Your search resulted in 612 documents. Displaying 25 entries per page.
Laboratory and field evaluations of bio-based termiticide containing Arnica extract from Berkem Biosolutions® against native and Formosan subterranean termites
2024 - IRG/WP 24-11049
Arnica extract from Berkem Biosolutions® is a 100% plant-based ingredient, rich in active molecules, particularly polyphenols, specially adapted to the needs and challenges of termite protection. The efficacy performance of a bio-based termiticide product containing Arnica extract from Berkem Biosolutions® had been evaluated both in soil treatment and in wood protection treatment against native ...
D Messaoudi, J Curole, Q Wu
International joint field trial on the moisture performance of wood – Set up and first results
2024 - IRG/WP 24-40996
Wood durability to decay stems from its inherent resistance to fungi resistance to fungi. In this regard, wood's ability to withstand moisture uptake plays an important role as the lower threshold for wood decay is a moisture content of 25%. However, the aspect of moisture resistance is not yet sufficiently emphasized as a durability factor, both in the assessment of durability as a material prope...
C Brischke, et al. (33 co-authors)
Performance of Douglas-fir cross laminated timber (CLT) subjected to elevated humidity in a ground proximity field test for 6 years
2024 - IRG/WP 24-41010
The ability of insecticidal soil drenches or spray-on insecticide/fungicide treatments to protect mass timber elements exposed in a high moisture environment but out of direct soil contact was assessed using a modified AWPA ground proximity test established in 2017. Three-ply Douglas-fir CLT pieces measuring 305 x 355 x 105 mm (L x H x W) were installed at the Harrison Experimental Forest (HEF) (S...
M E Mankowski, J J Morrell, T G Shelton, G T Kirker
Determining the minimum water vapor permeability of exterior wood coatings by means of hygrothermal and decay models
2024 - IRG/WP 24-20717
The objective of this study was to determine the minimum water vapor permeability of exterior wood coatings for log homes using hygrothermal and decay modeling. The approach is based on a worst-case scenario assumption, namely a moisture trap at a given wood moisture content in a coated wall log. The minimum limit of vapor permeability of the coating system was determined by simulating the time re...
U Hundhausen, S Ullah, D Kraniotis
DURALARCH – Suitability of selected coloured coniferous heartwoods of different origin for their use in outdoor applications
2025 - IRG/WP 25-11064
For outdoor above-ground applications with high demands on biological durability, there are only a few softwoods available that also have high density and strength characteristics. One of the most important timbers with these material properties is Siberian larch (Larix sibirica, Larix gmelinii), which is available in sufficient quantities due to its large distribution area. Imports of Siberian la...
C Brischke, J Appelt, G Koch, S Majer, M Nopens, R Stirling, D Wong
Evaluating the Efficacy of Arnica Extract-Based Termiticide from Berkem Biosolutions® in Subterranean Termite Control: A Comprehensive Laboratory and Four-Year Field Study
2025 - IRG/WP 25-20731
Subterranean termites pose significant threats to wooden structures. This study evaluated the efficacy of a bio-based termiticide product containing Arnica extract from Berkem Biosolutions® in controlling subterranean termites in both laboratory and field conditions. The laboratory assessments utilised “the Bottle H” test unit, adhering to the Japan Wood Preservation Association (JWPA) standa...
D Messaoudi, S Khoirul Himmi, D Tarmadi, I Guswenrivo, S Yusuf
Mitigating the risk of decay in CLT buildings affected by trapped construction moisture using a diffusible borate preservative
2025 - IRG/WP 25-20735
Cross-Laminated Timber (CLT) is also known as a mass timber construction material. It is fabricated by gluing together multiple layers of timber lamellae with each layer oriented perpendicular to the one below it. This enhances strength, stability and dimensional rigidity. CLT is seen as an excellent ‘low carbon’ alternative to using steel and concrete and is growing in popularity as a sustain...
J R Williams
Experimental characterizing of liquid water uptake and release – key to understand moisture-induced decay risk analysis
2025 - IRG/WP 25-41020
Wood can absorb water vapour (sorption) or liquid water (capillarity). Moisture from liquid water (rain, spray water) is often a problem for the performance of wood products used in outdoor structures. Wood is prone to biodegradation when is it too moist for too long periods. Experimental studies that allow conclusions to be drawn about the practical use of wood water uptake are limited due to the...
M Nopens, J T Benthien, J Trautner, C Brischke
Evaluation of moisture exclusion ability of wood using double-layer outdoor exposure tests
2025 - IRG/WP 25-41021
The material resistance of wood to decay must be due to the combined effects of heartwood extractives and the moisture content state. Evaluating the moisture exclusion ability of wood is important for assessing its durability in outdoor use. We conducted previously double-layer outdoor exposure tests and investigated the relationship between moisture content over time and the progress of decay usi...
T Osawa, R Noda, K Yamamoto
A multi-dataset validation study of moisture prediction in Norway spruce wood exposed outdoors
2025 - IRG/WP 25-41029
Wood used in outdoor construction undergoes continuous cycles of wetting and drying, resulting in fluctuating moisture contents that directly influence its long-term durability. Excess moisture above a critical threshold leads to deterioration by fungal decay, limiting the service life of the structure. Service life models thus rely on accurate predictive models of moisture behaviour. However, cap...
J Niklewski, C Brischke
Linking treatability with moisture dynamics
2025 - IRG/WP 25-41031
Wood preservation is inherently linked to the ability to penetrate treating liquids. The EN 147374 (2022) standard provides a methodology to assess treatability and allows to identify wood species in relation to treatability classes. Over the past decades, performance of wood species in applications in use class 3 has been linked both to the impact of moisture dynamics and the resistance against f...
J Van Acker, K De Vriendt, M Durimel, L De Ligne, J Van den Bulcke
Migration of polycyclic aromatic hydrocarbons (PAHs) in soil from creosote-treated Douglas-fir and southern pine posts in the first 12 months since installation
2025 - IRG/WP 25-50404
Creosote is a widely used industrial wood preservative largely used for infrastructure-related applications such as utility poles, railway ties, and in marine pilings for protection against fungi, insects, and marine wood borers. Creosote is a coal tar distillate consisting of a complex mixture of organic compounds that together function as a biocide. Polycyclic aromatic hydrocarbons (PAHs) are th...
K Quigley, G Presley