Your search resulted in 692 documents. Displaying 25 entries per page.
Potential co-valorization of pyrolysis tars from five wood species form Tunisia as wood preservatives bases: Chemical compositions, antifungal and anti-termite activities
2025 - IRG/WP 25-20739
The pyrolysis of five Tunisian wood species (Ceratonia siliqua, Eucalyptus camaldulensis, Eucalyptus maidenii, Pinus pinea, and Quercus canariensis) was carried out in a custom-designed carbonisation reactor developed at the INRGREF's Wood Technology Section (Tunis, Tunisia). This process aimed to produce both char and pyrolysis by-products, particularly pyrolysis oils. The experiments were conduc...
M T Elaieb, J Valette, E Kiény, L Pignolet, S Ghariani, K Candelier
Evaluation of 'Deep Penetration Treatment' for wood preservation
2025 - IRG/WP 25-20746
‘Deep Penetration Treatment’ (DPT) is a recently developed wood preservation technique in Japan designed to meet the preservation standards required for residential foundations. This method involves spraying a specially formulated solvent-borne wood preservative onto properly incised dried lumber. Despite being a non-pressure treatment, DPT achieves penetration levels comparable to conventiona...
M Ikeda, T Shigeyama, Y Sugai
NTR classified preservative-treated laminated wood
2025 - IRG/WP 25-20750
NTR is a trusted quality labelling system used for the classification and quality control of wood products that have been treated with preservatives or modified. These labels are issued by the Nordic Wood Preservation Council (NWPC) and in recent years, producers of glued laminated timber as well as building material suppliers have shown increasing interest in NTR classification for glued laminate...
J Jermer, F Westin, R Digaitis
The iTrussT project – Advancements in timber bridge design, preservation, and monitoring
2025 - IRG/WP 25-20751
The Norwegian research project iTrussT (2025–2028) aims to advance timber bridge design and unlock wood’s full potential as a sustainable solution for modern infrastructure. It addresses three critical challenges: First, fatigue testing of glued laminated timber lamellae will provide deeper insights into shear failure mechanisms, supporting the development of safer, more efficient structures a...
K-C Mahnert, U Hundhausen
Carbon quantum dots as a fungicide and its applications in wood
2025 - IRG/WP 25-20754
In this work, we synthesised nitrogen-doped carbon quantum dots (CQDs) via a microwave assisted method. CQDs with proper structure showed excellent anti-fungal effects against both brown (Postia placenta, Pp) and white rot decay fungi (Trametes versicolor, Tv) on wood. The underlying anti-fungal mechanisms of CQDs on wood were further elucidated. We found that positively charged nano-sized CQDs pr...
X Zhao, Z Zhang, M Zhou, J Cao
The non-energy utilization of low-quality wood from the invasive species Prunus serotina
2025 - IRG/WP 25-30814
Alien invasive species in Europe, such as Prunus serotina, can significantly impact ecosystem structure and function. This species provides low-quality timber, which is most often used for energy purposes in the form of biomass. In the era of policies focused on a circular economy, seeking methods to extend the life cycle of raw materials and wood products is necessary. For this purpose, the wood ...
W Perdoch, P Kołwzan
Moisture uptake in CLT during the construction phase: real construction conditions versus specimens exposed to environment
2025 - IRG/WP 25-41019
The rapid growth in the use of Cross-Laminated Timber (CLT) in construction highlights the need to address durability concerns, particularly in regions with less experience in Mass Timber Construction and favourable climatic conditions for the biological degradation of wood, such as Mediterranean countries. A lack of awareness and deficient construction management can negatively impact the public ...
D Lima, S Duarte, J M Branco, L Nunes (†)
Fungal decay in cable car pylons in Svalbard - overview of results
2025 - IRG/WP 25-41026
A total of 212 iconic wooden cable car pylons were constructed for mining operations in Svalbard, significantly contributing to Longyearbyen's historical identity as a mining town. Fieldwork in Svalbard involved collecting wood samples from 22 of these pylons, targeting wood exposed both aboveground and ground proximity. Whilst the timber used in the constructions was assumed to be untreated Norwa...
G Alfredsen, M Altgen, M S Austigard, J Mattsson, M Nunez, L Ross, S Aarseth Tunstad, A Treu, I A Yakovlev, N Bjerregaard Pedersen
Relationship between changes inside moisture content of wood measured using temperature and humidity sensors and swelling and shrinkage
2025 - IRG/WP 25-41030
With the spread of mid and high-rise timber buildings, the long-term use of timber buildings is getting required more than ever. It is considered that measurement of the local inside moisture content of a wooden member is one of the useful methods for periodic health assessment of timber buildings. The aim of this research is to establish an easy estimation method of the local inside moisture cont...
Y Sadakane, T Mori
Linking treatability with moisture dynamics
2025 - IRG/WP 25-41031
Wood preservation is inherently linked to the ability to penetrate treating liquids. The EN 147374 (2022) standard provides a methodology to assess treatability and allows to identify wood species in relation to treatability classes. Over the past decades, performance of wood species in applications in use class 3 has been linked both to the impact of moisture dynamics and the resistance against f...
J Van Acker, K De Vriendt, M Durimel, L De Ligne, J Van den Bulcke
Durability evaluation of outdoor-exposed CLT treated with various wood presevatives using CT scans
2025 - IRG/WP 25-41035
Methods for wood preservation treatment of large materials such as Cross Laminated Timber (CLT) are limited. It is unclear which wood preservation treatment methods can effectively protect CLT from rot risk. In this study, accelerated rot tests (fungus cellar test) of CLT treated with the solvent-borne wood preservative by non-pressure treatment, named ‘deep penetration treatment’, were conduc...
Y Sakurai, T Shigeyama, Y Sugai
Colorimetric performance of temperate wood species under tropical weathering
2025 - IRG/WP 25-41041
The appearance of wood, including its color and texture, is one of the most important features for its application as solid products, such as furniture, cladding, and terrace decking. Weathering can cause significant changes in the color of wooden products in outdoor applications, influencing their market acceptance and long-term performance. This study evaluated the colorimetric performance of fo...
K da Silva Pereira, S J da Costa Lima, M F C Santos, L Emmerich, C Brischke, D C Batista
Hyperspectral imaging in qualitative and quantitative assessment of biocide treated timber
2025 - IRG/WP 25-50407
A hyperspectral camera operating in the shortwave infrared light range between 1000 – 2500 nm was used to collect spectral profiles of timber treated with different biocides and varying concentrations of a copper-ethanolamine based wood preservative. The spectra were analysed using statistical methods like principal component analysis, linear discriminant analysis, and partial least squares to a...
J Levanič, E Keržič, B Lesar, M Humar
Timber reuse and circularity: Insight from Norway's SirkTre and CircWOOD initiatives
2025 - IRG/WP 25-50409
Timber is central to the EU’s decarbonisation strategy, particularly in the building sector, which faces challenges related to climate adaptation, resource constraints, and rising costs. The four-year SirkTRE project aims to improve circularity in the timber industry by developing standards, promoting reuse, and expanding market opportunities. A key focus of SirkTRE is to increase the longevity ...
K Nore, L Ross
Leveraging Geospatial Mapping for Timber Circularity in Australia
2025 - IRG/WP 25-50410
Timber, renowned for its low embodied carbon and renewable characteristics, is a prime candidate for integration into the circular economy. However, challenges arise in the reuse, repurposing, and recycling of chemically treated materials. The National Centre for Timber Durability and Design Life (NCTDDL) at the University of the Sunshine Coast (UniSC) is leading a collaborative initiative with Fo...
T Singh, P Mitchell, M Strandgard, M Harris
Contribution of naturally durable wood use to Circular Economy - Understanding the classification system of natural durability and its variation within wood species
2025 - IRG/WP 25-50411
Total wood demand is shown by FAO to increase 49 percent between 2020 and 2050, regardless of deteriorating conditions such as deforestation and degradation due to fire and biological damages. Demand for wood as a building material is also projected by UNEP to increase significantly to 300 Gt in 2040. To address this situation, extension of the service life and re-use of wood are expected to make ...
K Yamamoto, T Osawa, R Noda
Wood Protection in the Tropics: A Necessity in the Face of Climate Change and Rising Demand for Wood Products Consumption
2025 - IRG/WP 25-50413
With the rising demand for forest products due to population growth and continuous expansion of tropical countries’ economies. Therefore, the need for judicious use of forest products in the advent of climate change to meet the needs of the people cannot be downplayed but serve as a clarion call to conserve and improve the use of forest products for longer services. My talk will highlight the st...
M Nurudeen Iddrisu