IRG Documents Database and Compendium

Search and Download IRG Documents:

Between and , sort by

Displaying your search results

Your search resulted in 177 documents. Displaying 25 entries per page.

Antagonistic effects of a range of fungi to Serpula lacrymans
1996 - IRG/WP 96-10156
Certain fungi have been demonstrated to exhibit antagonism towards Serpula lacrymans in culture. Species from the genera Trichoderma, Gliocladium, Penicillium and Hypomyces were among those exhibiting the strongest antagonism. Certain species showed antagonism in a range of media of varying nutritional status. The possible role of antagonistic fungi as biocontrol agents for Serpula lacrymans is discussed.
P Rattray, G McGill, D D Clarke

Experience with an industrial scale-up for the biological purification of CCA-treated wood waste
1997 - IRG/WP 97-50095
The biological purification of CCA-treated wood waste was tested in co-operation of the BFH and the Italian impregnation plant SoFoMe. Chipped poles were infested with the chromium and arsenic tolerant brown-rot fungus Antrodia vaillantii which can transform in the laboratory ca. 90% of the chromium and arsenic into watersoluble salts. These can be leached to 100-200 ppm residual metal content. The fermentation techniques tested will be described and the fermentation success as well as the possible use of the purified material will be discussed.
H Leithoff, R-D Peek

Antagonistic effects of Dacrymyces stillatus against growth of other fungi
1991 - IRG/WP 2363
The antagonistic effects in dual cultures on malt extract agar of 5 wood decay fungi and the antagonistic effects of Dacrymyces stillatus against 1 mould fungus and 1 blue stain fungus were determined. Dacrymyces stillatus was the only fungus which exhibited clear antagonistic effects. The effects of Dacrymyces stillatus against the different test fungi varied however to a great extent. Dacrymyces stillatus exhibited clear antagonism against brown rot fungi and a weaker effect against a mould fungus and a blue stain fungus. The antagonistic effect against a white rot fungus was weaker in dual culture. Spore germination of the responding white rot fungus Pycnoporus cinnabarinus was completely inhibited on an agar overlay over a culture of Dacrymyces stillatus on malt extract agar. Inhibitory activity was present in extracts.
J Bjurman

Improvements of monitoring the effects of soil organisms on wood in fungal cellar tests
1996 - IRG/WP 96-20093
Accelerated testing the durability of preservative treated timber in a so called "fungal cellar" or "soil-bed" to evaluate its performance in ground contact is widespread practice. In order to obtain a more accurate and reproducible estimate of preservative performance, several institutes, among them the BAM in Berlin, have routinely carried out static bending tests in addition to visual examination. These tests were usually performed with a defined maximum load or deflection path regardless of the remaining degree of elasticity of the test specimens. Recent studies at the BAM revealed that by modifying the method, i.e. by restricting the applied load to the non-destructive interval for each individual test specimen, the calculated modulus of elasticity (MOE) reflect the changing strength properties caused by biological deterioration and allow within a relatively short time valuable predictions on the service life of the treated timber in soil contact.
I Stephan, S Göller, D Rudolph

A discussion on causes, effects and remedies of arsenic pollution of groundwater in Bangladesh
1998 - IRG/WP 98-50102
This paper includes possible causes, effects and remedies of arsenic pollution of groundwater in Bangladesh, extracted mostly from the international conference held in Dhaka in 1998. Next possible key steps have been suggested based on scientific principles and experience. The release of arsenic from underground sediment would be due to excessive mechanical forces, geochemical and geobiological reactions. Arsenic free water will cure acute patients and will save future generations. Use of suitable organic chemicals, organic matters, biological control system would be widely acceptable for supplying arsenic free water. Other natural sources of water can be used easily and safely without mechanical and chemical processes. The problems of chronic patients would be solved genetically, enzymatically and nutritionally.
A K Lahiry

Effects of acetylation on the dimensional stability and decay resistance of kenaf (Hibiscus cannabinus L.) fiberboard
1996 - IRG/WP 96-40059
The objective of this study was to investigate the influence of the acetylation treated kenaf fiber, Phenol formaldehyde resin content level, and three fungi species on the dimensional stability and decay resistance of high density non wood composition boards. A standard ASTM method was used to evaluate weight loss and thickness change. The linear shrinkage and expansion of each species were also determined. All specimens were exposed to decay chambers for 16 weeks. Test results indicated that most of the main factors significantly influence the thickness, length changes, and decay resistance of the high density kenaf fiberboards.
P Chow, T Harp, R Meimban, J A Youngquist, R M Rowell

Leaching of components from water-borne paints and fungitoxic effects
1995 - IRG/WP 95-20062
Water-borne model paints, acrylics and alkyd emulsion paints, of known composition were leached according to a procedure modified in accordance with ASTM 6271.1. The effectiveness of fungicidal compounds in the painted specimens before and after leaching was evaluated with a biotest in which Penicillium brevicompactum was used as a test fungus. The leaching of the fungicide Troysan Polyphase according to the biotest varied to a high extent depending on differences in paint composition. Fungicide efficiency in relation to paint formulation and fungicide mobility in a paint film is briefly discussed.
J Bjurman

The evaluation of synergistic effects of chemicals on fungicidal efficacy in crossed-paper tests
1991 - IRG/WP 2383
The mixing effects of wood preservatives were evaluated using the crossed-paper technique. Two filter paper strips (0.7 x 8 cm²) were treated by soaking with different chemicals [fungicides, a termiticide (chlorpyrifos or phoxim), a surface-active agent, a synergistic agent, and a stabilizer], and placed at right angles to each other on a fully grown mycelial mat of a test fungus in a Petri dish. When the four organoiodine fungicides were incorporated with chlorpyrifos or surface active agent, only 3-iodo-2-propynyl butyl carbamate (IPBC) showed the desirable synergistic effect against every wood-decaying fungus tested. Other fungicides did not always tend to produce the synergistic effect with the addition of a surface active agent. 4-Chlorophenyl-3-iodopropargyl formal (IF-1000) appeared to indicate an undesirable antagonistic effect when mixed with either chlorpyrifos or a surface active agent. 3-Bromo-2, 3 diiodo-2-propenylethyl carbamate (EBIP) did not show any synergistic action by mixing with chlorpyrifos and/or a surface active agent, although the fungicidal enhancement was induced satisfactorily by mixing the fungicide with chlorpyrifos, a stabilizer and/or a synergistic agent, especially against Tyromyces palustris and Coriolus versicolor. Similarity of the results obtained in the present investigation and in the previous laboratory decay tests leads to the conclusion that the crossed-paper technique is suitable for the evaluation of the mixing effect of chemicals on fungicidal efficacy.
Dong-heub Lee, K Tsunoda, M Takahashi

An investigation of the effects of pre-steaming on the treatment of sawn spruce timber with Celcure A, a copper-chrome-arsenic preservative
1981 - IRG/WP 3150
Difficulties in the treatment of spruce using standard vacuum/pressure techniques with both water-borne and organic solvent preservatives are well known. We have evaluated the influence of steaming on treatability with a waterborne CCA preservative.
C R Coggins

Effects of various preservative treatments on the mechanical and physical properties of plywood
1993 - IRG/WP 93-40007
The technical properties of plywood are related to both the intrinsic characteristics of its composing wood species and the quality and performance of the glue bond which acts as an interface between veneer sheets. Consequently mechanical and physical testing and glue bond strength analysis offer an appropriate means for studying the effect of preservative treatments on the overall quality of plywood. A range of boards was treated with waterborne and oilborne preservatives. Changes in modulus of elasticity, modulus of rupture and tensile strength were noted as well as variations in physical properties. Analysis of the glue bond strength was done by shear strength testing and determination of the amount of wood failure after different ageing procedures.
J Van Acker, M Stevens

Effects in vivo of various tensides (surface-active agents) on Reticulitermes santonensis De Feyteaud
2001 - IRG/WP 01-10417
The results of studies of surface active agents (tensides, surfactants) on the feeding behavior and mortality of Reticulitermes santonensis De Feyteaud are described. The effects of these agents on the nature and relative populations of eight gut-inhabiting symbionts are also examined. Among the various tensides tested, bee's poison was the most effective in causing rapid termite death. All surfactants were detrimental to the flagellated symbionts. The differences in magnitude and rapidity of the symbionticidal effects are described and discussed.
W Unger

Effects of a chitin synthesis inhibitor on spore germination of the decay fungi Gloeophyllum trabeum and Poria tenuis
1986 - IRG/WP 2253
This study sought to determine the effect of a chitin synthesis inhibitor - Polyoxin D, on spore germination and early hyphal development of a brown rot and a white rot fungus in-vitro. Polyoxin D is a competitive, substrate-analogue type of chitin synthtase inhibitor (2). The drawbacks to use of such a compound as a wood preservative tie. cost - $20,000/g, possible leaching or degradation) might be reduced should it be effective in preventing decay initiation by spore germination at very low concentrations.
E L Schmidt

Synergistic effects between 2-HPNO, Irganox 1076 and EDTA on the inhibition of wood degradation by Coriolus versicolor
2004 - IRG/WP 04-30331
The efficiency of 2-hydroxypyridine-N-oxide (2-HPNO) as wood preservative has been investigated. As shown using classical experiments as well as using response surface methodology, the efficiency of 2-HPNO as wood preservative is strongly improved in presence a chelator like EDTA and/or of Irganox 1076 an industrial antioxidant. In these conditions, wood preservative efficiency of the mixture the three previous compounds is quite similar to that of tebuconazole used alone. 2-HPNO exhibits an hydroxamic acid function and is a susbtrate of fungal peroxidase. These properties could explain the observed synergy. The implications of these data for the design of new wood preservation strategies are also discussed.
A Mabicka, S Dumarçay, N Rouhier, M Linder, J P Jacquot, P Gérardin, E Gelhaye

Analysing the characteristic role of moisture content for drying and fluid flow in Sitka spruce. - Part 1: The drying process of sapwood and heartwood of two different thickness of Sitka spruce using a kiln. - Part 2: Effects of moisture content on longitudinal permeability of Sitka spruce in vertical variation of the tree
2000 - IRG/WP 00-40173
The characteristic role of the moisture content in Sitka spruce (Picea sitchensis (Bong.) Carr.) that grown in the United Kingdom was examined by this study on the basis of (1) the reduction of moisture content in two different thickness of sapwood and heartwood by kiln drying process, and (2) the effects of moisture content to the longitudinal void volume filled of tanalith-C by the full-cell process from base (1 m) to apex (3 m) of the tree in sapwood zone. Accordingly, conclusions on indication of the drying process of sapwood and heartwood, and vertical variation of longitudinal flow with effects of moisture were listed separately: (1) Comparison of Drying Characteristic of Sapwood and Heartwood: The two different thickness (300x30x30 mm3 and 300x20x20 mm3) of sapwood and heartwood of Sitka spruce was dried using the suggested drying schedule in kiln. The reduction of moisture was schematically diagrammed according to sapwood and heartwood stakes. The reduction of moisture followed the same downward trend that sapwood (S) loses more moisture than heartwood (H) although the small stakes of S and H lost moisture rapidly compared with the large ones. (2) Vertical Variation of Moisture Content and Longitudinal Permeability: The 90 kiln dried defect free sapwood stakes (150x25x25 mm3) of Sitka spruce was taken from base to apex of the trees at 1, 2 and 3 m above ground level. After having the determination of moisture content in each experimental stake, the treatment was carried out by the full-cell process with CCA preservative (Tanalith-C) using a model pressure treatment plant. Significant differences observed among the tree heights from 1 to 3 m showing that slightly increases of moisture content from base to apex and conversely decreases of longitudinal void volume filled by preservative fluid.
I Usta

Effectiveness and synergistic effects between copper and polymer betaine
1996 - IRG/WP 96-30097
Different formulations of "Copper Amine" and Polymer Betaine were studied. During laboratory tests a synergism between both active ingredients against soft rot and dry rot has been found. The efficacy against soft rot according to the "BAM method" and the European Standard ENV 807 depends only on the amount of copper. Long term tests in a fungus cellar for determining the relative protective effectiveness in ground contact show similar results as CCA-treated wood.
H Härtner, V Barth

The effects of heat treament on the specific gravity of beech and spruce wood
2003 - IRG/WP 03-40254
The effects of heat treatment on specific gravity of beech (Fagus orientalis) and spruce wood (Picea orientalis) naturally grown and intensively used in forest products industry in Turkey were studied. The wood samples were cut into 2 x 2 x 3 cm. Heat treatment was than applied to the wood samples at four different temperatures (130 °C, 150 °C, 180 °C and 200 °C) and three different durations (2 h, 6 h and 10 h) under air atmospheres. The results indicated that the specific gravity values treated by heating generally exhibited a decrease with increasing the exposure durations and temperatures compared to the untreated wood samples.
S Yildiz, Ü C Yildiz, G Colakoglu, E D Gezer, A Temiz

Research on the effects of wood preservatives on the physical and mechanical properties of Iranian beech (Fagus orientalis Lipsky)
1985 - IRG/WP 3351
This research work was conducted with the aim of using preservatives such as Basilit and Wolman Salts with Iranian beech and to study any physical and mechanical changes these might have on the beech species of Iran. Samples were divided into three groups; one group were used as untreated controls, the second group was treated with Basilit and the third group was treated with Wolmanit. Results obtained according to the AFNOR French system of standards were: (1) After 140 days the moisture content of each group had reached 7.3%. (2) Samples with Wolmanit absorbed twice as much as those with Basilit and the two groups has some differences in specific gravity. (3) The volumetric shrinkage of wood preserved with Wolmanit was one fifth of that treated with Basilit. (4) In bending tests the samples treated with Wolmanit had more strength up to point of rupture than those preserved with Basilit. (5) The modulus of elasticity was more in samples preserved with Basilit than in those preserved with Wolmanit. (6) In compression parallel to the grain the samples impregnated with Basilit had more resistance than in those impregnated with Wolmanit. (7) In tension tests, the samples preserved with Basilit were stronger than those treated with Wolmanit. (8) In impact bending tests, the Basilit samples were stronger than the the Wolmanit ones. (9) In hardness tests, the resistance to indentation was less with the samples treated with Basilit than with those treated with Wolmanit; the Basilit seems to make the wood softer and from this result this type of treated wood could be recommended for use by carpenters and in woodworking shops.
P Niloufari

Effects of pretreatments for the amelioration of preservative impregnability using the Oscillating pressure method (OPM)
1995 - IRG/WP 95-40044
For the purpose of an amelioration of preservative impregnability, three types of pretreatment: the steaming, the explosion and the boiling, were tested. The specimens were prepared by the domestic four species: Itajii, Ryukyumatsu, Sugi and Hinoki, and 1 refractry imported species: Douglas-fir. The dimension of specimens was 20 x 20 x 300 mm³ and were treated with CCA in a laboratory OPM machine. Three OPM schedules and Bethel process without after vacuume were tested in this experiment. The results obtained were follows: 1. In the case of the treatment of green woods, the calculated retentions of preservatives based on those initial mass, were periodically slowly increased or sometimes decreased. This reason was considered the replacement of the free water in wood to the preservative solution. The sapwood of rather easy treatable species like Ryukyumatsu, was obtained good penetration by Bethel process. The sapwoods of treatable species like Sugi and Hinoki, were obtained best penetration by OPM-1 or by OPM-2. The combination of the steaming and the OPM was rather good results for all species tested of green woods. 2. In the case of the treatment of the air-dried woods, the combination of the steaming and the OPM was obtained rather good results for all species tested included the refractry specimens like Douglas-fir.
K Suzuki, I Asaoka, S Tani, K Okada, T Hidaka

Influence of storage on mould susceptibility of wood at relative humidity values lower than 100%
1989 - IRG/WP 1413
It is well known that wood material changes with time because of different environmental influences. The effects of such changes on the subsequent mould susceptibility are less known. In this paper we report on increased mould susceptibility of pine wood after storage. Mould growth was detected by indirect methods.
J Bjurman

Preventive action against fungal decay: A comparative experiment on the effects of natural and artificial infection of wood by Basidiomycetes
1981 - IRG/WP 2160
M Fougerousse

Antagonistic effect of some mycorrhiza fungi as biological control of blue-stain
1987 - IRG/WP 1314
This report discussed the possibility of using some mycorrhiza fungi as biological control of blue-stain. The results show that new bio-technological possibilities are opening, because, by cultivating antibiosis fungi in fermentor, it is possible to prepare extracts which can then be used as the natural preservative to control the blue-stain in wood.
R Benko

Phytotoxic effects of preservative treated props for agricultural use
1989 - IRG/WP 3550
The phytotoxic effect due to the use of wood treated with organic preservatives for agricultural purposes was studied. The assays were carried out on plants tutored with props of Pinus sylvestris treated with three different organic wood preservatives. Pre-assays were carried out to observe the reaction on the plants, spreading directly the preservative on different parts of the plant and to the substrate.
D Franco, M V Baonza Merino

Effects of timber surface properties and dipping conditions on uptake of antisapstain actives from two aqueous suspensions, and ultimate effects on efficacy against mould and staining organisms
1995 - IRG/WP 95-30073
Green-off-saw rough sawn Pinus elliottii (slash pine) boards were dipped in aqueous suspensions of two antisapstain formulations, and the resultant surface retentions of active ingredients MTC (methylene bisthiocyanate), CTL (chlorothalonil) or TCMTB (2(thiocyanomethylthio)benzothiazole) were monitored by chemical analysis. Surface retentions increased with suspension concentration and surface roughness, and decreased with initial timber moisture content. Dipping time beyond 20 seconds, timber basic density and earlywood content had little effect. Relatively low surface retentions, produced by dipping smoother boards with higher initial moisture contents, provided lower protection against mould and stain during seasoning than higher retentions. Equations describing the effect of surface retention on efficacy were developed for both formulations, and retentions providing complete protection under the conditions of the test were determined.
M J Kennedy, T L Woods

The effects of heat treatment on the toughness of beech wood
2004 - IRG/WP 04-40283
The effects of heat treatment on toughness of beech (Fagus orientalis) wood naturally grown and intensively used in forest products industry in Turkey were studied. The wood samples were cut into 5 x 5 x 5 cm. Heat treatment was than applied to the wood samples at three different temperatures (130 °C, 150 °C and 180 °C) and three different durations (2 h, 6 h and 10 h) under air atmospheres. The results indicated that the toughness values treated by heating generally exhibited a decrease with increasing the exposure durations and temperatures compared to the untreated wood samples.
S Yildiz, Ü C Yildiz, E D Gezer, Ali Temiz, E Dizman

Combined effects of the treatment of wood with formaldehyde
1978 - IRG/WP 3117
Treatment of fibrous materials with reagents in a vapor phase is neither new nor unique. Numerous examples exist in literature of vapor phase experiments on cellulose fibers and fabrics, and on wood. For many years the textile research and industry have used vapor phase processes for the treatment of textiles. The chemical modification of cellulose is based on different types of reactions e.g. esterification, alkylation, resin formation or polymerization, monomer grafting and crosslinking. Vapor phase treatment of wood offers certain potential advantages over the conventional liquid phase wood impregnation. The higher mobility of low molecular weight compounds in the gaseous state ensures a rapid, uniform and homogeneous distribution throughout the wood structure. The vapor phase treatment of wood is also a better approach from the standpoint of cell wall penetration. Bulking, which takes place in the cell wall only, means that less chemicals are required and that the final weight of the composite is limited. Furthermore, due to the low viscosity of a gas, the application of a lower pressure differential remains possible. Within the framework of a wood improvement programme carried out at the Laboratory of Wood Biology and Wood Technology (University of Ghent, Belgium) the treatments were based on the impregnation of wood with liquid synthetic monomers and with gaseous formaldehyde. The results of the hygroscopic and dimensional behaviour of the wood-plastic-combinations have been published previously. Other papers deal with the physical and chemical interactions between the synthetic products and the natural polymers of the cell wall. This contribution will be restricted to the treatment of wood with formaldehyde in the gaseous state.
M Stevens, J Schalck

Next Page