Your search resulted in 3511 documents. Displaying 25 entries per page.
Barriers of polyglycol/borate treated wood prevent termite attack to untreated wood above them in 10-year field tests
2024 - IRG/WP 24-20709
As a pioneer in wood protection and borate research Terry Amburgey, a lifetime member of the IRG, had many projects where borates were used in subsequently commercially very successful applications. This paper is one of the initial research projects that lead to polyglycol borates being used as a standalone treatment to protect against termites in new homes which has now been well proven over the ...
K W Ragon, J D Lloyd, T L Amburgey
Potential of heartwood extracts as wood preservatives combined with linseed oil in 8-year above-ground and in-ground field trials
2024 - IRG/WP 24-20719
The current study assessed the efficacy of heartwood extracts from Tectona grandis, Dalbergia sissoo, Cedrus deodara, and Pinus roxburghii, combined with linseed oil, as protectants for two non-durable wood species against termites and decay fungi. Stakes measuring 45.7 × 1.9 × 1.9 cm and blocks measuring 12.5 × 3.75 × 2.5 cm of the sapwood of southern pine (Pinus sp.) and cottonwood (Populus ...
M E Mankowski, G T Kirker, B Hassan
EMC as a quality control parameter for thermally modified wood
2024 - IRG/WP 24-20720
While standards for quality performance of treated wood have been in place for many years, none have been developed for modified wood such as thermally modified wood (TMW). Only in one case has TMW been listed in 2018, by the Nordic Wood Preservation Council (NWPC).
A key component of a quality system is its control parameters, i.e. the metrics that are to be measured and controlled. Existing m...
P Klaas, J T Lauridsen
Studies on the treatability of selected pine species and corresponding efficacies of a new non-biocidal treatment
2024 - IRG/WP 24-20721
Wood decay caused by fungi may reduce the service life of wood in outdoor applications. Since moisture conditions in wood occur as one of the most crucial parameters for fungal decay, chemical modifications, which affect the latter, may increase the resistance of wood against such organisms. Usually, pine sapwood is easier to chemically treat than heartwood, as the former generally shows good perm...
T R da Silva Lins, L Emmerich, H Militz, P H Gonzales de Cademartoni, R J Klizke, M Pereira da Rocha
Phytosanitary heat treatment of wood in a laboratory drying oven and, in a pilot-scale kiln using the house longhorn beetle (Hylotrupes bajulus) larvae as a model
2024 - IRG/WP 24-20722
International trade in wood products brings the risk of the movement of tree pests which can cause devasting ecosystem and economic damage. International phytosanitary guidelines were created to help countries that import wood products. Import requirements intend to minimize pest spreading. Thus, the ISPM 15 (International Standards for Phytosanitary Measures No. 15) which specifies the “Regulat...
B Rubio, C L’Hostis, M Montibus, I Paulmier, C Brunet, L Charron, J-P Gaussorgues, C Guiberteau, V Vlahakis, F-R de Cibon, I Le Bayon
Citric acid and sorbitol treatment: A comparative study of Canadian and Norwegian species
2024 - IRG/WP 24-30806
Dimensional instability can reduce the competitiveness of wood in exterior applications such as cladding and decking. The objective of this work was to evaluate the dimensional stability of permeable and refractory softwoods from Europe and North America modified via a sorbitol and citric acid treatment. White spruce and Norwegian spruce, refractory species, and jack pine and Scots pine, relativel...
D Schorr, Erik Larnøy, R Stirling, G Boivin
A novel treatment for increasing UV stabuility of wood based on citric acid and urea
2024 - IRG/WP 24-30811
Wood, a fundamental material in the Built Environment, faces challenges related to durability and weathering, notably UV degradation leading to colour changes. This study explored a novel treatment method utilising citric acid and urea to enhance the UV stability of wood. The reaction between these compounds forms fluorescent species and insoluble nanoparticles upon thermal treatment. Two treatmen...
S Jué, A Scharf, C-F Lin, R Moutou Pitti, D Sandberg, D Jones
Phytosanitary treatment of roundwood for oversea shipping - on the suitability of dry heat treatment as alternative to climate-change effective fumigation
2024 - IRG/WP 24-50394
The transcontinental trade of roundwood requires thorough phytosanitary treatment to protect native flora and fauna against foreign pests. This is generally done by fumigating shipping containers packed with roundwood with sulfuryl fluoride, a potent greenhouse gas. After treatment, the gas is released into the atmosphere, causing massive emissions. Since 2017, the usage of sulfuryl fluoride in th...
G Weber, L Schrader, J Trautner
Structural health assessment of wood - A comparison of methods for determining the spatial spread of fungal infestation in beams and rafters
2025 - IRG/WP 25-11051
Wood decay in buildings can cause severe economic losses, require comprehensive refurbishment, and removal of decayed wooden elements from the building. The latter aims at restoring the structural integrity of the component or the entire building through replacement, and at preventing the infestation from spreading further. In practice, components are cut out of the structure to such an extent tha...
C Brischke, N Sommerfeld, E Flohr, A K Mayer, S Bollmus
Enhancing the Fire Resistance of Spruce Wood through Treatment and Additive Application: Small Flame Test Method
2025 - IRG/WP 25-20737
Spruce panels treated by spraying with Burnblock® spray, were tested using “Small flame test method” according to EN ISO 11925-2:2011. The fire retardant product from Burnblock ApS is reported by the Danish company to be bioderived and non-toxic. The results for the untreated planed spruce showed moderate flammability whereas the Burn Block treated panels exhibited exceptional fire resistance...
E S Mujanic, R Hasanagic, E Kerzic, L Fathi, M Humar
Citric acid/urea derivatives as an anti-discolouration treatment for wood surfaces
2025 - IRG/WP 25-20741
The exterior-use wood faces raining and sunlight exposure, which can cause property changes of the wood, such as the discolouration, dimensional instability, and biological attack. This article explores the use of citric acid and urea as surface protection of wood. The heating of citric acid and urea can result in the fluorescent carbon dots. These carbon dots can absorb UV light with the emission...
C-F Lin, O Myronycheva, D Jones, O Karlsson
Influence of incising methods and wood moisture content on ‘deep penetration treatment’ in Japanese cedar and larch
2025 - IRG/WP 25-20749
To expand applicability of ‘deep penetration treatment’, a solvent-borne and non-pressure treatment that is commonly coupled with roller-type incising using a flat blade, we investigated drill and laser machining as alternative incising methods and examined the influence of wood moisture content on the preservative penetration. Various incising methods were applied to heartwood of Japanese ced...
S Taira, T Miyauchi, S Isaji, H Matsunaga
The iTrussT project – Advancements in timber bridge design, preservation, and monitoring
2025 - IRG/WP 25-20751
The Norwegian research project iTrussT (2025–2028) aims to advance timber bridge design and unlock wood’s full potential as a sustainable solution for modern infrastructure. It addresses three critical challenges: First, fatigue testing of glued laminated timber lamellae will provide deeper insights into shear failure mechanisms, supporting the development of safer, more efficient structures a...
K-C Mahnert, U Hundhausen
Sustainable and environmentally friendly bio-based protection against fire
2025 - IRG/WP 25-20756
Flame-retardant agents are used to confer fire resistant properties with effects strongly dependent on their ability to form char during the thermal degradation. The char coats the polymeric materials and provides a good barrier against heat and oxygen diffusion, thus reducing the combustion rate of the polymeric materials. Halogenated agents that are used today are toxic and may cause severe heal...
M Tanase-Opedal, A Larsson, P O Flaete
Chestnut tannin-furfurylic resins for wood preservation: influence of the proportion of tannins as a copolymer
2025 - IRG/WP 25-30816
Tannin, which is present in all plants, is the most abundant polyphenol globally and can be extracted using water or organic solvents such as acetone, ethanol and methanol. Tannins are classified into two categories: condensed tannins (catechin-based polymers) and hydrolysable tannins (sugar esters with galloyl units). Previous studies have demonstrated its potential as a raw material for modifyin...
J V Dorini-Falavinha, C Gerardin-Charbonnier, P Cademartori
Enhanced Termite Resistance of Low Durability Fast Growing Teak Wood by Non-Biocide Treatments Based on Chemical and Thermal Modification
2025 - IRG/WP 25-30818
Short rotation teak as a fast-growing tree can be considered as a renewable material resource for the future green economy. However, short rotation teak wood is susceptible to biodeterioration, particularly to termite attack. The objective of this work was to investigate the effect of chemical and thermal treatment on resistance of sapwood, transition wood, and heartwood of short rotation teak aga...
R Martha, K Candelier, M-F Thévenon, B George, I S Rahayu, W Darmawan, P Gérardin
Influence of plasma treatment on the coatability of wood primer with a topcoat for exterior use
2025 - IRG/WP 25-30828
The coatability of oil, or of solvent-borne alkyd resin wood primers with waterborne acrylic finish is the subject of much debate, but not much information can be found in the scientific literature on this topic. The aim of our study was therefore to evaluate the adhesion strength of the waterborne acrylic coating on oiled wood or wood with a solvent-based alkyd primer and to test the recoatabilit...
M Petrič, L Albreht, N B Štrus, E Keržič, M Pavlič, J Žigon, S Dahle
ProFume® pre-shipment treatments of round wood against infestations with bark-breeding beetles - technical improvements
2025 - IRG/WP 25-41017
Since 2018, climate change and temperature shifts associated with this, increased the occurrence of bark-beetle induced calamity wood. Consequently, the significant Ips typographus outbreak in German spruce forests prompted harvesting, thus temporarily increasing timber market supply. This situation made Germany a key player in Europe’s log exports to China. In order to prevent the further sprea...
S Kümmritz, G M Kroos
Non-destructive methods for field assessment of wood biodeterioration in hardwood trailer decks exposed to tropical environments
2025 - IRG/WP 25-41039
Apitong (Dipterocarpus spp.), an increasingly rare tropical hardwood from the rainforest in Southeast Asia, has long been used as decking materials for open-bed trailers and trucks across North America. As the natural population of Apitong trees steadily declines, there is an urgent need to find sustainable, domestically sourced alternatives for trailer decking. A recent project evaluated the perf...
X Wang, X Xie, G Kirker, C A Senalik
Considerations on how different preservation processing methods of logs would have different effects on wood structures
2025 - IRG/WP 25-41040
Azekura-zukuri style wood structures (hereinafter referred to as azekura-style structures) have been utilized in forest conservation projects in Japan as substitutes for concrete structures. We estimate that making use of thinned and small logs for azekura-style structures has positive impact on circular economy and carbon fixation and contributes to the biodiversity within their areas. In additio...
Y Iijima
Bio-Based but Toxic? The Neglected Ecotoxicity of Leachates from Wood Preservatives—A mini-review
2025 - IRG/WP 25-50403
Bio-based Wood preservatives, derived from renewable biomass, are emerging as promising alternatives to traditional synthetic wood preservatives. Research groups all around the world are studying the development of bio-based – environmentally friendly – wood preservatives and their fixation to wood finding natural compounds with very promising wood preserving potential. However, there is a ver...
A Barbero-Lopez, A Haapala
Danish wood preservatives approval system with special focus on assessment of the environmental risks associated with industrial wood preservatives
2001 - IRG/WP 01-50166-01
The following is a description of the procedure used by the Danish Environmental Protection Agency to assess the environmental risks associated with preservatives used in the pressure impregnation of wood. The risk assessment covers issues considered to be of significance for the environment and which are adequately documented so as to allow an assessment. Such issues are persistence and mobility ...
J Larsen
Data sheet on wood-boring insects. Apate monachus Fabricius. 2. Position systématique, nomenclature, identification et distribution - Espèces végétales attaquée
1981 - IRG/WP 1105
R L A Damoiseau
Proposal for further work on accelerated ageing
1988 - IRG/WP 2314
M-L Edlund
Confocal laser scanning microscopy of a novel decay in preservative treated radiata pine in wet acidic soils
1997 - IRG/WP 97-10215
Light microscopy of radiata pine (Pinus radiata D. Don) field test stakes (20x20x500mm3) exposed in wet acidic (pH 3-4) soil for 12 - 24 months showed predominance of an unusual type of decay characte-rised by tunnelling attack of wood cell walls. After two years decay was moderate to severe in wood treated to ground contact CCA specifications and also equivalent retentions of creosote, and a numb...
R N Wakeling, Ying Xiao, A P Singh