Your search resulted in 785 documents. Displaying 25 entries per page.
Durability Analysis of Bio-based Phenol-Formaldehyde Resin-Treated Wood
2025 - IRG/WP 25-20753
The aim of this study is to explore the application of bio-based materials in outdoor construction. Enhancing the durability of wood products effectively extends their carbon storage lifespan, making it essential to investigate their long-term durability. The study used commercial resin (CPF) and laboratory-synthesised petro-based phenolic resin (LPF) as control groups. Japanese cedar specimens we...
T-H Lin, P-Y Kuo
Sustainable and environmentally friendly bio-based protection against fire
2025 - IRG/WP 25-20756
Flame-retardant agents are used to confer fire resistant properties with effects strongly dependent on their ability to form char during the thermal degradation. The char coats the polymeric materials and provides a good barrier against heat and oxygen diffusion, thus reducing the combustion rate of the polymeric materials. Halogenated agents that are used today are toxic and may cause severe heal...
M Tanase-Opedal, A Larsson, P O Flaete
Curing Behaviour of Bio-based Phenol Formaldehyde Resin and the Durability Performance of Treated Wood
2025 - IRG/WP 25-20758
The aim of the study is to investigate the curing behaviours of bio-based PF resins treated Japanese Cedar (Cryptomeria japonica). Compared to conventional wood preservatives such as metal-based ACQ, bio-based PF resin was more environmentally-friendly and can store more plant-based carbon inside treated wood. However, all these preservatives have the risk of being leached out. This study conducte...
Y-S Lee, P-Y Kuo
Enhanced Termite Resistance of Low Durability Fast Growing Teak Wood by Non-Biocide Treatments Based on Chemical and Thermal Modification
2025 - IRG/WP 25-30818
Short rotation teak as a fast-growing tree can be considered as a renewable material resource for the future green economy. However, short rotation teak wood is susceptible to biodeterioration, particularly to termite attack. The objective of this work was to investigate the effect of chemical and thermal treatment on resistance of sapwood, transition wood, and heartwood of short rotation teak aga...
R Martha, K Candelier, M-F Thévenon, B George, I S Rahayu, W Darmawan, P Gérardin
Influence of plasma treatment on the coatability of wood primer with a topcoat for exterior use
2025 - IRG/WP 25-30828
The coatability of oil, or of solvent-borne alkyd resin wood primers with waterborne acrylic finish is the subject of much debate, but not much information can be found in the scientific literature on this topic. The aim of our study was therefore to evaluate the adhesion strength of the waterborne acrylic coating on oiled wood or wood with a solvent-based alkyd primer and to test the recoatabilit...
M Petrič, L Albreht, N B Štrus, E Keržič, M Pavlič, J Žigon, S Dahle
ProFume® pre-shipment treatments of round wood against infestations with bark-breeding beetles - technical improvements
2025 - IRG/WP 25-41017
Since 2018, climate change and temperature shifts associated with this, increased the occurrence of bark-beetle induced calamity wood. Consequently, the significant Ips typographus outbreak in German spruce forests prompted harvesting, thus temporarily increasing timber market supply. This situation made Germany a key player in Europe’s log exports to China. In order to prevent the further sprea...
S Kümmritz, G M Kroos
Durability evaluation of outdoor-exposed CLT treated with various wood presevatives using CT scans
2025 - IRG/WP 25-41035
Methods for wood preservation treatment of large materials such as Cross Laminated Timber (CLT) are limited. It is unclear which wood preservation treatment methods can effectively protect CLT from rot risk. In this study, accelerated rot tests (fungus cellar test) of CLT treated with the solvent-borne wood preservative by non-pressure treatment, named ‘deep penetration treatment’, were conduc...
Y Sakurai, T Shigeyama, Y Sugai
Non-destructive methods for field assessment of wood biodeterioration in hardwood trailer decks exposed to tropical environments
2025 - IRG/WP 25-41039
Apitong (Dipterocarpus spp.), an increasingly rare tropical hardwood from the rainforest in Southeast Asia, has long been used as decking materials for open-bed trailers and trucks across North America. As the natural population of Apitong trees steadily declines, there is an urgent need to find sustainable, domestically sourced alternatives for trailer decking. A recent project evaluated the perf...
X Wang, X Xie, G Kirker, C A Senalik
Towards Sustainable Wood Protection: PF resins-impregnated Paper Honeycombs and the role of Processing Parameters analysis by Response Surface Methodology
2025 - IRG/WP 25-41045
Honeycomb paperboard is an important wood-derived product and also an emerging new material to combine with wood panels. It is commonly applied as cushioning materials with excellent mechanical performance, and high demands in packaging market. The aims of this study were to enhance the durability of honeycomb paperboard using PF resins of various molecular weights (Mw 200, Mw 500, Mw 700), partic...
Y-C Wu, P-Y Kuo
Developing a Novel Bio-based PF Resin as Wood Preservative and Explore its Synthesis Route Using RSM Methodology
2025 - IRG/WP 25-41046
Phenol-formaldehyde (PF) resin treatment has long been recognized as one of the most effective and widely used wood preservation methods, offering exceptional durability, dimensional stability, and resistance against biological degradation. However, traditional PF synthesis relies heavily on petroleum-derived phenol, raising concerns about environmental impact and resource sustainability. To date,...
H-C Ye, Y-C Wu, T-H Lin, P-Y Kuo