Your search resulted in 44 documents. Displaying 25 entries per page.
How carbon stored in harvested wood products contribute in a greenhouse gas accounting perspective
2017 - IRG/WP 17-50327
In 2014 the net annual removal by Norwegian forests was 30.4 mill ton CO2-eqvivalents while the emissions in other sectors was 53.2 mill ton CO2-eqvivalents. Hence, forests can play a major role in the national greenhouse gas balance. But forests also contribute to the carbon pool stored in wood products. The aim of this paper is, by using Norway as an example, to illustrate how the greenhouse gas emission reporting of harvested wood products (HWP) are performed, what results it provides and what the trends are. According to the Norwegian convention reporting to United Nations Framework Convention on Climate Change (UNFCCC) the total Norwegian HWP pool served as a sink (net annual removals) until 2009, thereafter it has served as a source (net annual emissions). Why? The main reason is that since 2006 the number of paper factories in Norway has declined. This has resulted in a drastic reduction of export of paper and paperboards. Additional reasons for the change are periods with reduced use of sawnwood domestically and increased import at the expense of domestic production. The finance crisis in 2008 – 2009 resulted in a temporary marked drop in production value and downscaling of Norwegian production.
G Alfredsen, G Søgaard
Effect of acetylation on decay resistance of wood against brown-rot, white-rot and soft-rot fungi
1989 - IRG/WP 3540
Effect of acetylation on decay resistance of wood was investigated using wood blocks of Cryptomeria japonica, Pinus densiflora, Albizia falcata and Fagus crenata. Blocks were treated with uncatalyzed acetic anhydride for different lengths of time and exposed to Tyromyces palustris, Serpula lacrymans, Coriolus versicolor and unsterilized soil. The action of OH-radical on acetylated wood was also examined using Fenton's reagent. The enhancement of decay resistance by acetylation was revealed clearly for all cases of exposures but varying with fungal and wood species used. For a brown-rot fungus Tyromyces palustris, the weight loss reached almost nil in all woods at 20 WPG (weight percent gain) of acetylation, after the striking decrease from 10 to 15 WPG. For a white-rot fungus Coriolus versicolor, it was counted until 12-15 WPG in the perishable hardwoods used, but not in a softwood Cryptomeria japonica, even at 6 WPG. In cases of another brown-rotter Serpula lacrymans and soil burial, effect of acetylation was intermediate between Tyromyces palustris and Coriolus versicolor. Anti-degradation mechanism by acetylation was discussed, from these weight loss - weight gain relationships, and the IR-and 13C-NMR spectral analyses of fungus-exposed wood.
M Takahashi, Y Imamura, M Tanahashi
Preliminary study of the fungicidal and structural variability in copper naphthenates and naphthenic acids
1996 - IRG/WP 96-30114
Copper naphthenates, an oil-borne wood preservative listed by the American Wood-Preservers' Association (AWPA), is manufactured by complexing copper(II) with naphthenic acids. Prior to AWPA listing as a wood preservative, field experiments showed that copper naphthenates generally had good stability and were active against wood-destroying organisms. Recently, however, there have been reports of some copper naphthenate-treated poles rapidly failing. One possible explanation for the varying effectiveness could be that the structure, and resulting biological activity, of the naphthenic acids used to make copper naphthenate may vary. To test this hypothesis several naphthenic acids and copper naphenates were obtained and their fungicidal activity against three wood-destroying fungi measured. In addition, the chemical structure of the naphthenic acids were examined by proton- and carbon- NMR. Different activities were observed, especially against a copper-tolerant fungus. Some apparent correlations were seen between the fungicidal activity and chemical structures for the few samples studied.
T Schultz, D D Nicholas, L L Ingram Jr, T H Fisher
Respiration methods used to follow the decay of wood and the toximetric evaluation of wood preservatives
1975 - IRG/WP 249
When wood is attacked and decayed by fungi, wood substance and oxygen (02) are consumed, while carbon dioxide (CO2), water and heat are liberated. Early in the 1960's workers from England, Canada and Sweden began studying CO2 evolution, with respect to decay and its control using chemical preservatives, while in Germany and the USA O2 utilization was being similarly examined. Oxygen consumption measurements during the decay of wood were made mainly using pressure differential closed systems and were shown to be reasonably sensitive and a suitable reflection of the rate and extent of decay. Carbon dioxide measurements were made using titration, conductivity and gas-chromatographic methods. The last method appears to be the most useful, being applicable to open and closed systems, flexible in application, very sensitive over a thousand-fold concentration range change without switching, and easily automated. Its application to evaluating the toxicity of wood preservatives has been intensively studied and shown to give chemical toxic thresholds after only one third of the normal incubation time, which are similar to those based on the much longer conventional weight loss method.
R S Smith
Effect of fatty acid removal on treatability of Douglas-fir
1993 - IRG/WP 93-40008
Treatment of Douglas-fir with chromated-copper-arsenate (CCA) poses a major challenge. Several hypotheses based on the anatomical aspects as well as chemical reactivity of the preservative formulations with cell wall constituents and deposits have been proposed. Techniques to prevent pit aspiration or slow fixation reactions have, however, not significantly improved treatment. The presence of high molecular weight fatty acids have been reported to be responsible for higher hydrophobicity in some wood species. These acids can react with Cu+2/Cr+3 ions to form insoluble metallic soaps, thereby immobilizing Cu/Cr and increasing wood hydrophobicity by a mechanism similar to that employed in paper sizing. The effect of fatty acids on treatability was explored by removing these components via several extraction methods. In general, extracted wood had higher gross solution absorptions and chemical retentions, but preservative penetration was largely unaffected. The results suggest that removal or disruption of fatty acids can improve treatability of Douglas-fir heartwood.
S Kumar, J J Morrell
Extracellular layers of wood decay fungi and copper tolerance
1983 - IRG/WP 1180
Extracellular layers around the hyphae of brown, white and soft rot fungi have been examined using electron microscopy. These layers were isolated for identification. Particular interest was directed towards the extracellular layers of copper-tolerant soft rot fungi.
D M Francis, L E Leightley
An insight into brown rot decay of timber as revealed by 13C CP/MAS NMR
1985 - IRG/WP 1259
L E Leightley
The use of C CP/MAS NMR in the chemical identification of decayed and undecayed, tropical timber species
1984 - IRG/WP 1224
13C CP/MAS NMR was found to be an extremely powerful tool for elucidating the chemical composition of Eucalyptus maculata, Pinus elliottii and Alstonia scholaris. The differences in lignin composition were different for each timber and discussed in relation to decay caused by soft-rot and white rot fungi. In particular the presence of syringyl and guaiacyl lignin types are discussed.
L E Leightley
The effect of selective additives and conditions on the decomposition of Basamid in Douglas fir heartwood
1992 - IRG/WP 92-3698
Basamid is a solid, powdered chemical used as an agricultural soil fumigant. Decomposition of Basamid isothiocyanate, hydrogen sulfide, methyl amine, and formaldehyde. Basamid has some potential as a wood fumigant, but it decomposes too slowly to be effective. Various additives and conditions were tested for their ability to enhance Basamid decomposition in Douglas-fir heartwood. Higher MC's and temperature, as well as copper sulfate and powdered pH 12 buffer increased decomposition rates with copper increasing the efficiency of breakdown to form MITC.
P G Forsyth, J J Morrell
The distribution of introduced acetyl groups and a linseed oil model substance in wood examined by microautoradiography and ESEM
2000 - IRG/WP 00-40169
Microautoradiography, a photographic method that shows the localization of substances labelled with radioactive isotope, and Environmental Scanning Electron Microscopy (ESEM) were combined to enhance sensitivity, resolution and reliability for examination of the distribution of introduced substances in wood. The preparation of microautoradiographs is less complicated when investigated with ESEM and the preparation of ESEM-samples is quick and easy compared to a conventional SEM. When investigating microautoradiographs with ESEM, the wood structure is observed underneath the almost transparent photographic film. Silver grains, indicating the location of studied substances, are clearly distinguish from the wood material. The technique was used in two case studies for examination of cell wall penetration and distribution in pine sapwood. The distribution of acetyl groups, introduced by acetylation with acetic anhydride, and the distribution of a linseed oil model substance, triglycerol trioleate, were examined. Examinations of introduced acetyl groups showed an even distribution of acetyl groups in the wood cell wall at acetylation level of about 5, 15 and 20% (weight gain). Examination of the linseed oil model substance, glycerol trioleate, showed the presence of the model substance on applied surfaces, in rays and in lumen of some latewood cells. No cell wall penetration was observed.
Distribution of cellulases in the body of Coptotermes formosanus and the probability that the termite uses glucose as an energy and carbon sources
1997 - IRG/WP 97-10202
We assayed extracts of the digestive system and of the whole body of Coptotermes formosanus to determine where the various cellulases, glucose, and related substances were concentrated and to detect pyruvate dehydrogenase activity in the hindgut-removed body in order to verify its full cellulolytic system. About 20%, 18% and 36% of the total exo-1,4-ß-glucanase activity of C. formosanus were detected in the salivary glands, midgut, and hindgut, respectively. About a third of the total endo-1,4-ß-glucanase activity in the termite was detected in the salivary glands (34.5%) whereas the activities in the midgut and hindgut were 21.1% and 18.2%, respectively. About 75% of the total ß-D-glucosidase activity in the termite was detected in the midgut. Thus all the necessary cellulases for hydrolysis of natural cellulose to glucose were present in the region ranging from the salivary glands to the midgut in significant amounts. Most of the glucose and trehalose detected in the termite existed in the gutted-body. Most of the glucose detected in the gut existed in the midgut. Pyruvic acid was directly converted to acetyl-CoA in the presence of NAD+ by a crude extract of the gutted-body. These results suggest that natural cellulose ingested by the termite is hydrolyzed to oligosaccharides in the region of the foregut and midgut as well as in the hindgut, that oligosaccharides are hydrolyzed to glucose predominantly in the midgut, and that the resultant glucose is absorbed through the midgut wall into the tissues to be used as important energy and carbon sources.
S Itakura, H Tanaka, A Enoki
The chemical analysis and biological evaluation of wood extractives as potential timber preservatives
1995 - IRG/WP 95-30090
Work involved the biological performance of water and organic solvent soluble extractives of four naturally durable wood species, namely; Matumi, Tamboti, Sneezewood and the Turpentine tree. These timber species are known to be naturally durable against termites and fungi (±25 to 35 years). The extractives were evaluated against termites and fungi using impregnated pine pencil stakes in field tests and soil burial trials over a 2 year period. C13NMR analysis of extractives isolated from the wood was carried out to try and identify the key chemical components which might impart durability with a view to prediction of new potential wood preservative formulations.
P Turner, D Conradie
Bending properties of TCMTB-treated Southern pine sapwood using supercritical carbon dioxide impregnation process
1997 - IRG/WP 97-40080
The effects of elevated pressure and treatment with thiocyanomethylthiobenzothiazole (TCMTB) on the bending properties of Southern pine sapwood were evaluated at pressures ranging from 1,800 to 3,600 psi. All bending properties were affected to some extent by supercritical fluid treatment. Modulus of elasticity and work to maximum load were not significantly affected by pressure levels. Modulus of rupture differed among individual pressure levels, but the effects on bending strength were less definitive. TCMTB retention had little or no effect on properties, suggesting a lack of chemical interactions between the lignocellulosic matrix and this biocide. The effect of treatment on bending properties was unexpected as previous trials on smaller specimens and selected composite panels had shown no negative effects. Further trials of other wood samples with increased replication are planned to more fully understand potential treatment effects on strength properties.
Gyu-Hyeok Kim, S Kumar, E S Demessie, K L Levien, J J Morrell
Wood extractives as carbon sources for staining fungi in the sapwood of lodgepole pine and trembling aspen
1995 - IRG/WP 95-10098
Wood discoloration by sapstaining fungi reduces lumber value. In Canada, the most commonly recorded sapstaining fungi belong to the genera Ophiostoma. This work evaluated the effect that Ophiostoma piceae, Ophiostoma ainoae, and Ophiostoma piliferum used the lipids present in the sapwood of lodgepole pine (Pinus contorta Dougl.) and trembling aspen (Populus tremuloides Michx.). Wood lipids, commonly known as extractives, consist mainly of triglycerides, fatty acids, resin acids, sterols, steryl esters and waxes. The sapwood of lodgepole pine and trembling aspen was rich in triglycerides. All the sapstaining fungi tested were able to degrade the triglycerides in both of the wood species very effectively. The fatty acids, steryl esters and waxes were used slowly, especially in lodgepole pine. The fungi could also decrease the level of resin acids in lodgepole pine.
Yong Gao, C Breuil
Distinguishing isolates of Aureobasidium on the basis of their ability to utilise lignin breakdown products as a sole carbon source
1996 - IRG/WP 96-10151
Wild isolates of Aureobasidium were obtained by dilution plating from a ca 20 year old painted pine window frame. Four isolates were obtained from the paint/wood interface region and four isolated from regions deep in the wood. The isolates were then used to inoculate liquid cultures containing ferulic acid, a lignin breakdown product, present as the sole carbon source. Ability of the isolates to use ferulate, judged by fungal yield, viable propagule count and absorbance at 280 nm (a measure of the aromatic's final concentration) was dependent on the site of isolation. Isolates from the paint/wood interface were consistently better at utilising ferulate than those isolated from deep in the wood and a possible reason for this is suggested.
M W Schoeman, D J Dickinson
Termite Field Tests of Various Timber Species Treated with permethrin using supercritical carbon dioxide
2005 - IRG/WP 05-10560
Termite field tests were conducted on permethrin-treated Eucalyptus obliqua heartwood, Pinus radiata sapwood and P. radiata LVL. The permethrin was impregnated using either supercritical carbon dioxide (scCO2) or light organic solvent preservative (LOSP) systems. Comparative permethrin retentions were most accurately achieved in P. radiata sapwood, where no difference between impregnation systems was found in performance against Coptotermes acinaciformis, and a minor difference in favour of scCO2 was found against Mastotermes darwiniensis. P. radiata LVL specimens treated using scCO2 performed slightly better than those impregnated with LOSP, reflecting slightly higher permethrin uptakes in the former. E. obliqua heartwood was completely destroyed by M. darwiniensis when impregnated with LOSP but was mostly sound when scCO2 was used, suggesting improved uniformity of penetration by the latter treatment.
A Qader, L J Cookson, J W Creffield, D Scown
Utilization of nitrogenous substance by Serpula lacrymans
1989 - IRG/WP 1397
When Serpula lacrymans degrades wood, the fungus is considered to have to assimilate nitrogen, which is not abundant in the wood, from the third material. The strands/mycelium has grown into the soil under the floor of the wooden house damaged by the dry rot fungus. The authors analyzed the soil samples collected from the ground under the floors of the dryrotted houses. The samples which were collected from the ground covered with the strands/ mycelium of the fungus contained less quantity of nitrogen than the ones from the ground not covered with them.
S Doi, I Togashi
Cellular and fractural failure after supercritical fluid impregnation of four wood species
2004 - IRG/WP 04-10503
Supercritical fluids (SCFs) have been investigated for delivering biocides into sawn wood. Pressure differentials during treatment may exceed the compressive or tensile strength perpendicular to grain, creating a potential for transverse deformations that exceed elastic strain limits. Wood treated by SCF processing with CO2, a potential biocide carrier, was inspected macroscopically and microscopically. Both cell wall damage and smooth fracture surfaces appeared in the cellular structure. Damage was related to the rates of pressurization and venting and appeared to be species-specific. Cell walls were damaged during pressurization, whereas fracture damage occurred during venting. Specimen dimensions, permeability and anatomical structure are critical variables in developing SCF processes for biocide treatment of wood and wood-based products.
M E Anderson, R J Leichti, J J Morrell
Applicability of supercritical carbon dioxide to the preservative treatment of wood-based composites
2001 - IRG/WP 01-40199
Treatability of five structural-use wood-based composites (medium density fiberboard, hardwood plywood, softwood plywood, particleboard and oriented strand board) was evaluated when supercritical (SC) carbon dioxide (CO2) was used as a carrier solvent. Treatments were conducted at three temperature 32 levels (25, 35 and 45°C) and two pressure levels [80 kgf/cm2 (7,845 kPa) and 120 kgf/cm2 (11,768 kPa)]. Although small changes in weight and thickness of the wood-based composites were caused by treatments with SC-CO2, all treated materials did not sustain any physical damage. These results suggest that the treatment conditions provided the immediate penetration of SC-CO2 into the wood-based composites without any critical pressure gradient between outer and inner zones. Strength properties of the treated wood-based composites significantly improved after treatments in most cases. In contrast, a remarkable drop in strength properties occurred in oriented strand board specimens. Further studies are underway to determine the optimum treatment conditions using biocides incorporated into the mixing or treating vessel.
M Muin, A Adachi, K Tsunoda
Preservative treatment of wood-based composites with a mixture formulation of IPBC-silafluofen using supercritical carbon dioxide as a carrier gas
2003 - IRG/WP 03-40251
Wood-based composites treated with a mixture formulation of a fungicide, 3-iodo-2-propynyl butylcarbamate (IPBC) and a termiticide, silafluofen using supercritical carbon dioxide (SC-CO2) as a carrier solvent were tested for their resistance to decay and termite attack in the laboratory. The treatment solution was prepared by mixing both biocides (IPBC 10 + silafluofen 1) with a co-solvent, ethanol to have an identical ratio of each constituent in the commercial formulation for superficial treatment of wood. SC-CO2 treatments were conducted at 35oC/7.85 MPa, 35oC/9.81 MPa and 55oC/11.77 MPa with a direct introduction of the biocidal solution into the treatment vessel where specimens (210 x 30 mm x thickness) of medium density fiberboard, hardwood plywood, softwood plywood, particleboard and oriented strand board were placed. Laboratory tests were conducted with the treated materials according to Japanese standard methods. Results of laboratory tests indicated that the current treatment conditions significantly enhanced the resistance of the treated wood-based composites against fungal and termite attacks. Comparison with the results obtained for wood-based composites treated with an individual biocide showed that treatment with a mixture would not cause any negative effect to the efficacy of each biocide, although the amount of each constituent in a mixture formulation must be carefully decided to provide wood-based composites with a satisfactory performance against any biological degradation when SC-CO2 is used as a carrier solvent.
K Tsunoda, M Muin
Extracellular mucilage (ECM) in wood decay basidiomycetes
2002 - IRG/WP 02-10439
The ability of wood decay basidiomycetes to produce extracellular mucilage (ECM) and its relationship with total biomass production is being investigated. Growth and ECM production by the brown-rot fungus Gloeophyllum trabeum (FPRL 108 N) and the white-rot fungus Coriolus versicolor (CTB 863 A) was assessed in liquid culture under different conditions and in the presence of the fungicide cyproconazole. The production of biomass in G. trabeum was significantly influenced by the carbon source, monosaccharides stimulating increased biomass compared with oligosaccharides and polyols. The nitrogen source also significantly affected biomass production, with arginine and L-glutamic acid supporting maximum biomass. The best temperature for growth was 30°C, lower temperature causing a significant reduction in biomass production. The pH optimum for maximum growth was found to be 4.0. ECM production was influenced significantly by the nitrogen source, as well as by the pH of the medium and the temperature of incubation. The greatest proportion of ECM in the total biomass was produced by cultures incubated at 10°C (27% of the total biomass) and at pH 5.0 (16% of the total biomass). The same factors that affected the production of biomass and ECM in G. trabeum, also significantly affected C. versicolor. Again, simple monosaccharides supported the best growth. Amongst the nitrogen sources tested, L-glutamic acid stimulated maximum biomass production (double that of any other nitrogen source tested) whereas the greatest proportion of ECM in the total biomass was produced with arginine and isoleucine as nitrogen sources. The optimal temperature for growth was 22° C, whilst the optimum pH was 5.0. At 10°C the greatest proportion of ECM was produced, which represented about 24% of the total biomass. In terms of pH effects, the greatest proportion of ECM was produced at pH 6.0. The introduction of cyproconazole significantly reduced the amount of biomass produced by both organisms as expected. However, the production of ECM in both species was also affected greatly by the presence of biocide, with the proportion of ECM in the total biomass increasing significantly as the concentration of cyproconazole was raised. The results are discussed with regard to the possible role(s) of ECM in the decay process and its interaction with a specific organic preservative.
D Vesentini, D J Dickinson, R J Murphy
Performance of Oriented Strandboard, Medium Density Fiberboard, Plywood, and Particleboard Treated with Tebuconazole in Supercritical Carbon Dioxide
2005 - IRG/WP 05-30364
The performance of oriented strandboard (OSB), medium density fiberboard (MDF), particleboard and plywood treated with tebuconazole using supercritical carbon dioxide was investigated over a 48 month exposure under harsh above ground conditions in Hilo, Hawaii. Samples treated to low retentions (<0.20 kg/m3) tended to experience decay at rates that were only slightly lower than those found with untreated controls. This was particularly true with aspen OSB, which failed within 30 months regardless of treatment level. Most other samples treated to higher retentions remained free of fungal decay over the test period. Tebuconazole treated Douglas-fir plywood provided the best performance, demonstrating the benefits of combining a moderately durable heartwood with supplemental preservative treatment. The results indicate that SCF-treated wood provides reasonable performance in non-soil exposures under severe decay conditions.
J J Morrell, M N Acda, A R Zahora
Kiln drying of LSOP treated timber: rate of solvent evaporation, overpaintability and recovery of the solvent
1992 - IRG/WP 92-3711
The rate of solvent evaporation from LOSP treated timber dried in a kiln at 35°C has been investigated. Around 50% solvent removal has been found to be consistent with good overpaintability using a water based acrylic primer. It has been demonstrated that an activated carbon solvent recovery system is capable of removing all the solvent vapour from the outlet of a commercial joinery drying kiIn, that the solvent is subsequently recoverable using steam and that the recovered solvent is suitable for re-use.
P Warburton, L B Sheard
An unusual soft-rot decay pattern caused by the Ascomycete Hypoxylon mediterraneum (de Not.) J Miller
1984 - IRG/WP 1222
A distinct pattern of soft-rot decay has been observed for the fungus Hypoxylan mediterraneum (de Not.) J. Miller. This fungus also produced decay patterns typical of brown and white rot decay. The production of characteristic cavities by Hypoxylan mediterraneum was prolific in the hardwoods Eucalyptus maculata and Eucalyptus regnans, but infrequent in the softwoods, Pinus elliottii and Pinus radiata. The chemistry of this decay was investigated using carbon-13 nuclear magnetic resonance (13C-NMR). This technique produced results valuable to the understanding of the timber decay activities of Hypoxylan mediterraneum.
D M Francis, L E Leightley
Development of preservative treatment method using sub and super critical carbon dioxide
2007 - IRG/WP 07-40385
Significant efforts have been devoted for developing biocide impregnation method into wood materials using supercritical fluid. Developing better understandings of fluid phase and its effect on treatment results would facilitate a more rational development of supercritical fluid (SCF) impregnation. In this project, the preservative treatabilities under super- and sub-critical fluid conditions were evaluated using Pinus Radiata sapwood. Treating characteristics are discussed in relation to different fluid phases and treatabilities (biocide penetration, distribution, and retention).
Myeung-Won Cho, Sung-Mo Kang, Gyu-Hyeok Kim