Your search resulted in 85 documents. Displaying 25 entries per page.
Effect of long-term immersion in fresh and salt water on mould growth on Scots pine (Pinus Sylvestris L.) wood
2020 - IRG/WP 20-10962
Wood exposed outdoors will eventually be degraded by fungi, depending on exposure and material characteristics. Numerous wooden constructions in the Røros municipality have existed since the 17th century, but wood used in recent repairs have decayed faster than expected. Before 1970 timber was mainly transported by log driving or rafting, and the logs were immersed in water for longer or shorter ...
M Sand Austigard, J Mattsson
Moisture and temperature conditions in an old, highly moisture-loaded timber building in the Røros municipality, Norway
2020 - IRG/WP 20-10966
A 150 years old log building near Røros, Norway, has been in active use as a cowshed since its erection. The animals are kept inside the cowshed all winter and this causes a situation of a high moisture load on the wooden floor, wooden walls and ceiling. Logging of temperature and humidity over one year shows that there are favourable levels of moisture in the wood and air for development of moul...
M Sand Austigard, J Mattsson
Aiming for eco-friendly log production and wooden construction!
2021 - IRG/WP 21-50365
In order to reduce greenhouse gas (GHG) emissions to zero by 2050 in the fields of forest and forest products, it is necessary to promote appropriate management and renewal of planted forests, and development of wooden building materials and the wooden construction of mid-to-high-rise buildings with lower GHG emissions. Unless we also try to reduce the environmental loads other than GHG for such d...
N Hattori
Premature adhesion failure of exterior wood coatings – The influence of substrate temperature at coating application and moisture accumulation during storage
2022 - IRG/WP 22-40937
The present study aimed at extending the knowledge about premature coating failures of industrially finished wood cladding. Two potential factors were studied: the influence of substrate temperature at coating application and moisture accumulation during storage on the adhesion of waterborne coating systems. In the first experiment, 4 batches of wood specimens were submitted to 4 different tempera...
U Hundhausen
Manipulation of the hierarchical wood structure for extended carbon storage in the built environment
2023 - IRG/WP 23-50381
The sustainable processing of trees into construction materials can act as carbon storage. Carbon storage in durable sustainable wooden construction material has cumulative effects and net gain in storage in the built environment that can be offset by net losses in forest carbon by cutting the tree. Carbon storage for an extended period plays an important role in the mitigation of CO2 emissions an...
T Singh, A Arpanaei, D Elustondo, Q Fu
Developing thermal-energy storage systems based on Kraft lignin-glyoxal and organic phase-change material modified wood
2024 - IRG/WP 24-30810
This study investigated the use of modified wood as a thermal-energy storage material through the integration of paraffin-based phase-change materials (PCMs). The objective was to evaluate the influence of Kraft lignin-glyoxal prepolymer on the properties of wood modified with PCMs. The implementation of the modified wood involved preparing PCM emulsions, synthesizing lignin-glyoxal prepolymer, an...
C-F Lin, O Karlsson, D Jones, D Sandberg
ProFume® pre-shipment treatments of round wood against infestations with bark-breeding beetles - technical improvements
2025 - IRG/WP 25-41017
Since 2018, climate change and temperature shifts associated with this, increased the occurrence of bark-beetle induced calamity wood. Consequently, the significant Ips typographus outbreak in German spruce forests prompted harvesting, thus temporarily increasing timber market supply. This situation made Germany a key player in Europe’s log exports to China. In order to prevent the further sprea...
S Kümmritz, G M Kroos
Biocomposites based on fungal mycelium and beech particles impregnated with BPCM (bio-phase change material) for thermal energy storage
2025 - IRG/WP 25-41034
The building sector is a major contributor to Europe's carbon emissions, and transition to a bio-based economy is essential for achieving long-term sustainability goals. The European Union has set ambitious targets for climate-neutral heating and cooling by 2050, which requires the widespread adoption of energy-efficient and environmentally friendly technologies. A key element in this transition i...
E Nigrone, F De Francesco, J Conti, M Jebrane, M Nazari, N Terziev, S Palanti
Recycling wood treated with copper-based preservatives to produce hard carbon materials for energy storage applications
2025 - IRG/WP 25-50401
In this study, we explored the possibility of recycling wood treated with copper-based preservatives to produce hard carbon materials for use in energy storage devices. We pyrolsed both untreated and copper-treated wood into hard carbon, conducted microstructural and physicochemical characterisation, prepared electrode materials, and evaluated their electrochemical performance in sodium-ion batter...
D Huo, J-P Bonnet, A Jamali
WoodStock: Empowering climate-smart, circular, and zero-waste use of underutilized wood from the forest and building stock in the construction sector to support the New European Bauhaus
2025 - IRG/WP 25-50405
There is a clear need for enhanced contribution of the forest-based sector to decarbonisation strategies for buildings, both in terms of operational emissions, embodied emissions, and carbon removals. WoodStock is a multifaceted project dedicated to advancing climate-smart wood construction practices in alignment with the New European Bauhaus (NEB) initiative. A primary focus is the quantification...
L De Ligne, J Van Acker, J Van den Bulcke