IRG Documents Database and Compendium

Search and Download IRG Documents:

Between and , sort by

Displaying your search results

Your search resulted in 592 documents. Displaying 25 entries per page.

Délavabilité de bois ronds traités avec un sel CCA dans des conditions réelles de stockage. Incidence pratique de la fixation accélérée par étuvage. Impact effectif sur l'environnement
1993 - IRG/WP 93-50001-23
Un essai de terrain a été organisé pour mesurer concrètement, dans des conditions aussi proches que possibles des conditions réelles de terrain, les pertes effectives en produit de traitement lorsque le bois traité est soumis à des intempéries. L'essai a été conduit sur des bois ronds (poteaux), traités en autoclave par procédé Bethell avec un sel CCA de type C, avec comme finalité l'évaluation de la nature et des quantités de composés délavés en pratique, pour évaluer ainsi leur impact réel sur l'environnement au niveau du site de traitement. Compte-tenu des propriétés fixantes de ce type de produit, il était interessant d'identifier ces pertes à différents stades de la fixation, ainsi qu'après fixation compléte. Utilisant également les divers travaux et constats disponibles à ce jour sur les possibilités d'accélérer la fixation par l'étuvage, nous avons voulu observer et quantifier cette amélioration dans les mêmes conditions de terrain. Cet essai a été organisé et exécuté conjointement par le CTBA et la société FRANE BOIS IMPREGNES. Il conduit à 3 constatations principales: - Les pertes pratiques sont quantitativement nettement moins importantes que celles obtenues à partir des méthodes et échantillons de bois utilisés en laboratoire. - A l'issue et surtout au cours de la fixation les divers métaux se comportent de façon très différente, et on peut penser que la nature de la formulation a une importance notable sur ce comportement, même si dans tous les cas les quantités concrètement délavées restent faibles. - L'éuvage en sortie de traitement et dans des conditions adaptées permet d'obtenir spontanément, un résultat analogue à celui obtenu par un cycle de fixation traditionnel.
M Rayzal, F Larroze

Accelerated anti-termite laboratory tests, simulation of field conditions and assessment of results for service life
1994 - IRG/WP 94-20034
Termites are one of the most serious biodegrading agents in the tropics. Though some species of termites occur in the warmer temperate regions, only a few species can withstand the rigours of colder regions. Testing of termite resistance of material is done either by field tests or by accelerated laboratory tests. Field tests, though realistic to assess service life, are elaborate, take a long time and are meant only against subterranean termites. The field tests also represent the collective and commulative effects of all kinds of abiotic and biotic degrading factors. Thus, results of field tests does not necessarily represent only termite resistance, as other biodegrading agents also operate in the field. In contrast, laboratory tests need short duration (10 days to a few months), are not elaborate, represent primarily termite resistance, are easily repeatable, tests are done under standardised conditions which permit formulating national and international standards. The last but not the least, the results can be presented in quantitative terms. However, laboratory tests are often handicapped due to lack of adequate technology to culture all species of termites that destroy material in the field and some of the biotic and abiotic factors are difficult to simulate under laboratory condition with unquestionable fidetily without which service life of a material can hardly be predicted accurately. Further, precise knowledge of social and biological behaviour of tests termite species toward the test material is an important factor in the laboratory culturing and testing. The test termites should also possess certain attributes like tolerance to fluctuations of temperatures and relative humidities, lower toxicities and short duration starvation. Laboratory tests need similar and uniform tests conditions to obtain comparable and repeatable test results. The paper deals with a review of various laboratory test methods in vogue in different countries and delineates simulation of field conditions and discussion on assessment and interpretation of results to predict service life.
P K Sen-Sarma

Field Liners as physical barriers to prevent wooden utility pole decay in soil: An accelerated field simulation trial
2008 - IRG/WP 08-20384
Field Liners (FL’s), plastic sleeves used to protect in-ground wooden poles from fungal and termite damage, have been tested before as physical barriers to prevent contact between soil and wood and to retain wood preservative treatment. These earlier studies concentrated mostly on creosote preserved poles and early generation FL’s which were cumbersome in their application. The newer generation Field Liners were designed for simpler installation. Renewed interest in their application has emerged in Australia in light of dwindling supplies of suitable timber to use as utility poles. In light of this, and previous ‘hurdle theory’ publications, some Australian utility distribution companies commissioned a study to determine whether these new generation FL’s would work under Australian conditions. An accelerated field simulation trial using posts (with and without Field Liners and/or H1 retentions of ACQ preservative treatment) in fungus-rich soil was conducted in a purpose-designed facility maintained at constant high temperature and humidity. Posts were examined periodically for decay over 19 months. Decay was first noticed at the six month inspection, when a treated Eucalyptus cladocalyx and an untreated Eucalyptus globulus control (without Field Liners) had decayed slightly. No E. cladocalyx or E. globulus posts with FL’s had any decay. After 19 months, all eight untreated control posts had significant soft rot throughout their sapwood. All eight ACQ-treated posts without FL’s had 1-8 mm decay through their sapwood. All four ACQ-treated posts with FL’s had no evidence of decay while two of the four unpreserved posts with Field Liners had slight decay adjacent to the small hole/vent at the bottom of the FL’s where post-soil contact occurred. It is not recommended that FL’s be used as sole protection for untreated poles. Reduced preservative retentions in poles with FL’s may be considered in order to reduce the amount of preservative used, or poles which have lower natural durability in the heartwood could also be considered.
A R Howgrave-Graham, L J Cookson, T Hale

Progress report on co-operative research project on L-joint testing
1983 - IRG/WP 2192
A F Bravery, D J Dickinson, M Fougerousse

A comparison of soft rot, white rot and brown rot in CCA, CCP, CCF, CCB, TCMTB and benzalkonium chloride treated Pinus radiata IUFRO stakes, after 9-15 years exposure at five test sites in New Zealand
1991 - IRG/WP 1485
The aim of this study was to determine if decay type varies significantly between five field trial test sites of different soil type, aspect and climate in 9-15 year old, replicate CCA, CCF, CCP. CCB, TCMTB and AAC treated IUFRO stakes. A visual on-site assessment of decay type on every test stake was made and observations confirmed by microscopical examination. Regression analyses were used to determine significant differences of percentage frequency of occurrence of each rot type between sites and preservatives. Large differences in percentage frequency of occurrence of rot type were evident between sites. One site was dominated by brown rot (85%) and two were dominated by soft rot (99 and 91%). The fourth site had intermediate proportions of brown rot (40%) and soft rot (71%) but had the second highest occurrence of white rot (32%) (highest = 37%; lowest = 11%). The fifth site was distinct in that a large proportion of stakes (69%) had both well established brown rot and soft rot. Stakes at the other four sites tended to have only one rot type. Some highly significant preservative effects were also found. Possible causes of these differences are discussed in terms of inter-site soil type, climate and other differences.
R N Wakeling

Field trial with poles of Scots pine treated with six different creosotes
1996 - IRG/WP 96-30115
In the middle of the 50's field trials with creosote-treated poles were started in France, Germany and Sweden. The trials were initiated by WEI (Western-European Institute for Wood Preservation). Six different creosotes were used and 40 poles per creosote were installed at each test field. Results after 39 years of exposure in Simlangsdalen, Sweden are reported. Poles treated with a heavy creosote were less decayed than poles treated with medium-heavy creosotes. Poles treated with a light creosote were most decayed.
Ö Bergman

Wood preservatives: Field tests out of ground contact. Brief survey of principles and methodology
1976 - IRG/WP 269
This paper contains the following spots: 1.: The general need for field tests. 2.: Interests and limits of field tests in ground contact. 3.: Various methods in use for out-of-ground contact field tests. 4.: Fungal cellar tests are they an alternative to above-ground decay exposure tests? 5.: Conclusions.
M Fougerousse

Field test evaluation of preservatives and treatment methods for fence posts
1985 - IRG/WP 3347
This work presents the field test results after fifteen years exposure of Eucalyptus saligna fence posts treated with six different preservatives and five treatment methods. All the combinations with oil-borne preservatives presented the best results and among the waterborne preservatives, the fence posts treated by immersion method were with the lowest performance in the field test.
G A C Lopez, E S Lepage

Field performance of wood preservative systems in secondary timber species
1997 - IRG/WP 97-30152
The objective of this ongoing study is to evaluate the performance of new, potential, and standard wood preservative systems in secondary North American timber species. Eleven preservative systems were evaluated in this study - ACQ Type B, Copper Citrate 2: l, CDDC, chlorothalonil/chlorpyrifos, copper-8-quinolinolate, tebuconazole/chlorpyrifos, RH287, propiconazole/chlorpyrifos, copper naphthenate, CCA. and creosote. Field evaluations are being performed with ground contact field stakes and termite-specific testing in Hawaii, along with laboratory soil bed tests. The major wood species used with all the systems and evaluation methodologies are loblolly pine, northern red oak, tulip poplar, and cottonwood. More limited evaluations (field stakes only) are being conducted with eastern hemlock, red maple, and sweetgum. Information is presented from laboratory soil bed, field termite, and field stake evaluations. There is good correspondence between soil bed and field stake results. The more highly developed preservative systems and those in an AWPA P9 Type A oil carrier tend to perform better, and there can be a strong affect on performance from the wood species.
P E Laks, K W Gutting, R C De Groot

A rapid field bioassay technique with subterranean termites
1983 - IRG/WP 1188
Details are summarised of a field procedure which is designed to ensure continuous exposure to a replenishing termite biomass. After pre-baiting to determine the presence and identification of a termite hazard, test specimens (35 x 35 x 250 mm³) are installed vertically in the ground adjacent to and in contact with bait specimens of the same dimensions and interconnected by susceptible feeder strip.
C D Howick, J W Creffield

Performance of treated fence posts after 6 years in five test plots in the State of Sao Paulo - Brazil
1976 - IRG/WP 376
Fence posts treated with creosote, pentachlorophenol and creosote/ pentachlorophenol mixtures showed good performance after 6 years of exposure in five test plots located in the State of Sao Paulo - Brazil. Good results were also achieved with copper sulphate/sodium arsenate and copper sulphate/potassium dichromate mixtures. Fungi and termites were the main destroying agents found attacking the posts.
M S Cavalcante

Evaluation of new creosote formulations after extended exposures in fungal cellar tests and field plot tests
2000 - IRG/WP 00-30228
Although creosote, or coal tar creosote, has been the choice of preservative treatment for the railroad industry since the 1920s, exuding or "bleeding" on the surface of creosote-treated products has been one incentive for further enhancements in creosote production and utility (Crawford et al., 2000). To minimize this exuding problem, laboratories such as Koppers Industries Inc., USA, and Commonwealth Scientific and Industrial Research Organization (CSIRO), Division of Chemical and Wood Technology, Melbourne, Australia, have developed changes in processing of coal tar that produce distillates with fewer contaminants. This "clean distillate" is then used to formulate "clean creosote" as a preservative. These new, unique creosote formulations are being investigated as part of a program to enhance the use of regionally important wood species in the United States. Four retention levels of each of two new creosote formulations creosote, one pigment-emulsified creosote (PEC) and one creosote formulation that meets the AWPA Standard C2-95 for P1/P13 creosote (AWPA, 1995a), were applied to two softwood species and two hardwood species. Two laboratory procedures, the soil-block and fungal cellar tests (accelerated field simulator), were used to evaluate the four creosote formulations. These procedures characterized the effectiveness of the wood preservatives. The soil-block tests were used to determine the minimum threshold level of the preservative necessary to inhibit decay by pure cultures of decay fungi. In general, the soil block tests showed there was little difference in the ability of the four creosote formulations to prevent decay at the three highest retention levels as summarized in a previous report by Crawford and DeGroot (1996). The soil-block tests will not be discussed in this report. Fungal cellar tests expose treated wood to mixtures of soil-borne fungi that promote accelerated attack. Crawford and DeGroot (1996) discussed the evaluation of the creosote formulations after 17 months of exposure in the USDA Forest Service, Forest Products Laboratory (FPL), fungal cellar. At that point in time data from the fungal cellar tests showed that softwoods are protected better than hardwoods for all four formulations of creosote tested. This report will discuss exposure of the fungal cellar stakes upto 36 months. In addition, field stake tests are being used to verify service life of the new creosote formulations in vivo. Results from accelerated tests are indicative of field performance, but the correlation between laboratory and field results is still being investigated. Field stake tests are regarded as critical, long-term evaluations that provide results most directly related to the performance of treated products in service. In this study, we report on the performance of the creosote formulations after five years of exposure in field tests.
D M Crawford, P K Lebow, R C De Groot

Results of chemical analyses in the field of wood preservation in the Bundesanstalt für Materialprüfung
1973 - IRG/WP 321
The results of qualitative and quantitative chemical analyses of wood preservatives are often the basis for evaluating the various works in the field of wood preservation. In the past 10 to 15 years a number of such works was carried out in the Bundesanstalt fur Materialprüfung, Berlin-Dahlem, dealing with the identification and effectiveness of wood preservatives and with methods of wood preservation. Fundamental realisations were made which will be summarised below. It seems advisable to differentiate between inorganic and organic chemical wood preservatives and methods of analyses. These are two distinct fields which differ also with regard to the analytical techniques applied.
H J Petrowitz

Synergistic effect of boron on Streptomyces rimosus metabolites in preventing conidial germination of sapstain and mold fungi
1992 - IRG/WP 92-1565
We evaluated the synergistic effect of boron (4% BAE solution of Tim-Bor or 4% boric acid) on Streptomyces rimosus metabolites in preventing spore germination of sapstain and mold fungi using plate bioassay, Southern yellow pine and sweetgum block tests, and green pine log sections: sapstain -- Ceratocystis coerulescens, Ceratocystis minor, and Aureobasidum pullulans; mold fungi -- Aspergillus niger, Penicillium spp, and Trichoderma spp. Inhibition of spore germination in plate bioassay by metabolites with boron was more effective than without added boron. Treatment of wood samples with the mixture of boron and unconcentrated metabolites also resulted in the synergistic effect and completely inhibited spore germination of sapstain and mold fungi.
S C Croan, T L Highley

Japan's comments on ISO/DIS 12583-1/2
1996 - IRG/WP 96-20100
The paper describes an accelerated field test for the evaluation of timber preservative formulations against subterranean termites. The method has been adopted by the South African wood preservation industry as a screening method for the approval of wood preservatives for use under SA conditions. The method which is based upon the fungal cellar test offers a rapid means of evaluating the comparative performance of new wood preservative formulations in an environment that accurately reflects field conditions.
P Turner, D Conradie

Performance of preservative-treated hardwoods with particular reference to soft rot. Report of condition of specimens installed in Victoria, Australia
1980 - IRG/WP 3155
J Beesley, R McCarthy

Modélisation sur maquette du rejet accidentel d'un gaz toxique et inflammable dans l'atmosphere - Emission de type "bouffée d'oxyde d'éthyléne [Water model simulation of toxic and flammable gases in the environment on industrial sites - Puff of ethylen oxide]
1990 - IRG/WP 3576
M Milhe

Field trials of groundline remedial treatments on soft rot attacked CCA treated Eucalyptus poles
1983 - IRG/WP 3222
A total of 17 CCA treated Eucalyptus poles, which were found to contain 2-5 mm of soft rot in October, 1980, were reinspected in October, 1982. In 1980, 11 of the poles were given a supplemental groundline bandage treatment of either Osmoplastic or Patox, while 6 of the poles were designated as untreated controls. Two years after remedial treatment, samples were removed from the poles for microscopic observations and for chemical retention analysis. It was found that the remedial bandage treatments were effective in preventing any further advance of soft rot. Based on the positive results of this study, a treatment efficacy of five years or longer is predicted.
W S McNamara, R J Ziobro, J F Triana

Inspection results of preservative treated stakes, maximum 33 years in field
1992 - IRG/WP 92-3690
Since in 1958, we have undertaken field experiments in Japan. For these field experiments, we used sapwoods of Japanese cedar called Sugi (Cryptomeria japonica) because of majority of plantation forest soft wood species in Japan. For some preservatives, we added sapwood of Japanese beech called Buna (Fagus crenata), a main Japanese hard wood species. Dimensions of these specimens were 30 x 30 x 600 mm³ (T x R x L). About 30 preservatives mainly water born but 20% of oil born preservatives included, were examined for this test. We checked the damage rating every year by the observation. The service life of the preservative treated stakes were estimated at the period when the average damage rating of stakes were reached beyond 2.5 . Creosote oil, creosote oil mixed heavy oil (75:25 and 50:50) and creosote oil mixed coal tar (75:25 and 50:50) are still sound conditions for 33 years. CCA (JIS K 1554 Type 1) 2% and Tancas C 2% are still sound conditions for 28 years. Because of soft rot, the treated Buna specimens were shorten as ones of treated Sugi.
K Suzuki, K Yamamoto, M Inoue, S Matsuoka

Wood furfurylation process and properties of furfurylated wood
2004 - IRG/WP 04-40289
The first processes for “furfurylation” of wood (wood modification with furfuryl alcohol) were developed several decades ago. Furfuryl alcohol is a renewable chemical since it is derived from furfural, which is produced from hydrolysed biomass waste. Over the last decade modernised processes for furfurylation of wood have been developed. These new processes are based on new catalytic systems and process additives. Two main processes for production of furfurylated wood have been developed for WPT (Wood Polymer Technology ASA) by the authors – Kebony 100 for high modification levels of hardwoods and VisorWood for lower modification levels of pine. Commercial production according to the Kebony process has been running since August 2000, mainly for flooring. A small Kebony production plant is now in operation in Lithuania. A larger Kebony/VisorWood production plant started up in September 2003 in Porsgrunn, Norway. Several new plants operating according to the VisorWood process, each with an annual capacity of 10 000 m³ or more, are under construction. The properties of furfurylated wood depend on the retention of grafted/polymerised furfuryl alcohol (PFA) in the wood. At high modification levels (high retention of PFA) the enhancement of a wide variety of properties are achieved: an exceptional hardness increase, exceptional resistance to microbial decay and insect attack, high resistance to chemical degradation, increase in MOR & MOE, and high dimensional stability. At lower modification levels many property enhancements also occur, however to slightly lower extent. Notable are resistance to microbial decay and insect attack, increase in MOR & MOE, and relatively high dimensional stability.
M Westin, S Lande, M Schneider

Durability of pine modified by 9 different methods
2004 - IRG/WP 04-40288
The decay resistance was studied for pine modified by nine methods of wood modification: 1) Acetylation, 2) Treatment with methylated melamine resin (MMF), 3) Acetylation followed by post-treatment with MMF-resin, 4) Thermal modification, 5) Furfurylation, 6) Maleoylation (using water solution of MG or ethanol solution of maleic anhydride), 7) Succinylation, 8) NMA-modification and 9) modification with reactive linseed oil derivative (UZA), Wood blocks of Scots pine (Pinus sylvestris L.) sapwood were modified in pilot plants. Methods 1-5 were performed by the authors at Chalmers University of Technology or at BFH in Hamburg. Methods 5-9 were part of a European research project (the Chemowood project, FAIR-CT97-3187) and therefore each of these modifications was performed by the project participant responsible for the method. For laboratory testing in TMCs (modified European standard ENV 807) and pure basidiomycete culture bioassays, smaller test specimens were cut from the modified wood blocks. Most of the modification methods were applied on test specimens for marine field testing (EN 275) and some methods to produce mini-stakes for field tests in five Swedish fields. Some modification methods result in modified wood with poor durability, whereas other methods (acetylation, furfurylation and MMF-treatment) seem to provide excellent resistance to microbial decay.
M Westin, A O Rapp, T Nilsson

The accelerated field simulator (= fungal cellar)
1982 - IRG/WP 2170
G C Johnson, J D Thornton, H Greaves

Protocol for evaluation and approving new wood preservative
1985 - IRG/WP 2159
M E Hedley, J A Butcher

Trials on the field control of the Formosan subterranean termite with Amdro® bait
1982 - IRG/WP 1163
Amdro® - treated paper towels were introduced into two field colonies of the Formosan subterranean termite in Hawaii. At the concentration of 180 ppm, the toxicant bait was ineffective one month after the introduction. At higher concentrations (> 6,400 ppm), the baits were eaten initially; however, one week after introduction, termites avoided or covered the baits. The 15,000 ppm baits supressed the activity of one colony but did not affect the other.
N-Y Su, M Tamashiro, J R Yates III

Coding scheme for samples for IRG world-wide co-operative field experiment
1975 - IRG/WP 360
Each sample has been given a number containing six digits (eg 16 23 05). The first 2 digits indicate the country and person supplying the timber, the second 2 digits indicate the species of timber, and the last two digits indicate the treating concentration. All samples which end with the numbers 26 to 50 are to be placed in one site in the United Kingdom, probably at the Imperial College site at Silwood. All the other samples will be returned to the persons in the following list according to the code number indicated.
R Cockcroft

Next Page