IRG Documents Database and Compendium


Search and Download IRG Documents:



Between and , sort by


Displaying your search results

Your search resulted in 921 documents. Displaying 25 entries per page.


Studies on the treatability of selected pine species and corresponding efficacies of a new non-biocidal treatment
2024 - IRG/WP 24-20721
Wood decay caused by fungi may reduce the service life of wood in outdoor applications. Since moisture conditions in wood occur as one of the most crucial parameters for fungal decay, chemical modifications, which affect the latter, may increase the resistance of wood against such organisms. Usually, pine sapwood is easier to chemically treat than heartwood, as the former generally shows good perm...
T R da Silva Lins, L Emmerich, H Militz, P H Gonzales de Cademartoni, R J Klizke, M Pereira da Rocha


Evaluation of the water exclusion ability and inherent bioactivity of heartwood against decay in Japanese and European wood species via above-ground exposure and water absorption tests
2024 - IRG/WP 24-40998
The natural durability of wood has been thought to mainly depend on bioactive extractives and the water exclusion ability. To clarify the contribution of each factor to wood durability, above-ground exposure tests were conducted on Japanese and European wood species. A double-layer test was carried out using heartwood specimens of four wood species, i.e., Japanese cedar, Japanese cypress, Scots pi...
T Osawa, R Noda, K Yamamoto


Outdoor termite resistance performance of zinc borate (Borogard® ZB) treated parallel strand lumber (PSL) – 15 years field test results
2024 - IRG/WP 24-40999
This report discloses the outdoor termite resistance performance of PSL samples treated with zinc borate at a dosage of 0.85% BAE and 1.72% BAE in Wuxi, China. The outdoor field trial lasted for 15 years and observations were made after 6 months, 3 years, 5 years 1 month, 6 years 6 months and 15 years. The retaining rates of B2O3 and ZnO in the final samples were also tested, and the hypothesis wa...
S Shi, E Laval, K Lung, F Ascherl, R Williams, W Li, X Li


Evaluation of vacuum borate treated spruce or pine CLT in an above ground protected test in southern Mississippi
2024 - IRG/WP 24-41001
Cross laminated timber (CLT) has become a popular wood composite in large building applications that were previously limited to concrete and steel. To extend service and prevent biological attack, chemical protectants are often applied to wood. Cross laminated timber panels are not typically treated, in part due to a lack of data on efficient and effective methods for treating large panels. Ther...
M E Mankowski, A Taylor, G T Kirker


Field test method for wood in above ground situation - The full CEN/TC 38 guideline for the Sandwich method. Part 1 - Determining the relative protective effectiveness of a wood preservative
2024 - IRG/WP 24-41013
The attached draft CEN Technical Specification (i.e. pre-EN standard) has been drafted in order to become an alternative to the Lap-Joint test method (EN 12037:23) for testing of wood in above ground situation and the draft CEN/TS Part 1 is specifically intended for determining the relative protective effectiveness of a wood preservative. The new draft CEN/TS is based on a test method developed by...
M Westin, R Ringman, A Christof, F Friese


Structural health assessment of wood - A comparison of methods for determining the spatial spread of fungal infestation in beams and rafters
2025 - IRG/WP 25-11051
Wood decay in buildings can cause severe economic losses, require comprehensive refurbishment, and removal of decayed wooden elements from the building. The latter aims at restoring the structural integrity of the component or the entire building through replacement, and at preventing the infestation from spreading further. In practice, components are cut out of the structure to such an extent tha...
C Brischke, N Sommerfeld, E Flohr, A K Mayer, S Bollmus


Fungal degradation of oak timber bridges
2025 - IRG/WP 25-11058
Wood is increasingly recognised as an eco-friendly building material, but its organic nature makes it vulnerable to degradation, especially in outdoor applications exposed to moisture. This study investigates wood-decaying fungi affecting oak timber bridges in Hanover, Germany. The study aimed to identify the fungal species using culture-independent methods and to examine the impact of poorly exec...
L Schrader, J Trautner, C Brischke


A comparison of methods – how to achieve a robust and conclusive durability classification of wood
2025 - IRG/WP 25-11063
The biological durability of wood is a relative and unitless size, and therefore wood species and wood-based materials are assigned to durability classes (DC). In Europe, such classes are based on a variety of measures, which can be absolute or relative to a non-durable reference species. The aim of efforts to develop and standardise methods for determining biological durability should be to ensur...
C Brischke


Evaluating the Efficacy of Arnica Extract-Based Termiticide from Berkem Biosolutions® in Subterranean Termite Control: A Comprehensive Laboratory and Four-Year Field Study
2025 - IRG/WP 25-20731
Subterranean termites pose significant threats to wooden structures. This study evaluated the efficacy of a bio-based termiticide product containing Arnica extract from Berkem Biosolutions® in controlling subterranean termites in both laboratory and field conditions. The laboratory assessments utilised “the Bottle H” test unit, adhering to the Japan Wood Preservation Association (JWPA) standa...
D Messaoudi, S Khoirul Himmi, D Tarmadi, I Guswenrivo, S Yusuf


Enhancing the Fire Resistance of Spruce Wood through Treatment and Additive Application: Small Flame Test Method
2025 - IRG/WP 25-20737
Spruce panels treated by spraying with Burnblock® spray, were tested using “Small flame test method” according to EN ISO 11925-2:2011. The fire retardant product from Burnblock ApS is reported by the Danish company to be bioderived and non-toxic. The results for the untreated planed spruce showed moderate flammability whereas the Burn Block treated panels exhibited exceptional fire resistance...
E S Mujanic, R Hasanagic, E Kerzic, L Fathi, M Humar


Securing Flame Retardancy in Wood: Durability After Artificial and Natural Weathering Test
2025 - IRG/WP 25-20738
The outdoor use of wood is often limited by challenges such as dimensional instability, vulnerability to fungal decay, and high flammability. Traditional flame retardant treatments improve fire resistance but suffer from significant leaching under environmental exposure, reducing their long-term effectiveness. This study introduces an innovative solution by integrating flame retardants with DMDHEU...
M Wu, L Martin, H Militz


Durability Analysis of Bio-based Phenol-Formaldehyde Resin-Treated Wood
2025 - IRG/WP 25-20753
The aim of this study is to explore the application of bio-based materials in outdoor construction. Enhancing the durability of wood products effectively extends their carbon storage lifespan, making it essential to investigate their long-term durability. The study used commercial resin (CPF) and laboratory-synthesised petro-based phenolic resin (LPF) as control groups. Japanese cedar specimens we...
T-H Lin, P-Y Kuo


Enhancing the Effectiveness of Penflufen by using a Plant Booster
2025 - IRG/WP 25-20759
Penflufen (Preventol® A 800) is a modern pyrazole fungicide which has been approved by the US EPA for the use in wood protection in 2018. Penflufen is an inhibitor of the succinate dehydrogenase (SDHI). It is highly efficient against wood decaying basidiomycetes fungi. In the European standard efficacy test EN 113/ EN 84, penflufen is controlling both brown rot and white rot fungi at the low rete...
D Messaoudi, A Robert, P Meckler, T Jaetsch


Performance Verification of Water-Based Outdoor Wood Protection Coatings Based on Weather Resistance Evaluation
2025 - IRG/WP 25-41015
Recent trends in wood protective coatings: Concerns over volatile organic compound (VOC) emissions and the need to reduce maintenance costs have increased demand for environmentally friendly and highly durable coatings. While conventional solvent-based paints are superior in durability, they have been associated with problems such as environmental impact and odour during application. As an alterna...
N Ikemoto


Evaluation of moisture exclusion ability of wood using double-layer outdoor exposure tests
2025 - IRG/WP 25-41021
The material resistance of wood to decay must be due to the combined effects of heartwood extractives and the moisture content state. Evaluating the moisture exclusion ability of wood is important for assessing its durability in outdoor use. We conducted previously double-layer outdoor exposure tests and investigated the relationship between moisture content over time and the progress of decay usi...
T Osawa, R Noda, K Yamamoto


AI Models for Accelerating Wood Protection Testing: Development of Predictive Tools Based on Long-Term Field Test Data
2025 - IRG/WP 25-41023
In this study, we present the development of DecAI, an artificial intelligence (AI) model designed to optimise and accelerate performance evaluations of wood protection products in the European EN 330:2014 "Field test: L-joint method." The Danish Technological Institute (DTI) compiled a dataset of over 100,000 data points from approx.10,000 L-joint samples collected over +15 years at field sites i...
J Stenbaek, B Noufel, L Glade, P Bisgaard


Durability evaluation of outdoor-exposed CLT treated with various wood presevatives using CT scans
2025 - IRG/WP 25-41035
Methods for wood preservation treatment of large materials such as Cross Laminated Timber (CLT) are limited. It is unclear which wood preservation treatment methods can effectively protect CLT from rot risk. In this study, accelerated rot tests (fungus cellar test) of CLT treated with the solvent-borne wood preservative by non-pressure treatment, named ‘deep penetration treatment’, were conduc...
Y Sakurai, T Shigeyama, Y Sugai


Non-destructive methods for field assessment of wood biodeterioration in hardwood trailer decks exposed to tropical environments
2025 - IRG/WP 25-41039
Apitong (Dipterocarpus spp.), an increasingly rare tropical hardwood from the rainforest in Southeast Asia, has long been used as decking materials for open-bed trailers and trucks across North America. As the natural population of Apitong trees steadily declines, there is an urgent need to find sustainable, domestically sourced alternatives for trailer decking. A recent project evaluated the perf...
X Wang, X Xie, G Kirker, C A Senalik


Durability Enhancement of US Hardwoods for Use in Open Trailer Decks
2025 - IRG/WP 25-41048
Apitong, a tropical hardwood derived from endangered species within Dipterocarpus genus, has long been used as a decking material for open flat-bed and lowboy trailers in the U.S. However, as more Dipterocarpus species are classified as endangered and critically endangered by International Union for Conservation of Nature (IUCN) due to the declining population of Apitong trees, there is a growing ...
X Xie, X Wang, G Kirker, C A Senalik


Migration of polycyclic aromatic hydrocarbons (PAHs) in soil from creosote-treated Douglas-fir and southern pine posts in the first 12 months since installation
2025 - IRG/WP 25-50404
Creosote is a widely used industrial wood preservative largely used for infrastructure-related applications such as utility poles, railway ties, and in marine pilings for protection against fungi, insects, and marine wood borers. Creosote is a coal tar distillate consisting of a complex mixture of organic compounds that together function as a biocide. Polycyclic aromatic hydrocarbons (PAHs) are th...
K Quigley, G Presley


Contribution of naturally durable wood use to Circular Economy - Understanding the classification system of natural durability and its variation within wood species
2025 - IRG/WP 25-50411
Total wood demand is shown by FAO to increase 49 percent between 2020 and 2050, regardless of deteriorating conditions such as deforestation and degradation due to fire and biological damages. Demand for wood as a building material is also projected by UNEP to increase significantly to 300 Gt in 2040. To address this situation, extension of the service life and re-use of wood are expected to make ...
K Yamamoto, T Osawa, R Noda


Previous Page