin concentration could prevent marine borers attack.
P Permadi, I M Padlinurjaji, F Rasmita


Wood protection processes in the Asean countries
1994 - IRG/WP 94-40034
This paper presents the wood processing practices in the Asean countries composing Indonesia, Malaysia, Philippines, Singapore, and Thailand except Brunei. The development of wood preservation industry in these countries started as early as 1922 to 1960. As in other industrial countries, treatment pressure with creosote of utility poles, railway sleepers, and marine pilings are the prime commodities that require long term protection. The introduction of water-borne preservatives covered the treatment of sawn timber and other lignocellulosic materials. It covers the historical background and development of the industry in each country, treatment processes both pressure and non-pressure of commodities e.g. power poles, railway sleepers, marine pilings, housing components, furniture, and other lignocellulosic materials requiring protection against biological deterioration. Technical problems are common and varied due to different treatment standard specifications and preservatives specially water-borne types. The pollution aspect of preservating plants and the prohibition and control of some wood preservatives is a growing concern of the environmentalists. Wood preservation in the Asean countries will stay on and geared towards the treatment of industrial tree plantations, rubberwood, palms and bamboos.
F R Siriban


A study on the pressure impregnation of Eucalyptus globulus fence posts with CCA preservatives. Part 1
1988 - IRG/WP 3470
This paper describes the impregnation with CCA preservatives by full-cell process of Eucalyptus globulus fence-posts. Several treatments were made for different times of initial vacuum and treating pressure, with fence-posts from two coppice plantations (1st and 2nd rotations), assembled into three diameter classes: small, medium, large. The results concerning the absorption and lateral penetration of the product reveal that impregnation of Eucalyptus globulus though difficult is often possible. The highest average values were recorded in the small diameters, yet the standard deviation in all three classes is quite remarkable. Moreover fence-posts from the 1st rotation stand show a better behaviour with the treatment. There seems to be no significant correlation between absorption and initial vacuum or treating pressure times.
D De Sousa Castro Reimão, L Nunes


Investigation of temperature effect on fixation of Celcure preservative (ACC) in beech (Fagus orientalis)
2001 - IRG/WP 01-40200
In this research, the fixation speed of Celcure 2% (ACC) preservative salt, under temperature of 17°C, 27°C and 50°C, on intact and stained wood specimens of beech was investigated. For this purpose, blocks of wood with 5x5x7 cm dimensions were prepared and saturated with 2% ACC concentration by full-cell process. The specimens were put in three incubators at the above-mentioned temperatures. For measuring the percentage of fixation through time, the specimens were extracted by using hydraulic pressure equipment, under 69 Mpa pressure. The pH of extraction was measured with the method of diphenyl Carbazid and by using spectrophotometer. This measurement was done continuously and the amount of 6- valence chromium concentration present in the extract was compared with the amount of chromium concentration in the primary solution and then the percentage of fixation was calculated. The results showed that the decrease in 6-valence chromium is accompanied with increase of pH, this is due to absorption of positive hydrogen ion by 6-valence chromium for reduction to 3-valence chromium and also ion-exchange of active components with wood during the primary phase of fixation. Also, the time necessary for reaching complete fixation in intact and stained wood in the fixation temperature conditions of 17, 27 and 50°C were 1075, 501, 109 hours, respectively. In general, the results showed that temperature has effective role in accelerating of fixation process and in this respect, intact and stained wood did not show significant statistical difference.
A Karimi, M Ghorbani


A study on the pressure impregnation of Eucalyptus globulus fence-posts with CCA preservatives. Part 2
1989 - IRG/WP 3514
This paper describes the second part of a study on pressure impregnation of Eucalyptus globulus fence-posts with CCA preservatives presented at the IRG 19th Meeting. Fence-posts of three diameter classes, were treated, considering only one treatment schedule. The results show possibility of vacuum-pressure impregnation of blue gum fence-posts, with diameter less than 9 cm, though mainly by longitudinal penetration, which is usually conditioned by the length of the fence-post.
L Nunes, D De Sousa Castro Reimão


Trial to determine a suitable schedule for radial and longitudinal treatment of plug samples by comparison of changes in the fluid retention and the treated area
2001 - IRG/WP 01-40211
A full-cell process was carried out using different treatment schedules for radial and longitudinal samples because of the anisotrophy of flow. When timbers are impregnated with preservatives much better penetrations are obtained via the end grain than laterally (across the grain). Therefore, suitable schedules for radial and longitudinal flow directions were determined in an trial experiment using locally grown Sitka spruce, Queen Charlotte Islands (QCI) provenance, from Beddgelert Forest in North Wales. The full cell experimental schedules used were: initial vacuum 15 minutes at -0.84 bar and various pressure periods that was 5 bar pressure in radial flow direction for 15, 45, and 60 minutes, 3 bar pressure in longitudinal flow direction for 3, 6, and 9 minutes. No final vacuum was applied. After the treatment, the fluid uptake was calculated, and the fluid retention was determined on a whole-block basis. After fixation, plugs were dried and cut longitudinally through the centre and copper penetration was determined by spraying a 1% solution of Chrome Azurol-S on the cut surface and observing the blue colour indicative of copper. The preservative penetration was then measured by image analyser as depth (mm) and as total treated area (%). From the experimental data, it was concluded that the suitable schedules are 5 bar pressure for 45 minutes for the radial flow direction, and 3 bar pressure for 7 minutes for the longitudinal flow direction. Therefore these schedules are suggested to be used to examine the permeability of the different seed origins in both radial and longitudinal flow directions.
I Usta


A note on te seasoning, preservative treatment and suitability of debdaru (Polyalthia longifolia Benth & Hooker.) for poles
1995 - IRG/WP 95-40056
The main work is to determining the suitability of Debdaru (Polyalthia longifolia Benth.) as poles from Government and Village forests are investigated. The poles of Debdaru are easily treatable with CCA preservative by full-cell pressure method, but difficult to dry (air & kiln). Proper quality control must be maintain from procurement to treatment, specially during physical selection & drying (air & kiln) otherwise it may be discard as pole. Debdaru poles have been found suitable for power and Telecomunication lines with very keen care.
G N M Ilias, M D Rokib-ul-Hafiz


Notes on a wood preservation industry in Medan, North Sumatera, Indonesia
1987 - IRG/WP 3405
This paper deals with a descriptive account on the development of a wood preservation industry in Medan, North Sumatera (Indonesia). The industry was established in 1974 when the State Owned Electicity Corporation decided to use wooden power poles for their distribution network in North Sumatera province. However, the use of wooden power poles was discontinued in 1981, so as the preservation industry was severely affected. Some notes on the results of the full cell process, particularly on the percentage of over- and under-charged treatment, is also described in this paper.
N Supriana, A Murad


The effect of rate of pressure application on preservative uptake along and across the grain of fir (Abies bornmulleriana Mattf.) at different ramp and constant pressure times
2004 - IRG/WP 04-20292
This study was particularly design to determine the preservative uptake at different ramp (rate of increase in pressure) and constant pressure times on longitudinal, tangential and radial penetrations of fir (Abies bornmulleriana Mattf.) which grown indigeneously in Turkey. The samples of 2 cm cubes of kiln-dried wood (nominated to 12% moisture content) were treated at different ramp times varied from very fast to very slow rates of pressure (bar) per time (seconds) at 5, 15, 30, 60, and 90 sec. and the maximum pressure of 4 bars -in the treating vessel to refusal- was applied at the constant pressure time for 5 min. The preservative uptake was determined as the percentage of void volume filled (VVF%) for either flow directions at each ramp time. The results showed that the VVF% was, as expected, markedly greater in the longitudinal flow direction than both in the tangential and radial flow directions. In comparison to the VVF% laterally, it was greater in tangential direction than in radial direction in either treatment schedules. In this issue, although the trend seemed to be the similar between the flow directions, quite different patterns were observed within each direction for penetration and ramp times. Accordingly, conclusions were listed separately for each flow direction.
I Usta


Estimation of the impregnation degree of pine wood by the distribution analysis of active ions concentration in the cross-section
1999 - IRG/WP 99-20174
Samples in the form of pine wood rollers of diversified moisture content of ca. 50, 28 and 12% were impregnated with a water solution of the mixture type CCB with the use of the full-cell process. Moisture content was determined in individual layers from the girth to the pith. In the same way the concentrations of copper and chromium ions with the use of the spectrophotometric method and recalculated to the total dry mass of the preservative. Simultaneously, there was performed biological test according to EN 113 for the investigated mixture and different concentrations: 0,1; 0,16; 0,25; 0,4; 0,63; 1,0; 1,6; 2,5. The obtained fungicidal value let to determine the depth of biological resistance of impregnated wood within the impregnated zone.
K Lutomski, B Mazela


Variation in biological performance of CCA caised by preservative application method
1996 - IRG/WP 96-40072
A series of laboratory studies to investigate the influence of treatment application method on CCA performance in Cosican pine has been completed. Biological decay tests, such as serial exposures, were used to induce decay in wood at preservative retentions of up to 10 kg/m³ CCA salts. Significant differences in performance of the preservative against either brown, white or soft rot decay fungi were found depending upon the preservative application method used. The full-cell process gave the greatest level of CCA performance against Coniophora puteana whereas the Lowry empty-cell process gave the best performance against Coriolus versicolor and soft rot fungi. Pre-treatment steaming caused a general reduction in preservative efficacy. Analysis of the treated wood using FT-IR spectroscopy and electron microscopy with EDS for preservative micro-distribution indicated modification of the wood cell wall by steaming and differential distribution of copper depending on preservative application method. A hypothesis is proposed to account for the observed differences in preservative performance with treatment method.
P R Newman, R J Murphy


Microdistribution of water-borne preservatives in blue gum treated by full-cell process
1990 - IRG/WP 3617
The present work deals with the study of the microdistribution of copper, chrome and arsenic elements in Eucalyptus globulus Labill. sapwood, treated with a CCA water-borne preservative by full-cell process, with the help of scanning electron microscopy together with energy dispersion X-ray analysis technique. The work shows that the retention of CCA elements is high in vessels and vasicentric parenchyma as well as in the wood rays, whereas it is quite low in fibres. There are also some differences between retention obtained in the two levels of depth of radial penetration considered, increasing or constant rate of variation with depth having been found. Conclusion reached point to the need of obtaining high enough salt retention in sapwood in order to avoid this irregularity of microdistribution of CCA preservatives in Eucalyptus globulus round wood and ensure adequate durability.
D De Sousa Castro Reimão, J M Palacios


Preliminary pole treatment trials with chlorothalonil in hydrocarbon solvent
1994 - IRG/WP 94-40027
A series of 460-mm long, end-sealed southern pine pole stubs were treated with chlorothalonil in hydrocarbon solvent. Over sixty sections were treated using various combinations of initial seasoning (kiln-drying, steam-conditioning), treating temperature (ambient, 200°F), initial air pressure, and final conditioning (steam flash + vacuum, expansion bath + vacuum, steam distillation + vacuum). Disks removed from the treated sections were analyzed for preservative gradient. Results are discussed in terms of treatability and the impact of treating variables on preservative retention, penetration, and gradient shape.
H M Barnes


Next Page