Your search resulted in 244 documents. Displaying 25 entries per page.
The effect of treatment method on CCA efficacy in Corsican pine
1992 - IRG/WP 92-3723
As part of a study into the influence of application method on preservative efficacy Corsican pine (Pinus nigra) samples (50 x 50 x 400 mm³) were treated with a CCA formulation using Bethel, Steam/Bethel or Lowry processes. Full penetration of the preservative at a gross level was confirmed using a copper disclosing reagent. The preservative was allowed to fix and then samples were converted into mini-blocks (30 x 10 x 5 mm³) to produce decay test samples from various locations within the larger samples. After leaching, sets of replicate mini-blocks were exposed to the decay fungi Coniophora puteana FPRL 11E, Coriolus versicolor FPRL 28A, and Chaetomium globosum FPRL S70K. Equivalent sets of leached blocks, were analysed using atomic absorption spectrophotometry to determine preservative concentration and balance. The results of this study have been used to assess the effect of preservative application method on CCA efficacy. They also indicate how treatment method affects the distribution of the active elements of the preservative throughout the treated wood.
P R Newman, R J Murphy
Resin bleed after light organic solvent preservative treatment - the effect of drying method and process type
1986 - IRG/WP 3378
The effects of drying method and treatment process type on resin bleed were investigated. High-temperature drying of resinous radiata pine (Pinus radiata D. Don) heartwood resulted in improved wood permeability, higher preservative uptake, and greater resin bleed when treated by the Rueping process. Resin bleed was reduced substantially when timber was treated by the Lowry process, and totally eliminated when Bethell-treated. The incorporation of 2% wax into the preservative formulation may control resin bleed after Rueping treatment.
Microwave conditioning of Pinus radiata D. Don for preservative treatment
2000 - IRG/WP 00-40182
This paper reviews the effect of pressure steam conditioning on the permeability and treatability of green radiata pine heartwood and the potential for substituting microwave conditioning for steaming. The penetration of liquids into radiata pine occurs mainly in the radial tissue. The permeability of green radiata pine improves following steam conditioning by blowing out the soft radial tissue. The moisture content of the wood is also reduced following steam conditioning thus increasing the air void volume available for liquid penetration. Intensive microwave irradiation is found to improve the permeability of radiata pine and reduce wood moisture content concurrently thus facilitating immediate impregnation with wood preservatives.
P Vinden, G Torgovnikov, J Romero
Treatment application method and CCA efficacy in Corsican pine - Assessment by serial exposure and soil burial tests
1993 - IRG/WP 93-40006
A previous report on this research (Newman and Murphy, 1992) identified possible variation in the efficacy of a CCA preservative applied to Corsican pine (Pinus nigra var. maritima) dependant upon the treatment application method (Bethel, Lowry or Steam/Bethel). This paper presents further data from biological testing of CCA treated Corsican pine using serial exposure and unsterile soil techniques. After 3 serial exposures to Coniophora puteana FPRL 11E and Coriolus versicolor FPRL 28A the treated wood performed in the order Bethel > Steam/Bethel > Lowry and Lowry > Bethel > Steam/Bethel respectively. Weight losses in the order of 40% and 30% were generated by Coniophora puteana and Coriolus versicolor at retentions of 3.9 kg/m³ and 1.0 kg/m³ CCA respectively. After 12 and 26 weeks unsterile soil burial the order was Lowry > Bethel > Steam/Bethel with weight losses of up to 30% at 1.0 kg/m³ CCA. The data are considered in relation to the decay mechanisms of the various biological agents used.
P R Newman, R J Murphy
Decay Resistance of Maple (Acer Insigne) Wood Against White Rot
2010 - IRG/WP 10-10740
In this study, the decay resistance of maple (Acer insigne) in natural state and treated with ACC (Acid copper chromate) was investigated against the white rot fungus (Coriolus versicolor). ACC is a kind of water borne preservatives that was used in this study for treating specimens under vacuum and pressure (Bethell procedure) with 3 percent concentration. In conducting mentioned evaluation, kolleschale’s method according to DIN 52176 and B.S. 838: 1961 were used in completely randomized block design. Specimens were contaminated with cultured fungus for fourteen weeks in condition (22, 75% relative humidity). After this period, weight reduction, compressive strength (parallel to grain) and hardness of specimens were tested. Under test conditions weight reduction of control sample were much higher than treated ones. Compressive strength (parallel to grain) and hardness of treated samples were higher than control ones.
V Tazakor Rezaei
Proposed method for out-of-ground contact trials of exterior joinery protection systems
1981 - IRG/WP 2157
Methods for testing the efficacy of preservative treatments for exterior joinery are described using the format of a European Standard. Commercially used treatments applied to jointed test units (L-joints) which are then protected by conventional finishes are exposed to normal outdoor hazards out of ground contact. Assessment is made a) by determining eventual failure through decay and b) by destructive examination of replicate treated and untreated units, after increasing time intervals, rating comparative performance in terms of wood permeability increase and the progress of microbial colonisation.
J K Carey, D F Purslow, J G Savory
JWPA method for testing effectiveness of surface coatings with preservatives against decay fungi
1981 - IRG/WP 2164
In 1979 JWPA established a new method for testing effectiveness of surface coatings in accordance with practical use of preservative-treated lumber. Comparing the new testing method with JIS A 9302, a few new trials - size of wood specimen, weathering procedure, and decay-test procedure - are incorporated.
A suggested method to test the toxicity of wood preservatives towards the house longhorn beetle
1977 - IRG/WP 275
This method was developed in the Institute for Wood Technology in Sarajevo, Yugoslavia and is used to get quick information on the toxicity of wood preservatives against house longhorn beetle (Hylotrupes bajulus). The method can be used for superficially treated or deeply impregnated wood blocks, and by using small or normal size test material it can be used as a laboratory or field test, and also for accelerated infestation of test material out of ground contact. The paper is given to the International Research Group on Wood Preservation as a suggested method which could possibly be used as a standard. Only the laboratory test method is described.
An evaluation method for less termite attack execution on thermal insulation for fundation walls
2002 - IRG/WP 02-20245
According to the results by the real scale Japanese building tests, the termite installation was observed at very little spaces between foundation and insulation. The termite penetration spaces between foundation and insulation on foundation systems in Japanese wooden houses were checked by the way of streaming speed of colored water. Because of difficulty for its execution, the parts of outside angles and reentrant angles in continuous foundation were more sensitive for the termite penetration. Special accessories of thermal insulation for these angles can be effective for lesser termite installation.
K Suzuki, Y Tanaka
A practical method to evaluate the dimensional stability of wood and wood products
1990 - IRG/WP 2342
This paper presents a new simple method to evaluate wood and wood products for their resistance to swelling and to assess wood preservatives for their ability to dimensionally stabilize treated wood exposed to water. Permeable wood of various dimensions and treated with different preserving chemicals have been measured for swelling in the radial and tangential direction during immersion in liquid water. The results indicate that a simple exponential function describing the dimension of the samples during immersion can be used to evaluate both the water-repellency and anti-swelling effectiveness of wood preserving chemicals. The results can be achieved in reasonable time, and the parameters of the function can be determined by a commercial desk-top computer program.
J P Hösli
Testing of wood preservatives against marine borers (Part 1). Method of testing wood preservatives against marine borers (Part 2)
1971 - IRG/WP 37
P C Trussell, C C Walden
The use of pressure cycling to improve heartwood penetration in Pinus radiata (D. Don)
1995 - IRG/WP 95-40050
This study investigates the effect of cycling pressure on the treatability of radiata pine heartwood. The results indicate that liquid penetration into the heartwood is affected by the preconditioning method used and pressure treatment time. There is no significant improvement in the penetration of Pinus radiata (D. Don) heartwood when a cycling or pulsation process is used.
P R S Cobham, P Vinden
Collaborative soft rot tests: PRL tests of Cu/Cr/As preservative using method of Document No: IRG/WP/208
1973 - IRG/WP 223
These tests were undertaken as a preliminary to the next series of collaborative soft rot tests. An interim report has already been presented at Berlin in 1972 as Document No: IRG/WP/211
J K Carey, J G Savory
Comparison of the agar-block and soil-block methods used for evaluation of fungitoxic value of QAC and CCA wood preservatives
1994 - IRG/WP 94-20039
The modyfied agar-block and soil-block methods were used for comparing the fungitoxic value of QAC and CCA type preservatives against Coniophora puteana and Coniophora olivacea The mass loss and moisture contents of wood were analysed.
J Wazny, L J Cookson
The proposal for the method of testing the phytotoxic effect of wood preservatives
2000 - IRG/WP 00-50163
Four methods of testing the phytotoxic effect of wood preservatives are proposed as the unified test by: - direct application of the preservatives to the test plants by spraying; - direct application of the preservative to the soil substrate; - indication plants growing in the vicinity of treated wood; - seed germination rate on the treated substrate.
J Wazny, P Witomski
CEN Draft (38 N 460E) Standard: Test method for determining the protective effectiveness of a preservative in the marine environment
1986 - IRG/WP 4132
This European Standard describes a marine test method which provides a basis for asseasing the effectiveness of a wood preservative used to prevent attack of timber in sea-water by marine borers. The method is only suitable for testing preservatives which are intended to prevent attack by marine wood boring organisms of treated timber for use in more or less permanent contact with sea-water. It is not suitable for assessing the effectiveness of preservatives against micro-organisms. The main objective of the method described is to evaluate the relative effectiveness of a wood preservative applied by vacuum/pressure impregnation. For this reason permeable timbers are used throughout so that the protective efficacy of various retentions of the preservative can be determined. However, it is recognized that modifications of the method may be used for other purposes, e.g. to determine the relative efficacy of a preservative treatment or to determine the natural durability of the heartwood and sapwood of a selected timber species. The method is primarily intended for testing in temperate waters where Teredine and Limnoria borers dominate. However, it is also capable of being used in tropics where attack by Pholads and specific Crustacean borers may be very destructive. It has to be considered that the test has to be run for a minimum period (usually for 5 years or until the point of failure) before any interpretation of the results can be made. Variations in the test conditions can be expected from one test site to another depending on temperature, salinity, population density of the various borer species etc. This will inevitably influence the general rate of attack. However, by comparing the results obtained for samples treated with the test product with those obtained with a reference preservative and those obtained with untreated control samples, the relative protective effectiveness of the product tested can be evaluated.
Proposed standard laboratory method for testing fungicides for controlling sapstain and mould on unseasoned lumber
1977 - IRG/WP 292
This laboratory method is for determining the effective concentration, or concentration for zero growth (CGo), for fungicides or preparations of fungicides which are potentially useful in protecting packaged or unseasoned lumber in storage and shipment from biodeterioration by sapstain fungi and moulds. The test is rapid and may be completed in three weeks and gives a good indication of the toxicity of a chemical against sapstain fungi and moulds.
A J Cserjesi
Determination of the preventive efficacy against wood destroying basidiomycetes fungi, EN V 839 - CEN/TC 38 WG 9
1993 - IRG/WP 93-20015
The WG 9 of CEN TC/38 has presented to EC a mycological test to assess efficacy of preservatives applied by surface process. This method is now an experimental standard (EN V 839) which has to be approved by the different european delegations. The following paper is not the standard as it has been proposed but is a presentation of the principle of the method. The experimental standard specifies a laboratory method of test which gives a basis of the assessment of the preventive action of a wood preservative when applied as a surface treatment against Basidiomycetes fungi. This method is applicable to formulations of preservatives in a ready to use form (organic formulations, organic water-dispersible formulations, water-soluble materials). Series of susceptible wood species specimens are treated on longitudinal faces whith the preservative in test using brushing as surface procedure. Test specimens are then exposed by an intermediate mesh to feeder blocks infestedby pure culture of Basidiomycetes fungi in sterile conditions and penetration of fungi is assessed on cross section sawn in the samples at the end of the test.
A direct method for testing plywood and particle boards against fungal decay
1984 - IRG/WP 2214
A method directly inspired from the French standard testing method of the resistance of particle boards against fungal decay (AFNOR N° 51.295 May 1980) is described. But in that experimentation, the infestation is localized and realized in non sterile conditions. Small blocks of Fagus sylvatica (60 x 20 x 10 mm³) used as " inoculates " are infested with basidiomycetes, in Kolle flask for 4 to 6 weeks, then tightly pressed against the middle part of the test specimens (190 x 15 x 15 mm³). The lower part of the inoculates is plunged in vermiculite kept constantly humid by water containing a selective fungicide. After twelve weeks of exposure in non sterile conditions, in a green house with constant temperature around 20°C, the test specimens are then submitted to a static bending test until fracture. The comparison of the fracture-stress between control test specimens and the specimens exposed to wood rotting basidiomycetes permits to evaluate the resistance of the studied materials against fungal decay.
L N Trong
A method of isolating actinomycetes from decayed wood
1974 - IRG/WP 126
This paper deals with a tentative method of isolating Actinomycetes from dacayed wood.
A novel method for delivering fluids into bolted wooden components.
2004 - IRG/WP 04-40280
The paper describes the development of a washer that enables fluids such as wood preservatives and adhesive resins to be delivered to bolted wooden components in-situ. The system was developed to meet the criteria of low cost and the ability to tolerate inaccurate drilling of holes in the wooden members.
G S Sawyer, B Tole
Treatment of fresh green round bamboos culms (Dendrocalamus strictus) by sap-displacement (wick) method
2005 - IRG/WP 05-40311
Sap displacement method has great potential for treating short length bamboos as it does not require any technical equipment. The process is simple and large nos. of bamboos can be simultaneously treated in relatively short period. There is no wastage of chemicals as the remnant solution reused. Bottom ends and middle portion had better treatment in compared to lop end portion. With increasing length of the flow of preservatives is impaired. The method culms can conveniently 3m length.
R Lal, C N Vani
Water-based wood preservatives for curative treatement of insect-infested spruce constructions
1998 - IRG/WP 98-30171
On laying down sanitation measures for wooden constructions infested by wood boring insects, we must take into account static risks for the construction - and, thus, for the security of the user - as well as risks for humans and environment due to the chemical preservative compounds of the treated wood. Analyses on many roof constructions made with spruce (Picea abies L.) have revealed that Hylotrupes bajulus L. and Anobium punctatum De Geer have not the significance given to them for decennies. That often allows to replace solvant-based with water-based wood preservatives in old buildings, for the protection of humans and environment. Therefore, a method has been developed in Switzerland for testing wood preservatives with delayed curative efficacy against the house longhorn beetle. Like the European Anobium Standard EN 370 this method intends to prevent the emergence of Hylotrupes beetles. Laboratory tests with diverse water-based wood preservatives available on the market in Switzerland have shown that particularly boron and benzoylphenylurea derivatives containing products get a sufficient penetration in the wood and prevent the emergence of the beetles.
E Graf, P Manser, B Lanz
Short-term field test method with accelerated infection of Basidiomycetes in wood
1981 - IRG/WP 2155
In the ŠIPAD - IRC Wood Protection Laboratory an attempt has been made to develop a simple short-term method for field testing out-of-ground contact wood using accelerated infections with Basidiomycetes. This method makes it possible to obtain a preliminary assessment of a preservative's quality and to estimate the possibility of achieving promising results in more expensive long-term tests. The idea was to use water traps (reservoirs) and 50 x 25 x 15 mm³ laboratory infected pine blocks as the substrate to improve the possibility of inoculation of L-joints.
Preservative treatment of Eucalyptus saligna fence posts by the double-diffusion method
1982 - IRG/WP 3196
Eucalyptus saligna fence posts treated by the double-diffusion method with two chemical combinations showed average lives of 11.2 years (copper sulphate and potassium dichromate at 10.5 kg/m³ retention)and of 14.3 years (copper sulphate and sodium mono-H arsenate at 7.1 kg/m³ retention), as determined in five test sites in the State of Sao Paulo, Brazil. The exponential model was the best fit when expressing average life by the Decay Index (DI) as a function of time.
E S Lepage, A R De Freitas