IRG Documents Database and Compendium


Search and Download IRG Documents:



Between and , sort by


Displaying your search results

Your search resulted in 97 documents. Displaying 25 entries per page.


Creosote movement from treated wood immersed in fresh water: Initial PAH migration
2003 - IRG/WP 03-50201
Creosote has a long history of successful use as a wood preservative, but polycyclic aromatic hydrocarbons (PAHs) in this preservative have raised environmental concerns, particularly when creosote-treated wood is used in aquatic environments. A number of models have been developed to predict the risk of creosote use in aquatic environments, but one limitation of these models is a lack of data on the initial rates of creosote migration from treated wood. We examined the effect of flow rates on creosote migration from freshly treated wood immersed in fresh water. Creosote component levels declined to a steady state within 7 days, suggesting that creosote migration decreased sharply after an initial spike. The data will be used to enhance existing predictive models.
Sung-Mo Kang, J J Morrell, J Simonsen, S T Lebow


Efficiency of wood impregnation processes
1980 - IRG/WP 3151
Many wood impregnation processes have been in use for a very long time, up to 150 years, but they have not been progressively modified. This paper considers impregnation processes in relation to current requirements, particularly impregnation efficiency and energy consumption. The term 'pore' is used throughout in its physical sense and is not confined to botanical 'pores'. SI units are used and, for convenience, atmospheric pressure is assumed to be exactly 100 N/m²; complete vacuum is 0 N/m². These observations and conclusions summarise an extensive programme of investigation at Penarth Research Centre involving creosote and water-borne preservatives, as well as a range of organic solvent preservatives.
B A Richardson


Aspects of diffusion of boron through wood
1984 - IRG/WP 3298
Boron compounds have been shown to be toxic to a wide range of wood destroying insects and fungi. They are cheap, have low mammalian toxicity and their application in the treatment of wood does not demand specialized equipment. These attributes make them specially attractive to developing countries. Currently, however, little is known about the mechanism of diffusion of boron through wood. Effective treatment with boron preservatives requires good understanding of how the preservatives diffuse through wood. This paper presents a research proposal with the overall objective of determining the relative importance of structural wood components in determining diffusion rates.
S Iddi


Comparison of cubic and plug samples for preparation and data assembly in permeability study
2000 - IRG/WP 00-20197
In order to determine if plug experimental samples (PES: 30 x 15 mm2 diameter) could be used for inspection of wood permeability characteristics, radial and longitudinal flow directions were prepared according to either PES or cubic experimental samples (CES: 100 x 20 x 20 mm3) from the sapwood zone of Sitka spruce and treated by tanalith-C according to full-cell process. Results from the two preparation techniques agreed in the test to determine the mean percentage of void volume filled by liquid both radially and longitudinally, while the preparation process (i.e. machining, sealing, etc.) of the experimental samples and the period of the data collection was quite longer in CES than that for PES in either flow direction.
I Usta


New technique to analyze impregnation processes
1988 - IRG/WP 2304
Equipment has been developed to measure liquid flow in wood during impregnation processes. Basic principles of flow measurements using directly heated negative temperature coefficient thermistors, and some characteristics of the hardware developed are presented in this paper.
J P Hösli


A review of the configuration of bordered pits to stimulate the fluid flow
2005 - IRG/WP 05-40315
As the bordered pits have generally been thought to have an influence on the refractory nature of softwoods, structural behaviour of this conducting pathways is discussed according to the published literature. Various theories on the role of bordered pits to axial flow are expounded in respect to preservative treatment. Pit aspiration is also reviewed.
I Usta


Direct measurement of fluid flow within wood
1986 - IRG/WP 2248
The problematics of fluid flow mechanism within wood using a permeability concept are highlighted, and the non-feasibility of a practical and versatile model is explained. An alternative method using a negative temperature coefficient thermistor to measure flow velocity directly is presented. The method has been verified in living trees and shows extreme sensitivity for flow above 1 meter/hour. For measuring lower velocities, the method needs improvement.
J P Hösli


Temperature influence on the growing velocity and cellulolytic activities of Poria placenta strains from several locations
1986 - IRG/WP 2263
The differences observed on the FPRL 280 Poria Placenta strain at several Research European Laboratories for determining up the fungicide effectiveness of wood preservative has carry us to do a comparative study about the cellulolytic activity and growth velocity of each of this strains at different temperatures (22, 24 and 28°C). The results show significative differences when the temperature is changed.
A M Navarrete, M T De Troya


Monographic card on Antrodia serialis
1984 - IRG/WP 1145
G Seehan


The effect of sapwood on the rate of deterioration of fence posts
1986 - IRG/WP 1277
In order to evaluate the effect of the presence of sapwood on the rate of deterioration of fence posts, 30 specimens with and without sapwood of Eucalyptus citriodora, Eucalyptus paniculata, Eucalyptus saligna and Eucalyptus tereticornis were exposed in three test sites in the State of São Paulo, Brazil. The results of the inspection carried out in 1985, after 5 years of exposure, are reported in the present paper.
M S Cavalcante, G A C Lopez, E S F Mucci, R G Montagna


Report on the monographic card on Coriolus versicolor
1972 - IRG/WP 111
C Jacquiot


Report on the status of collaborative experiments within the Sub-group on Basidiomycete tests
1983 - IRG/WP 2194
This report summarises the results of co-operative work carried out within the Sub-Group on Basidiomycete tests up to December 1982. The principle findings are recorded in the Conclusions Section. Work intended between IRG-13 in Turkey and IRG-14 in Australia is cited under Future Programme. An Annex provides a response sheet for existing and new participants to notify their contributions.
A F Bravery


The effect of didecyldimethylammonium chloride on growth of different strains of mould fungus Gliocladium roseum
1995 - IRG/WP 95-10105
The tolerance and degrading ability of different strains of Gliocladium roseum towards didecyldimethylammonium chloride (DDAC) were studied. All four of the strains of Gliocladium roseum were tolerant to DDAC and after their growth on amended malt agar, the retention of DDAC in the medium was reduced.
Yu Zheng, J N R Ruddick


Analysing the characteristic role of moisture content for drying and fluid flow in Sitka spruce. - Part 1: The drying process of sapwood and heartwood of two different thickness of Sitka spruce using a kiln. - Part 2: Effects of moisture content on longitudinal permeability of Sitka spruce in vertical variation of the tree
2000 - IRG/WP 00-40173
The characteristic role of the moisture content in Sitka spruce (Picea sitchensis (Bong.) Carr.) that grown in the United Kingdom was examined by this study on the basis of (1) the reduction of moisture content in two different thickness of sapwood and heartwood by kiln drying process, and (2) the effects of moisture content to the longitudinal void volume filled of tanalith-C by the full-cell process from base (1 m) to apex (3 m) of the tree in sapwood zone. Accordingly, conclusions on indication of the drying process of sapwood and heartwood, and vertical variation of longitudinal flow with effects of moisture were listed separately: (1) Comparison of Drying Characteristic of Sapwood and Heartwood: The two different thickness (300x30x30 mm3 and 300x20x20 mm3) of sapwood and heartwood of Sitka spruce was dried using the suggested drying schedule in kiln. The reduction of moisture was schematically diagrammed according to sapwood and heartwood stakes. The reduction of moisture followed the same downward trend that sapwood (S) loses more moisture than heartwood (H) although the small stakes of S and H lost moisture rapidly compared with the large ones. (2) Vertical Variation of Moisture Content and Longitudinal Permeability: The 90 kiln dried defect free sapwood stakes (150x25x25 mm3) of Sitka spruce was taken from base to apex of the trees at 1, 2 and 3 m above ground level. After having the determination of moisture content in each experimental stake, the treatment was carried out by the full-cell process with CCA preservative (Tanalith-C) using a model pressure treatment plant. Significant differences observed among the tree heights from 1 to 3 m showing that slightly increases of moisture content from base to apex and conversely decreases of longitudinal void volume filled by preservative fluid.
I Usta


Research on the effects of wood preservatives on the physical and mechanical properties of Iranian beech (Fagus orientalis Lipsky)
1985 - IRG/WP 3351
This research work was conducted with the aim of using preservatives such as Basilit and Wolman Salts with Iranian beech and to study any physical and mechanical changes these might have on the beech species of Iran. Samples were divided into three groups; one group were used as untreated controls, the second group was treated with Basilit and the third group was treated with Wolmanit. Results obtained according to the AFNOR French system of standards were: (1) After 140 days the moisture content of each group had reached 7.3%. (2) Samples with Wolmanit absorbed twice as much as those with Basilit and the two groups has some differences in specific gravity. (3) The volumetric shrinkage of wood preserved with Wolmanit was one fifth of that treated with Basilit. (4) In bending tests the samples treated with Wolmanit had more strength up to point of rupture than those preserved with Basilit. (5) The modulus of elasticity was more in samples preserved with Basilit than in those preserved with Wolmanit. (6) In compression parallel to the grain the samples impregnated with Basilit had more resistance than in those impregnated with Wolmanit. (7) In tension tests, the samples preserved with Basilit were stronger than those treated with Wolmanit. (8) In impact bending tests, the Basilit samples were stronger than the the Wolmanit ones. (9) In hardness tests, the resistance to indentation was less with the samples treated with Basilit than with those treated with Wolmanit; the Basilit seems to make the wood softer and from this result this type of treated wood could be recommended for use by carpenters and in woodworking shops.
P Niloufari


Differences in feeding activity among colonies of Formosan subterranean termite Coptotermes formosanus Shiraki
1983 - IRG/WP 1202
Feeding activities of 7 colonies of the Formosan subterranean termite, Coptotermes formosanus Shiraki, were examined. Wood-consumption rates among colonies differed significantly, ranging from 23.80-78.48 mg/g/day. This large intraspecific variation raised a question of whether differences in feeding activity reported for other termite species were due to interspecific differences. When rates were expressed as mg wood consumed by one g termite per day (mg/g/day), termites of larger body weight appeared to consume less wood. This negative correlation, however, was not significant when rates were expressed as mg wood consumed by an individual per day (mg/worker/day).
N-Y Su, J P La Fage


The effect of temperature on the rate of fixation of an alkyl ammonium compound (AAC) wood preservative
1984 - IRG/WP 3293
The rate of fixation of an alkyl ammonium compound wood preservative was measured by soaking samples of wood wool in various preparations of the preservative for arbitrary times followed by immediate leaching in water. The wood wool was then analysed for residual preservative. The results indicated that fixation was very rapid and increased at higher temperatures.
P Vinden


Monographic information on Serpula (Poria) incrassata according to the "Model Questionnaire for preparation of monographic cards for wood-destroying fungi"
1980 - IRG/WP 160
J G Palmer, W E Eslyn


Leaching tests - A paper for discussion
1973 - IRG/WP 221
J W W Morgan


Checking of sodium pentachlorophenate fixation in wood
1990 - IRG/WP 3620
In order to estimate the volatilization of sodium pentachlorophenate from treated wood, wood samples treated with pentachlorophenate were analysed after various durations of an EN 73 weathering The results giving no clear evidence of volatilization, treated wood samples were put in a test chamber with precise climatic conditions, the air used in the experiment being analysed. The pentachlorophenate content in air was quantified: 1.8 µg/m³
M Lamour, H Sageot


Development of novel techniques for evaluating the feeding rate of Limnoria lignorum with specific reference to temperature influences
1999 - IRG/WP 99-10325
The faecal pellet production of Limnoria lignorum placed into repli-dish chambers containing seawater and a small chip of untreated Corsican pine (Pinus nigra) was observed. The repli-dishes were kept at a range of constant temperatures between 10 and 25°C and the number of faecal pellets produced by each of the animals was monitored. It was found that faecal pellet length generally increased with gut length and that temperature had no effect on the faecal pellet length. There was considerable variation in faecal pellet production rates, both from day to day for any particular animal and from animal to animal. Faecal pellet production rate was generally highest between 15 and 21°C and decreased above 22°C. The production of faecal pellets tended to decrease during moulting. Gut passages per day increased from 1.1 at 13°C to 3.4 at 21°C followed by a decrease to 1.6 at 25°C.
A Praël, S M Cragg, R A Eaton


Molecular studies on isolates of Serpula lacrymans
1989 - IRG/WP 1421
The major protein species present in detergent extracts of 14 different Serpula lacrymans isolates have been compared, by sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS-PAGE), with a standard strain, viz. Serpula lacrymans FPRL 12C. Following silver staining of SDS gels the major protein species identified in 12 isolates were similar to those found in the standard strain. However differences were found when the final two isolates were compared with FPRL 12C, both isolates had extra molecular species not present in 12C and both were lacking some present in the standard strain. Comparison of the protein species identified in Serpula lacrymans isolates with those identified in extracts of other fungal organisms, viz. brown and white rot causing basidiomycetes and non-basidiomycetes indicated that the Serpula isolates were more similar to each other than to other organisms. Some molecular differences could be identified when individual isolates were cultured on different media, i.e. liquid culture or agar, only minor differences were seen when individual isolates were subcultured. These results indicate that whilst care must be taken to ensure as near identical conditions as possible for culture of organisms if their molecular species are to be compared by SDS-PAGE and silver staining, consistent results can be obtained using this technique. The technique may therefore offer a method of distinguishing between isolates, strains and species of wood decay basidiomycetes, and identifying new isolates.
A Vigrow, D Button, J W Palfreyman, B King, B M Hegarty


The rate of redistribution and loss of leachable preservatives under service conditions
1993 - IRG/WP 93-30026
This paper describes experiments carried out to determine patterns of preservative redistribution and any associated losses which occur when wood containing unfixed water-soluble wood preservatives is exposed to service conditions where leaching is possible. Scots pine sapwood treated with disodium octaborate was used as a model system. Results are recorded and discussed for trials representing painted joinery out of ground contact and unpainted stakes half buried in the ground. The results indicate that in the painted samples out of ground contact the water-soluble compound was redistributed longitudinally and away from the joint zone during the first months of exposure, although little redistribution occurred laterally. No difference in redistribution patterns could be associated with paint type. Ground contact stakes showed a loss in the water-soluble compound of about 40% in the first six months exposure. Most of this appeared to occur from the surface zones of the stake exposed to the weather, particularly from the extreme top. In addition, the compound appeared to migrate upwards from the below-ground portion of the stake to the above-ground portion. These results provide new information on the extent of movement of water-soluble preservatives in painted, jointed timber out of ground contact and in unpainted timber in ground contact. It is concluded that the long-term significance of the observed redistribution effects for painted joinery should be evaluated to confirm that there is no likelihood of shortcomings in performance in practice. For the ground contact situation, results confirm that rates of redistribution and loss are high enough to indicate inappropriateness of such materials for practical use without associated technologies to reduce mobilities.
R J Orsler, G E Holland


Identification card for Coriolopsis polyzona (Pers.) Ryv
1977 - IRG/WP 161
A Ofosu-Asiedu


A behaviour of CCA penetration of fir (Abies bornmulleriana Mattf.) at different ramp times and constant vacuum/pressure applications
2006 - IRG/WP 06-40346
A behaviour of CCA penetration of Bornmulleriana fir (Abies bornmulleriana Mattf.) at different ramp times and constant vacuum/pressure applications was illustrated for the main flow directions by the experimental pictures.
I Usta, R Despot, M Hasan


Next Page