Your search resulted in 323 documents. Displaying 25 entries per page.
What products are architects using? Relationships between deterioration part and structural performance in wooden houses
2023 - IRG/WP 23-50374
Architects work in the development of ideas around buildings and all the nuclei where human activity is generated. It is a work of organization of matter, in time and space, where the conceptual world of ideas and the aspirations of inventions, the interior world interact with the exterior in many kinds of realities.
But as architects, we have always been interested in why and how things have bee...
I de las Casas
Relationships between deterioration part and structural performance in wooden houses
2023 - IRG/WP 23-50376
Based on the survey examples, there are four patterns of deterioration that tend to occur in plywood bearing walls of wooden houses in Japan. The first is a pattern in which wall is in a whole deterioration. It is a no damage wall or test specimen. The second is a pattern in which only the sill is deteriorating. It is caused by moisture or termites from ground to the base. In addition, there is a ...
Y Ota, H Ishiyama, S Okamoto
Towards a microactuator-sensing network for the structural health monitoring of wood
2023 - IRG/WP 23-50380
Timber structures decay over time with degradation in their structural integrity. Changing environmental conditions, varying loads, exposure to moisture or insect attacks lead to changes in their vibrational response behaviour. Here we present a low-cost device used as a triggered exciter to enable the monitoring of the structural integrity of timber bearers or even power poles in electricity netw...
S Oberst, S Sepehrirahnama, C Nerse, Z Brodzeli, J C S Lai, M Mankowski, T Atkinson, R Arango, G Kirker, T Evans
Assessment of historical pilings from Lisbon
2024 - IRG/WP 24-41004
The renovation and rebuilding of areas in Lisbon has led to work on buildings constructed in the Pombaline downtown district. These buildings were constructed on wooden pilings, as a means of stabilising unstable soils and transfer the loads from buildings to soils with adequate bearing capacity. These methods also increased the resilience of the reconstruction works to future possible earthquakes...
D Jones, S Duarte, J A J Huber, L Nunes
Changes in decay risk of wood in ground contact over Europe, from analysis of historic climate conditions
2024 - IRG/WP 24-41008
Changing climate conditions will affect global temperature and precipitation patterns, shifting some geographical areas into states that are more suitable for fungal wood decay. Climate normals, which are taken over a 30-year period, capture vast spatial and temporal variations in these conditions and comparing these can show changes over time. Importantly, being able to identify locations that ha...
P B van Niekerk, B N Marais, G Alfredsen, C Brischke
Analysis and performance of spruce alternative species and discarded wood for windows production
2024 - IRG/WP 24-50386
Climate change is having a significant impact on European forestry, particularly on the softwood species used for window frames. This study investigates potential replacement tree species for spruce (Picea abies), the predominant material for window frames. We evaluate Douglas fir (Pseudotsuga menziesii), Scots pine (Pinus sylvestris), thermally modified poplar (Populus nigra) and discarded silver...
B Lesar, J Levanič, M Humar, A Treu
Structural health assessment of wood - A comparison of methods for determining the spatial spread of fungal infestation in beams and rafters
2025 - IRG/WP 25-11051
Wood decay in buildings can cause severe economic losses, require comprehensive refurbishment, and removal of decayed wooden elements from the building. The latter aims at restoring the structural integrity of the component or the entire building through replacement, and at preventing the infestation from spreading further. In practice, components are cut out of the structure to such an extent tha...
C Brischke, N Sommerfeld, E Flohr, A K Mayer, S Bollmus
Multifactorial analysis of the reasons behind wood natural durability
2025 - IRG/WP 25-11065
Physical, chemical and biological properties of several wood species were investigated in order to highlight the main factors involved in wood natural durability and wood characteristic using a principal component analysis. Interaction of wood with water were evaluated using contact angle measurements to determinate wood wettability by water and wood impregnability tests with water allowing to cal...
L-F E Nkogo, M S M Mouendou, S Dumarçay, P E Engonga, F Zannini, E Gelhaye, P Gérardin
Durability and molecular analysis of fungal communities in wood exposed above ground
2025 - IRG/WP 25-11068
The objective of the study was to explore the durability of wood exposed above ground, comprising a wide diversity of wood species and treatments and extensive assessment data on wood durability in ongoing long-term testing. Larch species and Scots pine heartwood, two tropical species ntholo and ncurri and a number of treated wood by copper-based formulations and alternatives (silanes, spiroborate...
N Högberg, D Panov, G Daniel, N Terziev
Functional Analysis of Cellobiose Dehydrogenase from the Saprotrophic Basidiomycete Coprinopsis cinerea
2025 - IRG/WP 25-11076
The plant saprophytic fungi including wood rotting fungi secrete various extracellular hydrolytic and oxidative enzymes to degrade wood cell wall. Among these, cellobiose dehydrogenase (CDH) is known as a flavoheme enzyme composed of a flavin domain with FAD and a b-type heme domain. CDH oxidises the reducing end of cellobiose, and transfers electrons to redox partners such as lytic polysaccharide...
Y Sakka, A Hosaka, M Yoshida
Durability Analysis of Bio-based Phenol-Formaldehyde Resin-Treated Wood
2025 - IRG/WP 25-20753
The aim of this study is to explore the application of bio-based materials in outdoor construction. Enhancing the durability of wood products effectively extends their carbon storage lifespan, making it essential to investigate their long-term durability. The study used commercial resin (CPF) and laboratory-synthesised petro-based phenolic resin (LPF) as control groups. Japanese cedar specimens we...
T-H Lin, P-Y Kuo
Curing Behaviour of Bio-based Phenol Formaldehyde Resin and the Durability Performance of Treated Wood
2025 - IRG/WP 25-20758
The aim of the study is to investigate the curing behaviours of bio-based PF resins treated Japanese Cedar (Cryptomeria japonica). Compared to conventional wood preservatives such as metal-based ACQ, bio-based PF resin was more environmentally-friendly and can store more plant-based carbon inside treated wood. However, all these preservatives have the risk of being leached out. This study conducte...
Y-S Lee, P-Y Kuo
Plasma Modification of Basswood Creates Super-Black Wood
2025 - IRG/WP 25-30826
A super-black wood with low reflectivity in the UV/Vis range is created by plasma modifying transverse basswood surfaces. Here the super-black wood is characterised, the process used to make it is described and its possible practical uses are discussed. Wood samples are exposed to oxygen glow-discharge plasma. Transverse surfaces exposed to high-energy plasma have a deep-black velvety appearance. ...
K J Cheng, D Feng, M Turner, L Schmidt, P D Evans
Enhancing strength, fire and biological resistance of wood through structural and chemical modification
2025 - IRG/WP 25-30831
Wood, a renewable and versatile biopolymer, has been a fundamental material to construct traditional and advanced composites for building construction, furniture, transparent composites, and various other applications. Despite its many advantages, including its aesthetic appeal, workability, and relatively low cost, wood possesses inherent limitations such as susceptibility to biological, flame an...
R Abouzeid, M S Koo, Q Wu
Experimental characterizing of liquid water uptake and release – key to understand moisture-induced decay risk analysis
2025 - IRG/WP 25-41020
Wood can absorb water vapour (sorption) or liquid water (capillarity). Moisture from liquid water (rain, spray water) is often a problem for the performance of wood products used in outdoor structures. Wood is prone to biodegradation when is it too moist for too long periods. Experimental studies that allow conclusions to be drawn about the practical use of wood water uptake are limited due to the...
M Nopens, J T Benthien, J Trautner, C Brischke
Effect of biodiesel-containing solvents on the performance of Copper Naphthenate and Pentachlorophenol: 118-month assessment and depletion analysis
2025 - IRG/WP 25-41022
Solvent systems are incredibly important in determining the performance of oilborne wood preservative systems and they can cause early failures in commodities treated with an otherwise effective preservative system. It is important to assess new solvent performance with oilborne preservative systems to ensure these systems continue to function with the changes. One solvent/preservative combination...
J Cappellazzi, M J Konkler, J J Morrell, C S Love, G Presley
A Case Study of Vogvarjeva hiša, a Local Ethnographic Museum
2025 - IRG/WP 25-41027
The Vogvarjeva hiša in Spodnje Duplje, Slovenia, is an example of traditional 18th Century wooden architecture and an important element of the region’s cultural heritage. The building was constructed from local timber on stone foundations and reflects the traditional rural building techniques of the Gorenjska region. Since it was declared a cultural monument in 1985, it has functioned as an eth...
D Kržišnik, L Kopač, D Jones, M Humar
Validation of a measurement method for cyproconazole retention in pressure-treated wood through an interlaboratory study
2025 - IRG/WP 25-41037
The Japanese Agricultural standard (JAS) defines national regulations for preserved wood and wooden materials, in Japan. Traditionally the JAS focused on quality of product, however, the revision of the JAS Act in 2017 enabled standardisation of test or measurement method for the quality evaluation. The Japan Wood Protection Association (JWPA) has been working toward standardisation of methods for...
T Miyauchi, Y Itou, M Samejima
Towards Sustainable Wood Protection: PF resins-impregnated Paper Honeycombs and the role of Processing Parameters analysis by Response Surface Methodology
2025 - IRG/WP 25-41045
Honeycomb paperboard is an important wood-derived product and also an emerging new material to combine with wood panels. It is commonly applied as cushioning materials with excellent mechanical performance, and high demands in packaging market. The aims of this study were to enhance the durability of honeycomb paperboard using PF resins of various molecular weights (Mw 200, Mw 500, Mw 700), partic...
Y-C Wu, P-Y Kuo
WoodStock: Empowering climate-smart, circular, and zero-waste use of underutilized wood from the forest and building stock in the construction sector to support the New European Bauhaus
2025 - IRG/WP 25-50405
There is a clear need for enhanced contribution of the forest-based sector to decarbonisation strategies for buildings, both in terms of operational emissions, embodied emissions, and carbon removals. WoodStock is a multifaceted project dedicated to advancing climate-smart wood construction practices in alignment with the New European Bauhaus (NEB) initiative. A primary focus is the quantification...
L De Ligne, J Van Acker, J Van den Bulcke
Hyperspectral imaging in qualitative and quantitative assessment of biocide treated timber
2025 - IRG/WP 25-50407
A hyperspectral camera operating in the shortwave infrared light range between 1000 – 2500 nm was used to collect spectral profiles of timber treated with different biocides and varying concentrations of a copper-ethanolamine based wood preservative. The spectra were analysed using statistical methods like principal component analysis, linear discriminant analysis, and partial least squares to a...
J Levanič, E Keržič, B Lesar, M Humar
Physical and chemical characterization of post-consumer wood chips for recycling
2025 - IRG/WP 25-50414
Post-consumer wood (PCW) is a valuable resource that can partially substitute virgin wood in material applications. This communication paper presents key findings from a study that analysed PCW collected from three recycling facilities in southeastern Norway over eight months. A total of 20 mixed and 4 pre-sorted PCW samples were evaluated regarding their material composition, particle geometry, a...
M Altgen, K Bringdal Gedde, L Ross, E Larnøy
Analysis of A Wooden Structure Damaged in a Fire – The Wooden Granary at Zaprice, Kamnik
2025 - IRG/WP 25-41049
Zaprice Open-Air Museum in Kamnik, Slovenia, features several granaries dating to the early 19th century, forming part of the national Cultural Heritage Register (EID: 1-09881). One of the two-chamber wooden granaries, constructed in 1828, suffered significant fire damage in December 2024. The objective of this study was to evaluate the extent of the damage, assess the structural integrity, and id...
M Humar, B Lesar, L Kopač, A Žagar